Connecting An Additional Audio Player - Sennheiser HMEC 250 - 05-10 Instruction Manual

Table of Contents

Advertisement

10

Connecting an additional audio player

The 3.5 mm jack socket
additional audio player (e.g. MP3 player).
DANGER!
Danger of accident due to reduced
attention!
Listening to music or operating an audio
player limits your attention and may cause
accidents.
Hearing damage due to high volumes!
This headset is capable of producing high
sound pressure levels. Higher volumes or
longer durations can damage your hearing!
Connect the audio cable to the 3.5 mm jack socket
on the operating control and to the corresponding jack
socket on your audio player.
Switch NoiseGard on (see "Switching NoiseGard on/off"
on page 15).
Audio from the additional audio source and from the
intercom are heard simultaneously through the headset.
Operate the connected audio player as usual and observe
the manufacturers instructions.
allows you to connect an
During flight operation, do not use the
headset for listening to additional audio
sources!
Set the volume to a medium level. Make
sure
that
you
environmental sounds and warning
alarms!
can
hear
critical

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hmec 250

Table of Contents