Makita DS4010 Instruction Manual
Hide thumbs
Also See for DS4010:
- Instruction manual (40 pages) ,
- Technical information (8 pages) ,
- Instruction manual (32 pages)
Subscribe to Our Youtube Channel
Related Manuals for Makita DS4010
Summary of Contents for Makita DS4010
- Page 1 INSTRUCTION MANUAL Drill DS4010 DS4011 DS5000 011308 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
Designation of Machine: to EN60745: Drill Sound pressure level (L ) : 81 dB(A) Model No./ Type: DS4010, DS4011, DS5000 Sound power level (L ) : 92 dB(A) are of series production and Uncertainty (K) : 3 dB(A) Conforms to the following European Directives:... -
Page 3: General Power Tool Safety Warnings
Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd. Keep cord away from heat, oil, sharp edges or Michigan Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock. -
Page 4: Functional Description
"OFF" position when released. parts. This will ensure that the safety of the power For Model DS4010 tool is maintained. 26. Follow instruction lubricating 1. -
Page 5: Operation
To stop the tool from the locked position, pull the switch tighten all three chuck holes evenly. trigger fully, then release it. To remove the bit, turn the chuck key counterclockwise in For Models DS4011 and DS5000 just one hole, then loosen the chuck by hand. After using the chuck key, be sure to return to the original CAUTION: position. -
Page 6: Maintenance
If you need any assistance for more details regarding MAINTENANCE these accessories, ask your local Makita Service Center. Drill bits • Hole saws CAUTION: • Angle attachment Always be sure that the tool is switched off and • • Chuck key unplugged before attempting to perform inspection •... - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884975-225...
Need help?
Do you have a question about the DS4010 and is the answer not in the manual?
Questions and answers