HOMCOM 712-025 User Manual page 8

Step 4: To Adjust Height of Knee Platform:
Stand on your good leg, hold on to a steady surface for support, and bend the
leg that will be on the knee platform at a 90 degree angle.
Adjust the knee platform to meet the height of your bent leg. When you place
your bent leg on the knee platform, your uninjured foot should comfortably
reach flat on the floor, and your hips should be even. You should be in an
upright position as if you were standing normally.
- Remove start screw.
- Insert the knee platform post.
- Extend the knee platform to desired height.
- Then, insert star screw and tighten knob securely.
- 7 -