Burstner Elegance 2019 Instruction Manual
  1. Manuals
  2. Brands
  3. Burstner Manuals
  4. Motorhomes
  5. Elegance 2019
  6. Instruction manual
Burstner Elegance 2019 Instruction Manual

Burstner Elegance 2019 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction manual
Instruction m anual
Dear Reader ...
We would like to congratulate you on the purchase of your new Bürstner motorhome. You have selected a
top-quality vehicle which will afford you many years of enjoyment.
To enable you to always use and operate your motorhome properly and easily, your Bürstner dealer will first
provide you detailed instructions for all important functions when you take delivery.
This manual, the instruction manuals from the base vehicle manufacturer as well as the instruction manuals
from the appliance manufacturer will always be at hand to answer any questions you may have regarding
your motorhome.
Before your first journey
Please familiarise yourself with this manual rather than relying on it strictly for reference.
Fill in the warranty cards for the appliances and special equipment in the individual instructions and send
these cards to the respective manufacturers. This ensures your warranty claim for each appliance.
© 2019 Bürstner GmbH & Co. KG Kehl
1
Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 - EHG-0018-01EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elegance 2019 and is the answer not in the manual?

Questions and answers

Related Manuals for Burstner Elegance 2019

Summary of Contents for Burstner Elegance 2019

  • Page 1 Instruction manual Instruction m anual Dear Reader ... We would like to congratulate you on the purchase of your new Bürstner motorhome. You have selected a top-quality vehicle which will afford you many years of enjoyment. To enable you to always use and operate your motorhome properly and easily, your Bürstner dealer will first provide you detailed instructions for all important functions when you take delivery.
  • Page 2 Instruction manual Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 3: Table Of Contents

    Contents Cont ents Seat belts ............47 Introduction........9 5.5.1 General .............. 47 General .............. 10 5.5.2 Fastening the seat belts correctly ..47 Environmental tips ........10 Child restraint systems ....... 48 ISOFIX child safety seat mounting Weatherproof guarantee ... 13 system (special equipment) ......
  • Page 4 Contents Living ..........73 7.11 Skylights ............97 7.11.1 Heki skylight ............. 98 Central locking system 7.11.2 Skylight with snap latch ......100 (special equipment) ........73 7.11.3 Wind-up skylight Conversion door and driver's door ..74 (partially special equipment) ....101 7.2.1 Driver's door, outside ........
  • Page 5 Contents Electrical system ......133 9.14.3 Connection diagram, panel (LT 96) ..165 9.14.4 Connection diagram, panel General safety instructions .....133 (LT 633) ............166 Terms ...............133 9.14.5 Circuit diagram, exterior ......167 USB socket (partially special equipment) ....134 Appliances ........169 12 V power supply ........135 10.1 General ............
  • Page 6 Contents 11.5 Toilet ..............219 13.7.4 Rear lights (Ixeo I) ........245 11.5.1 Preparing toilet ..........220 13.7.5 Side lights ............246 11.5.2 Swivel toilet ........... 222 13.7.6 Types of bulbs for exterior lighting ..246 11.5.3 Emptying the sewage tank ..... 223 13.8 Replacing bulbs, internal ......
  • Page 7 Contents Helpful notes ....... 283 18.5 Tips on staying overnight safely during travel ........285 18.1 Traffic rules in foreign countries ....283 18.6 Tips for winter campers ......285 18.2 Help on Europe's roads ......283 18.7 Travel checklists .......... 286 18.3 Gas supply in European countries..284 18.4...
  • Page 8 Contents Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 9: Introduction

    Introduction Introd ucti on Please read this instruction manual completely before using the vehicle for the first time! Always keep this instruction manual in the vehicle. Also inform all other us- ers of the safety regulations.  The non-observance of this symbol can lead to personal injury. ...

  • Page 10: General

    Introduction General The vehicle is constructed in accordance with the latest technology and the recognised safety regulations. Nevertheless, personal injury may result and the vehicle may be damaged if the safety instructions in this instruction manual are not followed. Before using the vehicle for the first time, equip it with the legally prescribed equipment (e.g.
  • Page 11 Introduction  When parked, do not allow the engine to run more than necessary. When running idle, a cold engine releases more contaminants than usual. The running temperature of the engine is achieved more quickly whilst the vehicle is in motion. ...
  • Page 12 Introduction Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 13: Weatherproof Guarantee

    Weatherproof guarantee Weatherproof guarant ee Bürstner Warranty Conditions 1. BÜRSTNER GmbH & Co. KG, Weststraße 33, 77694 Kehl (Guarantor) grants a 10-year water ingress warranty on vehicles manufactured from model year 2019 onwards, up to a maximum mileage of 120,000 km and that the following components of the caravan or motorhome are sealed in such a way that there is no ingress of moisture from the out- side to the inside (interior) during normal, contractual and non-commer-...
  • Page 14 Weatherproof guarantee 3. Depending on which occurs earlier, the warranty period begins either on the date of first registration or on the handover of the vehicle to the original purchaser, but no later than one year after the first delivery of the vehicle to the dealer.

