This proof is submitted for your approval to style, typography, etc., but not for grade or color of paper or ink. Please read carefully and indicate any errors found.
WE ARE NOT RESPONSIBLE FOR ANY ERRORS NOT INDICATED AT THIS TIME. ANY ALTERATIONS FROM THE ORIGINAL COPY OR LAYOUT WILL BE CHARGED EXTRA ACCORDING
TO THE TIME AND MATERIALS INVOLVED IN MAKING NECESSARY CHANGES.
* Customer Only use
(Replacement files can result in additional errors when new files are processed. GRUPO BACA,
Printing is not responsible for errors caused by these changes)
63,1092
327,324
L.Y :
C.P:
N/A
Magnetic Cylinder:
Date Formation:
Notes:
"GRUPO INDUSTRIAL BACA, S.A. DE C.V." AV. RETORNO DEL AGUILA CORONADA NO. 19090-1 FRACC. INDUSTRIAL BAJA MAQ. EL AGUILA, TIJUANA B.C. CP 22575
Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver Zeus2 Glass Helm Installation Manual F-278 REV A 988-10703-002.Rev 1...
Page 5
Broadband Sonar are trademarks of Navico, registered in the US and other countries About this manual This manual is a reference guide for installing the B&G Zeus2 Glass Helm system. The manual does not cover basic background information about how equipment such as radars, echosounders and AIS work.
AIS Class B “CS” Static Data Report, Part B 130074 Route and WP Service - WP List - WP Name & Position 130306 Wind Data 130310 Environmental Parameters 46 | Supported data | Zeus2 Glass Helm Installation Manual F-278 REV A 988-10703-002.Rev 1...
Page 12
Importing a database Later, if the Zeus2 Glass Helm has been restored to factory defaults or user data is accidentally deleted, simply return to the files page, highlight the backed up file, and select ‘Import’ . View file details for creation date.
Page 13
Software upgrade of other networked devices Most NMEA 2000 and ethernet devices can be upgraded from the Zeus2 Glass Helm. when unit is already turned on: open the ‘Files’ page select the updater on inserted ‘Memory card’...
The Zeus2 Glass Helm may be used to apply software updates to itself, and to supported NMEA 2000 and ethernet devices.
Page 15
Shows a list of all visible networks available for connection. Select name of desired network to enter network key and make connection. Change administrator password (Access Point mode, WIFI-1 only) | 41 Software setup | Zeus2 Glass Helm Installation Manual F-278 REV A 988-10703-002.Rev 1...
Frente_8 The Zeus2 Glass Helm monitor to which connection is attempted will raise a prompt. Select ‘Yes’ for one-time connection with control, or ‘Always’ if device is to be remembered for regular connection and control. If ‘No’ is selected, tablet can still be used to view only. This setting can be changed later if required.
B&G technical support. Wireless setup The Zeus2 Glass Helm can be veiwed and controlled via an Android or Apple tablet, using a WIFI-1 module and the GoFree application. Phones can also use the app to view, but don’t allow control.
No special setup is required for establishing an ethernet network, it is all ‘plug and play’ . An NEP-2 connected between an Zeus2 Glass Helm and another network module (e.g. BSM-1) will automatically start working, and relay data between the two devices.
CZone menu on the Settings page. When the config is already available on the network, it will immediately commence uploading to the Zeus2 Glass Helm once the dipswitch is set. Allow this to complete, without interruption. Setting CZone to display at startup With this option selected, the CZone control page will be shown first, every time the Zeus2 Glass Helm is powered up.
CZone Configuration Tool, a specialised PC application available from BEP Marine Ltd, and associated CZone distributors. The Zeus2 Glass Helm system provides a means to load the Config file, as well as apply updates to module firmware, removing the need to take a laptop computer aboard the vessel.
Calibration may be required to accurately match measured flow with actual fuel flow. Access calibration from the ‘Refuel’ dialog. Calibration is only possible on Navico’s Fuel Flow sensor. | 35 Software setup | Zeus2 Glass Helm Installation Manual F-278 REV A 988-10703-002.Rev 1...
The scrollable left column of icons access most settings that require configuration; First time startup When the Zeus2 Glass Helm is started for the first time, or after a factory default, the unit will raise prompts requesting the user to select some fundamental setup options;...
Page 23
The best way of checking the value of the Counter rudder setting is when making turns. The figures illustrate the effects of various Counter Rudder settings; | 33 Software setup | Zeus2 Glass Helm Installation Manual F-278 REV A 988-10703-002.Rev 1...
Select ‘Display Assignment’ seperately on both displays connected. ¼ Note: This feature is dependant on both the Zeus2 Glass Helm and the ZM series monitor be- ing connected to a NMEA 2000 network. USB switching By default, one USB port is assigned to each display.
Calibration must be made on the compass that is active for the autopilot. If the com- pass is not possible to initiate calibration from the device list on the Zeus2 Glass Helm, refer to the compass’ own instructions regarding calibration.
The device list shows the physical and virtual devices that provide data. This may include a module inside the Zeus2 Glass Helm, the NMEA 0183 port, or any external NMEA 2000 device. Stand CLEAR of the wheel and do not attempt to take manual control of the wheel dur-...
AP control, or from other pilot control heads. The following sections describe how you configure the autopilot from the Zeus2 Glass Helm. If you connect the Zeus2 Glass Helm to an already commissioned autopilot system, you only have to do an automatic source selection as described above before the autopilot is ready to be used.
Autopilot setup Radar source The Zeus2 Glass Helm supports control of Navico autopilot computers, In a system with more than one radar, the correct device to configure can be selected from including the AC12N, AC42N, SG05, NAC-2, NAC-3, and H5000. These this menu.
Page 29
Reverso_14 plies where a network combines Zues Touch with Zeus2 Glass Helm. Adjust range offset (pulse radar only) The timing of the transmit and receive circuits can be adjusted to determine zero range. Position the vessel stationary about 150-200 m from a straight jetty or sea wall. Set the radar to 1/8 nm.
Need help?
Do you have a question about the Zeus2 Glass Helm and is the answer not in the manual?
Questions and answers