Overview Of The Operating Menus - Sennheiser EW 300 IEM G3 Instruction Manual

Using the operating menus

Overview of the operating menus

For more detailed information on the operating menus, refer to the instruction manuals of the transmitter and
the diversity receiver which can be downloaded from www.sennheiser.com.
SR 300 IEM G3 transmitter
Extended menu
Main menu
"Advanced Menu"
"Menu"
Tune
Sensitivity
Sync Settings
Easy Setup
RF Power
Mode
Warnings
Frequency Preset
LCD Contrast
Name
Reset
Equalizer
IP-Address
AutoLock
Software Revision
Advanced
Exit
Exit
Operating menu of the SR 300 IEM G3 transmitter
When the standard display is shown on the display panel, you can get into the main menu by pressing the jog dial.
The extended menu "Advanced
Display Function of the menu item
Main menu "Menu"
Sensitivity Adjusts the input sensitivity (0 to –42 dB, adjustable in steps of 3 dB)
Easy Setup Deactivates the RF signal and activates Easy Setup Sync (see page 27)
Mode Selects mono or stereo operation (see page 19)
Frequency Preset Changes the frequency bank and the channel
Name Enters the transmitter name
Equalizer Changes the frequency response of the output signal using a graphic equalizer
(+/– 12 dB, adjustable in steps of 2.4 dB)
AutoLock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu
Exit Exits the operating menu and returns to the standard display
Extended menu "Advanced
Tune Sets the transmission frequencies for the frequency banks "U1" to "U6"
Special function: Sets a channel and a transmission frequency for the frequency banks "U1"
to "U6":
Sync Settings Adjusts the receiver parameters and activates/deactivates their transfer to the EK 300 IEM G3
receiver. For an overview of the parameters, refer to page 20.
RF Power Adjusts the transmission power ("Low" or "Standard")
24
"Sync Settings"
Balance
Squelch
Mode
High Boost
Auto Lock
Limiter
Exit
"Warnings"
AF Peak
RF Mute
Exit
Menu" and the other menus can be accessed via the corresponding menu items.
"Advanced
Menu"
Select this menu item and call it up by pressing the jog dial
appears.
EK 300 IEM G3 receiver
Main menu
"Menu"
Squelch
Easy Setup
Frequency Preset
Name
Balance
Mode
High Boost
Auto Lock
Advanced
Exit
Menu"
"Easy Setup"
Reset List
Current List
Scan New List
Extended menu
"Advanced Menu"
Tune
Pilot Tone
Limiter
LCD Contrast
Reset
Software Revision
Exit
until the channel selection