Omron CX-PROGRAMMER V8.1 Operation Manual page 141

Procedures
Right-click in the Watch
Window and select Paste.
Checking Programs within
Function Block Definitions
1,2,3...
Monitoring Instance
Variables in the Watch
Window
1,2,3...
116
Use the following procedure to check the program in the function block defini-
tion for an instance during monitoring.
Right-click the instance and select To Lower Layer from the pop-up menu.
The function block definition will be displayed.
Use the following procedure to monitor instance variables.
1. Select View - Window - Watch.
A Watch Window will be displayed.
2. Use any one of the three following methods to display the FB variables reg-
istration Dialog Box.
a. Right-click the instance and select Register in Watch Windows from
the pop-up menu.
b. Copy the instance and paste it in the Watch Window.
c. Right-click an empty row in the Watch Window and select Register in
Watch Windows from the pop-up menu.
Section 3-2
Select the variable in the ST
variable monitor window,
right-click, and select Copy.