Medium und den Betriebsbedingungen richten. Teile in • Druckzuluftqualität nach DIN 8573-1: 3-3-3 ordnungsgemäßer Weise zerlegen bzw. zusammenbauen. Dabei sind die Teile exakt anhand der mitgelieferten Explosionszeichnungen zu identifizieren und Änderungen vorbehalten – Besuchen Sie uns auf emerson.com...
Page 4
INSTALLATION SERIE 353, ZWEISTUFIG, EXTERNE VORSTEUERUNG, 1-1/2" SCHNITTZEICHNUNGEN Schnellmontageanschluss Clamp Rohranschluss mit Gewinde Änderungen vorbehalten – Besuchen Sie uns auf emerson.com...
Page 5
1. ALLE ABMESSUNGEN DIENEN NUR ALS REFERENZ 2. ANZUGSDREHMOMENT 11 Nm +/- 1Nm FÜR SCHRAUBEN. 3. ANZUGSDREHMOMENT 16Nm +/- 1Nm FÜR DIE SCHRAUBEN DER KLEMMHALTERUNG. ● ― OPTIONALE TEILE ● Ʌ Ʌ NOTE 3 Änderungen vorbehalten – Besuchen Sie uns auf emerson.com...
During servicing, components should be examined for excessive wear. A complete set of internal parts is available as a spare Visit our website at emerson.com Availability, design and specifications are subject to change without notice. All rights reserved.
INSTALLATION SERIES 353, DOUBLE STAGE, REMOTE PILOT OPERATED, 1-1/2" SECTIONAL DRAWINGS Quick connection Clamp Threaded pipe connection Visit our website at emerson.com Availability, design and specifications are subject to change without notice. All rights reserved.
2. TIGHTENING TORQUE 11 Nm +/- 1 Nm FOR SCEWS. 3. TIGHTENING TORQUE 16 Nm +/- 1 Nm FOR CLAMP ASSEMBLY SCREWS. ● ― OPTIONAL PART Ʌ Ʌ NOTE 3 Visit our website at emerson.com Availability, design and specifications are subject to change without notice. All rights reserved.
Page 10
INSTALLATION ASCO Numatics GmbH Otto-Hahn-Straße 7-11 75248 Ölbronn-Dürrn Germany www.emerson.com Visit our website at emerson.com Availability, design and specifications are subject to change without notice. All rights reserved.
Need help?
Do you have a question about the ASCO 353 Series and is the answer not in the manual?
Questions and answers