Changing The Microphone Head - Sennheiser SKM 5200-II Instruction Manual

The battery pack is carefully charged using the
further details, please refer to the user manual of the L 50 charger.
LC display shown on the example of the BA 5000-2 battery pack
LOW BATT

Changing the microphone head

To change the microphone head of the SKM 5200-II:
Putting the radio microphone into operation
Place the appropriate charging adapter
in the charging compartment
charger.
Insert the BA 5000-2 battery pack into the
charging adapter
Charging time: approx. 2.5 hrs with the
L 50 charger (dependent on the residual
charge of the battery pack).
• 6-step LC display for (remaining) battery
pack capacity.
• Microprocessor-controlled
takes self-discharge of rechargeable cells
into account
• The maximum capacity of is reduced due
to natural ageing of the cells. The
BA 5000-2 battery pack measures the
maximum capacity and therefore displays
less than 100 % capacity for older cells –
even when they have been fully charged.
Unscrew the microphone head by turning
it in the direction of the arrow.
of the
.
U-method. For
electronics
11