Advertisement
Table of Contents
Technical Support and E-Warranty Certificate
www.vevor.com/support
FISHING CART
MODEL: YK-400
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Related Manuals for VEVOR YK-400
Summary of Contents for VEVOR YK-400
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support FISHING CART MODEL: YK-400 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-
Page 3: Safety Instructions
3. It is forbidden to load articles on uneven and hilly terrains. 4. Overload is strictly prohibited. 5. Don't move too fast when passing pothole areas. MODEL AND PARAMETERS Model YK-400 Max. Load 350lbs Wheels 18inch(After Inflated size), inflatable, PU wheels*2... -
Page 4: Installation
INSTALLATION Frame Part x1(Each for one) Connection Block x12 wheels x2 Washer x2 Axle x2 O-pin x2 Axle Spacer x2 Fishing Rod Barrel x1 Fishing Rod Barrel x7 Knob Screw x 1 (With nut) 4mm Hex Wrench x2 3mm Hex Wrench x1 Wrench x1 - 3 -... - Page 5 M6x50 Bolts x3 M5x35 Bolts x14 M5x16 Bolts x19 (Need two, one more) (Need thirteen, one more) (Need eighteen, one more) M5x60 Bolts x2 M6x25 Bolts x3 Wheel jig cardboard x1 (Need one, one more) (Need two, one more) User Manual x1 Hand Pump x1 Step 1: Connect the two lower frames together using the M5x35 bolts and the connection block.
- Page 6 Step 2: Attach the upper frame in the same manner. M5x35 Step 3: Mounting the frame. NOTE: The frames have pre-drilled holes for mounting the fishing barrels. The number of pre-drilled holes on the upper and lower frames on the same side should be the same. Pay attention to the location of the fishing rod barrel.
- Page 7 M5x16 M5x16 NOTE: M6X60 is required for the bottom bolt of the fishing rod barrel where the fish food bucket is placed. M5x16 Knob Screw M5x60 Tip: There is only one bucket with a nut, the upper end uses a Knob Screw and the lower end uses an M5X60 bolt, all other buckets are mounted with an M5X16 bolt.
- Page 8 Step 4: Install all rod barrels, then fix the handrail and the wheels. NOTE: Please inflate the wheels before installation. - 7 -...
- Page 9 M5x35 O-pin mounting hole NOTE: Insert the plastic parts of the wheel axle into the ends of the bottom cross member of the frame, then insert the wheel axle, and finally install the wheel on it. Step 5: Put in the washer first, then insert the O-pin. - 8 -...
-
Page 10: Maintenance
MAINTENANCE 1. Clean the surface after each use. 2. Please check and confirm that the cart is intact and the tire pressure is normal before each use. 3. Check that the bolts are tight. Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia... - Page 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the YK-400 and is the answer not in the manual?
Questions and answers