Password In Parental Controls; Using Quick Start Function; Bluetooth Function; Blue Light Filter - TCL 98C655 Series Operation Manual

standby mode when you turn off the TV with the TV
remote. Press OK to turn it on to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some devices may not
interoperate correctly when connected to this TV. The
user manual or the manufacturer of the problematic
devices should be consulted for further information.

Password in Parental Controls

- Set the password in the
Parental Controls menu.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.

Using Quick start Function

It enables you to turn on your TV faster from standby
mode than turning this function off, but it will also
increase standby power consumption.
1. Press on the remote control, select
> System > Power and Energy > Quick start and
press OK /
to enter.
2. Select the Quick start option and press OK to
toggle between on and off.
3. Press
to return to the previous menu.

Bluetooth Function

(* not available for some models)
Bluetooth is a wireless technology standard for
®
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press on the remote control
>
Remotes and Accessories and press OK to
enter.
2. Select Pair accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV)
(Settings) > System >
(Settings)
(Settings)
, select
Using More of Your TV
uses 2.4GHz frequency thus close proximity to Wi-
Fi access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you face
interruptions in audio reception, you should restart
your Bluetooth device to find frequency with less
interferences and if you continue to face issues you
should move closer to TV or increase space between
TV and source of interferences.
The Bluetooth word mark and logos are registered
®
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their
respective owners.

Blue Light Filter

It reduces the amount of blue light emitted by the
screen, which can reduce the visual fatigue associated
with screen viewing.
1. Press
on the remote control to display the
dashboard, select Picture > Advanced Settings >
Color and press OK /
2. Select the Blue Light Filter option, and press OK to
toggle between on or off.
Notes:
- After watching TV for half an hour, please move
away from the TV and rest your eyes.
- When resting, please look far away to adjust the
ciliary muscles of the eye to avoid eye strain.
- Please form a good habit of doing eye exercises
to protect eyesight and prevent myopia.

Reset Shop

Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select
System > About > Reset > Factory reset and press
OK to enter.
2. Select the Factory reset option and press OK to
enter. Then select Erase everything and
to confirm.
3. Enter the password you have set or the PIN
according to the on-screen prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.

Multi Visual

Allows you to enjoy different programs with your family
on one TV at the same time.
The multi visual function is enabled by default. To use
the function, make sure your phone is Android OS and
the WiFi on the phone is turned on. Then follow the steps
below to operate.
13
to enter.
(Settings) >
press OK