Operation Of The Appliance - Fakir INOVATOR X Manual

CAUTION!
• If the rotating brush is blocked while using turbo floor nozzle no. 5 (e.g. due to the
suction of big foreign materials, shagpile carpets and the fibers and the hair on the
carpets),
• turn the vacuum cleaner off with button no. 1.
• Then, remove the reason of the blockage and clean the rotating brush if required (see
Section V. MAINTENANCE).

Operation of the Appliance

1. Turning the vacuum cleaner on/off
You may turn the vacuum cleaner on/off with button no. 1.
2. Vacuum power setting
There are three vacuum power levels (high / red light – medium / blue light – low / green
light) . Vacuum power level is set by the button no. 2. Pressing and holding the button for
2 seconds switches to auto vacuum level. Auto vacuum level reduces and increases the
power automatically as per the surface and the vacuumed dust amount and provides an
optimal operation.
NOTE:
When the vacuum cleaner is turned on, it is initially set to low vacuum power.
35