Aiwa HV-FX9000U Operating Instructions Manual page 15

To connect a CATV system using a CATV converter and 2-way splitter
CATV system
1
2-way splitter
(not supplied)
75-ohm coaxial cable
(not supplied)
2
75-ohm coaxial cable (not supplied)
1
Connect the cable from the CATV system to the 2-way splitter.
2
Connect one of the output connector of the splitter to the input connector
of the CATV converter, and the other to the A/B switch.
3
Connect the output on the converter to the AERIAL connector on this
VCR.
4
Connect the RF OUT connector on this VCR to the A/B switch using the
supplied antenna cable.
5
Connect the A/B switch to the antenna connector on your TV.
6
Connect the AC cord to the AC outlet.
CATV converter
IN OUT
2
6
To AC outlet
AC cord
TV
75-ohm coaxial cable (not supplied)
AERIAL
(VHF/UHF)
RF OUT
To antenna connector
5
75-ohm coaxial cable (not supplied)
3
4
Antenna cable
(supplied)
A/B switch
(not supplied)
Note
When you use a CATV converter,
refer to the Instructions of it.
CONTINUE
ENGLISH
6