Aiwa HV-FX9000U Operating Instructions Manual page 31

3
Press ENTER/DISPLAY.
• The timer information appears on the TV screen.
• If you want to extend the recording time, see "To
extend the recording time" below.
PROGRAM 1 PROGRAM
MONTH
DAY
START
STOP
CHANNEL :
SPEED
REPEAT
TO ERASE PRESS
TO EXIT PRESS
4
Press i or k to select SPEED, then press j
or l to select the tape speed, SP, EP or AUTO.
If you select AUTO, the VCR determines remaining tape
length and switches the speed from SP to EP, if
necessary, to complete recording the program.
PROGRAM 1
MONTH
DAY
START
STOP
CHANNEL :
SPEED
REPEAT
SELECT
TO EXIT PRESS
5
Press i or k to select REPEAT, then press j
or l to select ONCE, WEEKLY or DAILY.
ONCE: for a single program
WEEKLY: for a weekly program such as every Friday
DAILY: for a daily program from Monday to Friday
PROGRAM 1
MONTH
DAY
START
STOP
CHANNEL :
SPEED
REPEAT
SELECT
TO EXIT PRESS
6
If you want to set another program, repeat from
step 1.
7
Press MENU to return to the normal screen.
8
Press POWER to turn off the VCR.
• "TIMER" appears in the display window, and the VCR
stands by for timer recording.
• If the cassette-in indicator flashes, a cassette is not
inserted. If the cassette-in indicator flashes and the
cassette is ejected, the cassette's erasure prevention
tab is removed.
To extend the recording time
After step 3, press i or k to select STOP, then press j or
l to change the end time.
: JULY
: 7 FRI
: 6 : 30 AM
: 7 : 30 AM
41 T V
: AUTO
: ONCE
CLEAR
MENU
: JULY
: 7 FRI
: 6 : 30 AM
: 7 : 30 AM
41 T V
: SP : SP
: ONCE
ADJUST
MENU
: JULY
: 7 FRI
: 6 : 30 AM
: 7 : 30 AM
41 T V
: AUTO
: ONCE : ONCE
ADJUST
MENU
If the program overlaps another
The overlapped portions will be deleted. The program which
has a lower program number has priority over the
succeeding as illustrated.
8:00
Program 1
Program 2
Program 3
Actual
recorded
Prog.1
portions
To cancel the program
Press MENU and select PROGRAM by pressing the i or
k button. And press j or l to display the program you
want to cancel, then press CLEAR to cancel.
Tips
• If "FULLY PROGRAMMED" flashes and the setting of
PROGRAM 1 appears. 8 programs are already set. Cancel
an unnecessary program.
• To confirm the settings, select PROGRAM in the menu.
Then press j or l to display the settings of each program.
Press MENU to return to the normal screen.
Notes
• When the power supply is interrupted for more than 60
minutes, the preset program is cleared. In this case, you
have to set the timer again.
• The VCR may not work correctly when you use a T-210
tape, even if you select AUTO in step 4.
• When the tape reaches the end during timer recording,
"TIMER" flashes in the display window.
• If you make an irregular setting, "ERROR CODE" flashes on
the TV screen.
9:00 10:00 11:00
Deleted Parts
Prog.2 Prog.3
22
ENGLISH