Assembly And Mounting, Assembly Instructions - Sennheiser EM 3031-U Instructions For Use Manual

5 Assembly and mounting
Use as a stand-alone receiver
For use as a stand-alone receiver, it is recommended that the supplied telescopic antennæ are used.
They can be mounted quickly and easily to the rear of the receiver and are suitable for all applications
where – good reception conditions provided – a wireless transmission system is to be used without
a large amount of installation work.
To ensure that the receiver is securely mounted
on a surface on which it can not slip, four self-
adhesive soft rubber feet are supplied. These feet
are stuck into the recesses on the lower side of
the receiver.
Ensure that the recesses are clean and free from
grease before mounting the feet.
N.B.
Do not use these feet if rack-mounting
the receiver.
34