Freeview; Netflix Settings; Reset Shop; Password In Parental Controls - TCL C635 Series Operation Manual

contents on large screen. It also allows you to turn a
smart device into a sophisticated remote control, provid-
ing more features than your normal TV remote control.
You can then control your TV through your smart
device.
Follow the on-screen instructions to scan the QR code
on the TV screen and download MagiConnect.
Note: Make sure the smart device and your TV are
in the same home LAN (local area network) or
network segment to use TV remote function.

Freeview

Never miss a thing with freeview!
Find out what's on now, next or over the next 7 days
with the easy to use TV guide.
Looking for your favourite show? Use Search for quick
access to all your favourite on demand from ABC iview,
SBS On Demand, 7+, 9Now and 10 Play.
All in one place, all for free.

Netflix Settings

Netflix provides on-demand movies and TV shows
delivered via the Internet. Netflix is available in certain
countries.Unlimited membership is required. More
information can be found at www.netflix.com <http://
www.netflix.com/>.
Note: You can directly access Netflix via clicking the
Netflix button on the remote control.

Reset Shop

Allows you to reset the TV to factory default settings.
1. Press on the remote control, select
System > About > Reset and press OK to enter.
2. Press Up/Down to select Factory Reset and press
OK to enter. Then select Erase Everything and
press OK to confirm.
3. Enter 1234 or the PIN according to the on-screen
prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.

Password in Parental Controls

- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.

Using the Hands-free TV Voice Control

(* not available for some models)
Note: This feature is only available in Google TV mode.
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access the
Using More of Your TV
Google website first. Then follow the steps below to
access.
1. Turn the built-in MIC switch (next to the power
button) to on before using this function.
1. In Google TV mode, press the Google Assistant
button on your remote.
2. Select "Yes, I'm in".
3. Say "Hey Google" to activate it.
Notes:
- The availability of hands-free TV voice control
depends on your region/country/language and your
model. For details, please refer to your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended using distance is
within 2 meters in front of TV set.
- Turn the built-in MIC switch to off if you are not
going to use it.
- Standby power consumption will increase because
the built-in MIC is always listening when the Google
Assistant or voice control with the built-in MIC is
enabled.
(Settings) >
15