Reolink D340P Quick Start Manual page 4

Set up the Doorbell
Set up the Doorbell on Phone
Step 1
Scan to download the Reolink
App from the App Store or
Google Play Store.
POE Micro SD
NOTE: If the Reolink App is already existed, please check if it is the
RST
newest; if no, please update it.
POE Micro SD
Step 2
RST
Power on the video doorbell.
PoE Version:
1. Power the doorbell on by connecting it to a PoE Switch/Injector or a
Reolink PoE NVR (not included in the package).
2. Connect the PoE Switch/Injector/Reolink PoE NVR to the LAN Port on
the router.
NOTE: The Reolink NVR should be upgraded to the latest firmware
version.
5 English
WiFi Version: Connect the Y-shape plugs to the screws on the back of the
doorbell, then power it on with the power adapter.
LAN Micro SD
RST
LAN Micro SD
RST
NOTE: It is recommended to setup the Internet before the installation.
Make sure the Y-shape plugs are separate from each other.
PoE Switch Router
English 6