How To Modify The Settings - Omron IntelliSense IW2 Instruction Manual

You can modify the options for the various settings of your monitor. This is
done by pressing the SET button to select a setting, then pressing the MEM
button to select the options for that setting. After selecting a setting, press the
START/STOP button to turn the power off.
Turning the Position Sensor On/Off
1. Press the SET button until the Position Sensor
Symbol (
2. Press the MEM button to select "on" or "oFF". When "on" is selected, the
monitor displays symbols to indicate how close your wrist is to the correct
measuring position.
Setting the Position Sensor Alarm
1. Press the SET button until the Position Sensor
Alarm Symbol (
The default settings is "on1", and this emits a
series of two short blips if your wrist is too far
away from the measuring position, and beeps
slowly when you wrist is in the correct position. When "on2" is selected
the alarm only beeps when your wrist is in the correct position.

How to Modify the Settings

) appears on the display.
) appears on the display.
16