Sennheiser SKM 300 G3 - 01-09 Instruction Manual page 14

You can switch the radio microphone on and
deactivate the RF signal on
information, see next section.
To switch the radio microphone off:
If necessary, deactivate the lock mode (see next
section).
Press the
ON/OFF
on the display panel. The red
MIC
When in the operating menu, pressing the ON/
OFF button
return you to the current standard display.
To switch the radio microphone on and to
RF signal on switch-on
Keep the
ON/OFF
On?" appears on the display panel.
Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon
The
function is activated on both radio microphone
and receiver,
display panel.
AF
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
To activate the
Briefly press the
ON/OFF
"RF Mute
Press the multi-function switch.
The transmission icon
ON/OFF
button go off. The display panel turns off.
cancel your entry (ESC function) and
(offline operation):
ON/OFF
MIC button
"RF
MHz
531.375
ew300 G3
P
MUTE
RF signal:
Off?" appears on the display panel.
Using the radio microphone
switch-on. For more
button until "OFF" appears
ON
button pressed until
is not displayed.
goes off. When the pilot tone
Mute" appears on the receiver's
ON/OFF button
is displayed again.
LED and the
deactivate the
"RF Mute
.
13