Reolink K50 User Manual page 9

Set up your Doorbell in the app
1. Open the app and sign in to your account.
2. To add your camera, tap the Add device icon (+).
3. Choose Video Doorbell and then select the K50 model.
Video Doorbell
Press and hold the doorbell button until the red light
4.
starts flashing. You will hear Entering pairing mode.
The device supports only the 2.4GHz Wi-Fi network.
5.
Navigate to your cellphone's Wi-Fi settings, connect
to a 2.4GHz Wi-Fi network, and tap "Yes." (Note:
5GHz Wi-Fi is not supported).
For Connection Setup: Select your 2.4GHz Wi-Fi
6.
network name, input the password.
7. Tap Confirm.
Use the device's camera to scan the QR code on your
8.
phone.
Once you hear Device registration successful, you
9.
are all set.
Select Device
K50