In The Packaging; Technical Information - Parkside KH 3103 CORDLESS SCISSORS Manual

4_GB 18.08.2003 11:30 Uhr
Please read carefully through the following information concerning safety and proper use. Before
reading, fold out the page with the illustrations and make yourself familiar with all the functions
of the cordless scissors. Please read carefully through the following operating instructions
the accompanying safety advice
indicated. By doing this you will be able to work in complete safety and produce better results.
Be careful to keep these advice notes and if necessary pass them on to a third party.

IN THE PACKAGING

A. Cordless scissors
B. Charger / mains adapter
C. Charging station
D. These operating instructions, guarantee, CE and safety advice
FEATURES
On/off switch
Charging station
Cutting unit
Charging control light

TECHNICAL INFORMATION

A. Cordless scissors
Nominal voltage:
Nominal weight:
B. Charger:
Nominal voltage:
Charging time:
PROPER USE
The cordless scissors are intended for cutting the materials indicated below. The scissors can cut
through up to 1.5 mm cardboard, 4.0 mm paperboard and 3.0 mm leather. Any other use or
modification to the equipment shall be considered as improper use and could give rise to
considerable dangers.
SPECIFIC SAFETY ADVICE
• Before using your cordless scissors for the first time please read the section "Working safely".
• The batteries have been charged at the factory. During transport the batteries may lose some
charge, therefore they need to be charged for at least 24 hours before first use.
• Never operate the cordless scissors with the charger connected.
Seite 4
CORDLESS SCISSORS PAS 3.6
. Use the device only as described and for the purposes
3.6 V (3 x1.2 V NI-CD rechargeable batteries)
215 g
220 V ~ / 4.5 V
12 - 14 hrs.
4
and