Using The Mx W1; Switching The Earphones On/Off - Sennheiser MX W1 - 06-08 Instruction Manual

Using the MX W1

To switch the system on, proceed as follows:
1. Switch your audio device on.
2. Switch the earphones on (see following chapter).
3. Switch the transmitter on (see page 15).
4. Put the earphones on (see page 16).
You will hear the sound from your sound source.

Switching the earphones on/off

To switch the earphones
Press and hold the operation/pairing button
LEDs light up blue.
0
The earphones switch off.
14
To switch the
Remove the earphones from the docking
station
or:
Press
operation/pairing button
»
LEDs flash blue.
0
The earphones switch on.
off:
4s
earphones on:
and hold the
4s
earphones'
until the
until the