Chef cooking CFE547WBB User Manual page 14

Gas conversion instructions
Gas Regulator Conversion
Chant Regulator
1. Unscrew the top hat nut from the regulator. The top hat
nut and control pressure spring assembly will disengage
as an assembly. See figures A&B.
2. Unscrew the threaded pin from top hat. See figures
C&D.
3. Turn over threaded pin, so spring is free and screw pin
back into the top hat until firm. See figures E&F.
4. Screw the top hat nut assembly back into the regulator
ensuring that it is fully screwed down. See figures G&H.
The regulator is now set for connection to LPG.
Top hat nut assembly,
fully screwed down
Configuration for
Natural Gas
14 Chef 540 Upright Cooker
Turn top hat nut
anti-clockwise
and remove
Configuration for LPG
Dong Yang Regulator
1. Unscrew the hex nut from the regulator. The hex nut,
brass washer and nylon insert will disengage as an
assembly. See Fig. 1.
2. Unclip the nylon insert from the nut assembly by rotating
the insert ¼ turn, and pulling it free. See Fig. 2.
3. Turn over the insert, and clip back into position. See
Fig. 3&4.
4. Screw the hex nut assembly back into the regulator
ensuring that it is fully screwed down. The regulator is
now set for connection to LPG.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Hex nut assembly,
fully screwed down
Hex nut assembly,
removed from regulator
and insert disassembled
Insert oriented for Natural
Gas operation
Insert oriented for LPG
operation