Do you have a question about the ND2 and is the answer not in the manual?
Questions and answers
Andrew Lee
June 5, 2025
The indicator keeps blinking “LC” all of a sudden. Water tank is emptied, fixed properly but problem persists. Product bought over a year.
1 comments:
Mr. Anderson
June 5, 2025
The blinking "LC" indicator on the Novita ND2 means the water tank is not properly attached. To resolve the issue, remove the water tank by holding the grooves at the sides, pull it outwards, then align and reattach it securely to the unit. Ensure it is properly positioned so the “LC” indicator stops illuminating.
Page 1
DEHUMIDIFIER THE 2-IN-1 DEHUMIDIFIER + AIR PURIFIER UP TO 20 MILLION UP TO 20 MILLION NEGATIVE IONS / CM³ NEGATIVE IONS / CM³ UV-C LED SEMI- AUTO PREFERRED LAUNDRY STERILIZATION PERMANENT HUMIDITY HUMIDITY DRYING BUILT-IN IONIZER SENSOR SETTINGS MODE SLEEP TIMER AUTO-SHUT OFF CONTINUOUS...
FEATURES Laundry Drying Mode Besides functioning as portable dehumidifier to safeguard your valuables from moisture and mold, ND2 also doubles up as an effective laundry drying device. DRYING - REMOVING EXCESS MOISTURE Remove excess moisture in the air and maintain ideal humidity conditions to prevent mold and mildew growth.
Humidity Setting Control User can set the humidity level according to individual’s desire within a range of 30% to 80% RH at an interval of 5% RH or Continuous Dehumidification Mode. Selected RH% level will be displayed on the display screen. •...
Air Purification Mode At air purification mode, unit is programmed to operate with anion and UV-C sterilization to purify the air. Keeping airborne allergens and germs at bay to protect you and your loved ones to breathe well and breathe safe •...
Childlock To guard against curious kids, unit is equipped with a childlock function to prevent mishandling/mis-activated by young children who may change the operation unintentionally. To activate childlock function, simply press and hold Timer Button for 2 seconds. Defrost Mode Defrost Mode will be activated automatically with shown on the display screen when room temperature drops to 4...
USING THE NOVITA 2-IN-1 DEHUMIDIFIER Setting Up 01. Remove all packaging materials and place the unit on a dry, stable and level surface. • DO NOT remove the polystyrene from the water tank. 02. From the back of the unit, grasp the upper latch of the 2-In-1 air inlet frame & pre-filter screen and pull it outwards to remove it from the unit.
Page 12
03. Timer At on mode, press the timer button consecutively to select your preferred timer duration from 01 to 24 hours at an interval of 1 hour for automatic shutoff. Its corresponding indicator illuminates on the display screen. • Press the timer button once to view the selected timer duration.
Emptying the Water Tank novita Dehumidifier + Air Purifier The 2-In-1 ND2 shuts off automatically when the water tank is full and unit beeps 5 times with indicator illuminating on the display screen. Follow the simple steps below to empty the water tank.
10L/day. CLEANING & MAINTENANCE Cleaning the novita Dehumidifier + Air Purifier The 2-In-1 ND2 It is important to conduct service maintenance of the unit at least once a week to ensure unit optimum performance and to prevent dust/dirt built up at the continuous drainage outlet port and water float sensor, which may lead to water leakage.
• Remove water tank and re-assemble it into the unit again. • Power plug or cord damaged. • Contact novita Customer Care Centre. Fan not working. • The desired RH% setting is achieved. • Set the desired RH% lower than the surrounding humidity level.
Page 16
• Move unit to a level and stable surface. Excessive noise. • Loose or foreign particles inside the unit. • Contact novita Customer Care Centre. • Sound of flowing water. • This is normal. • 2-in-1 air inlet frame & pre-filter screen •...
Page 17
• Press and hold timer button for 2 is activated. seconds to deactivate the childlock. show E1 error message • Temperature sensor error. • Contact novita Customer Care Centre. illuminates on the display screen. E2 error message • Humidity sensor error. • Contact novita Customer Care Centre.
SAFETY PRECAUTIONS DO NOT pull or tug the unit Keep the unit away from Refrain from placing the by the power cord to prevent flammable liquids. dehumidifier in confined safety hazards or damage closets. to the unit. DO NOT insert any For maximum efficiency, ensure Servicing should only be foreign objects into any...
SAFETY INSTRUCTIONS Read the operating instructions carefully before using the unit & keep it for later reference. Persons who are not familiar with the operating instructions, as well as children & persons under the influence of medication, alcohol or drugs are not advised to operate the unit, or are only advised to operate it under supervision.
Service Trekking* With everyone’s busy schedule, it’s sometimes hard to keep track of everything. Sit back, relax and leave the fussing to us. Instead of calling and checking up on the status of your product, let novita keeps you updated.
Product for any repair work to novita and for the subsequent collection. Any Product to be repaired must be sent to the service centre directly. No outdoor servicing will be provided. novita can provide collection and return service and a transportation fee of S$40 is applicable.
PuriDry™ Dehumidifier + Air Purifier 2-In-1 ND2 NEXT 12 MONTHS STANDARD EXTENDED S$65 /Unit LIMITED WARRANTY T & C Updates Commission/Effective from 08 Dec 2023 • All Information is accurate at the point of print. novita reserves all rights to update the information without prior notice.
Need help?
Do you have a question about the ND2 and is the answer not in the manual?
Questions and answers
The indicator keeps blinking “LC” all of a sudden. Water tank is emptied, fixed properly but problem persists. Product bought over a year.
The blinking "LC" indicator on the Novita ND2 means the water tank is not properly attached. To resolve the issue, remove the water tank by holding the grooves at the sides, pull it outwards, then align and reattach it securely to the unit. Ensure it is properly positioned so the “LC” indicator stops illuminating.
This answer is automatically generated
The F4 display appears and not working.