How To Take A Reading - Omron IntelliSense IW2 Instruction Manual

Correct Usage

How to Take a Reading

1. Sit comfortably, hold your arm across your chest
and relax.
2. Press the START/STOP button.
3. Hold your arm across your chest so that your fingers are touching the
opposite shoulder.
Adjust the height of your wrist until the position sensor alarm beeps slowly.
When the monitor senses that your arm is in the correct position, the wrist
cuff will automatically start to inflate and measurement starts.
Notes:
* If your wrist is too low or too high, the position sensor alarm will emit a
series of two short bleeps similar to a heartbeat.
* Sit still and do not talk or move until the measurement is completed.
* Keep the monitor at heart height until the measurement is completed.
* To stop measurement, press the START/STOP button at any time during
measurement.
How to Take a Reading
11