Altronix NetWay112X Installation Manual page 2

NetWay112X Port Status and LED Flash Codes
Port Status
Non-Powered Device
R
0Ω < PORT < 200Ω
R
Port Open PORT > 1MΩ
Port On 25kΩ
Low Signature Resistance
300Ω < R PORT < 15kΩ
High Signature Resistance
R
33KΩ < PORT < 500kΩ
Port Overload Fault
Unit should be tested at least once a year for the proper operation as follows:
While the NetWay112X is powered and the output is connected to a suitable UL Listed PoE device, it should
be tested for PoE shutdown operation (For UL 60950-1 applications only).
Refer to NetWay112X Port Status and LED Flash Codes above.
Parameter
No. of Ports
Input power
requirements
Indicators
PoE Shutdown
Voltage and
Current Range
Environmental
Conditions
Regulatory
Compliance
Weights (approx.)
Fig. 2 - PoE/PoE+ Camera Deployment.
Netway112X
Power
Input
- 2 -
Flash Code
OFF
OFF
ON
1 Flash
2 Flashes
5 Flashes
Troubleshooting:
Technical Specifications:
Description
One (1) PoE/PoE+ port
12VDC-16VDC @ 2A
Power/status LEDs
5VDC to 24VDC or 12VAC to 24VAC
Maximum current: 2mA for 5VDC
Maximum current for higher voltages: 10mA
Operating Ambient Temperature (UL60950-1): -40ºC to 50ºC (-40º to 122ºF).
Relative humidity: 85%, +/ - 5%.
Storage Temperature: -40º to 70ºC (-40º to 158ºF).
Operating Altitude: -304.8 to 2,000m.
CE European Conformity.
Product: 0.2 lb. (0.1kg) | Shipping: 0.25 lb. (0.11kg).
Typical Applications:
Network Switch
l l
Z
l
Z Z
l l l
Maintenance:
Port
shutdown
input
up to 100m
Flash Pattern
LED OFF
LED OFF
LED ON
l l l l
Z
l l l
Z Z
l
Z Z Z Z Z
l l l
Z
l l
Z Z
l l l l
PoE/PoE+ Camera
NetWay112X