Inserting And Changing The Rechargeable Batteries - Sennheiser RS 170 - 08-09 Instruction Manual

Putting the RS 170 into operation
16

Inserting and changing the rechargeable batteries

For powering the headphones, you can use:
• standard batteries (AAA size, 1.5 V)
• NiMH rechargeable batteries (AAA size, 1.2 V, 600 mAh)
If you are using standard batteries, the headphones must
the headphone holder/charger of the transmitter.
»
Remove the ear pads
the direction of the arrow until you overcome a slight resistance.
»
Lift the ear pads off the ear cups.
»
Remove the depeleted rechargeable batteries (where applies).
Insert the rechargeable batteries. Observe correct polarity when
inserting the batteries.
»
Secure the ear pads to the ear cups.
from both ear cups by turning the ear pads in
not be placed on
»