  • Page 15: Proof Of Water Ingress Tests

    Weatherproof guarantee ⚫ Damage due to incorrect use of care products or cleaning agents (see “Care” instructions in the instruction manual.) ⚫ Damage due to non-compliance with the instruction manual or the manufacturer’s repair and maintenance instructions. ⚫ All other damages that are not the responsibility of the guarantor or an authorised workshop of the guarantor.

  • Page 16: Water Ingress Test (Certificates)

    Weatherproof guarantee 2.2.2 Water ingress test (certificates) 12 months _________________ 24 months _________________ Stamp of the Bürstner dealer Stamp of the Bürstner dealer Date Signature Date Signature 36 months _________________ 48 months _________________ Stamp of the Bürstner dealer Stamp of the Bürstner dealer Date Signature Date...

  • Page 17: Safety

    Safety Safety Chapter overview This chapter contains important safety instructions. The safety instructions are for the protection of persons and property. Fire prevention 3.1.1 Avoidance of fire risks  Never leave children in the vehicle unattended.  Keep flammable materials clear of heating and cooking appliances. ...

  • Page 18: General

    Safety General  The oxygen in the vehicle interior is used up by breathing and the use of gas operated appliances. That is why the used air must be replaced permanently. For this purpose, forced ventilation options (e.g. sky- lights with forced ventilation, mushroom-shaped vents or floor vents) are fitted to the vehicle.

  • Page 19: Road Safety

    Safety Road safety  Before commencing the journey, carry out a functional check of indi- cating and lighting equipment, the steering and the brakes.  If the vehicle has been stationary for a long period (approx. 10 months) have the braking and gas systems checked by an author- ised specialist workshop.

  • Page 20: Towing

    Safety  Check tyre pressure before a journey or every 2 weeks. Wrong tyre pressure causes excessive wear and can lead to damage or even to tyre burst. You can lose control of the vehicle (see section 14.6).  Do not operate the heater at petrol stations. Danger of explosion! ...

  • Page 21: Gas System

    Safety Gas system 3.5.1 General instructions  The operator of the gas system is responsible for the performance of recurring inspections and for complying with the maintenance inter- vals.  Before commencing the journey, when leaving the vehicle or when gas equipment is not in use, close all gas isolator taps and the main regula- tor tap on the gas bottle.

  • Page 22: Gas Bottles

    Safety  The built-in gas devices are exclusively meant for use with propane or butane gas or a mixture of both. The gas pressure regulator as well as all built-in gas devices are designed for a gas pressure of 30 mbar. ...

  • Page 23: Electrical System

    Safety  Use only 11 kg or 5 kg gas bottles. Camping gas bottles with built-in check valve (blue bottle with max. 2.5 or 3 kg content) are can be used in exceptional cases with a safety valve.  Use the shortest possible tube lengths (150 cm max.) for external gas bottles.
  • Page 24 Safety Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 25: Before The Journey

    Before the journey Before the journey Chapter overview This chapter contains important information which has to be noted before commencing your journey or carrying out any tasks before the journey. At the end of the chapter there is a checklist which once again summarises the most important points.

  • Page 26: Terms

    Before the journey On loading, make sure that the payload's centre of gravity is as low as possi- ble (directly above the floor of the vehicle). Otherwise this may affect the driving characteristics of the vehicle. Description Load (kg) Maximum permitted pay- Pull-down bed loads Roof load...
  • Page 27 Before the journey Basic equipment includes all equipment and fluids required for safe and proper vehicle use. The weight of the basic equipment includes: ⚫ A full fresh water system ⚫ A gas bottle filled up to 90 % ⚫ A full heating system ⚫...

  • Page 28: Calculating The Payload

    Before the journey Chapter 16 lists the weights of the various items of special equipment; they may also be obtained from the manufacturer. Personal equipment Personal equipment includes all items in the vehicle that are not included in the conventional load or in the additional equipment. For example, personal equipment can include the following: ⚫...

  • Page 29: Loading The Vehicle Correctly

    Before the journey Mass in kg to be cal- Calculation culated Example for calculating Maximum permissible gross weight ac- 3500 the payload cording to vehicle documents Actual weight including basic equipment - 3070 according to vehicle documents This results in a permissible payload of The calculation of the payload from the difference between the maximum permissible gross weight in laden condition and the actual weight specified by the manufacturer is however only a theoretical value.
  • Page 30 Before the journey  Store heavy objects (awning, tin cans, etc.) close to the axles. Low-ly- ing storage spaces whose doors do not open in the direction of travel are particularly suited for storing heavy objects.  Stack light objects (laundry) in the roof storage cabinets. ...

  • Page 31: Rear Garage/Rear Storage Space

    Before the journey Example 1 Example 2 Example calculation Distance to the front axle (A1) 450 (cm) (A2) 250 (cm) Weight in the storage space x 100 (kg) x 50 (kg) Wheelbase of the vehicle ÷ 325 (cm) ÷ 325 (cm) Load on the rear axle 138.5 (kg) 38.5 (kg)

  • Page 32: Bike Rack (Special Equipment)

    Before the journey 4.3.5 Bike rack (special equipment)  Observe the permissible axle loads and maximum permissible gross weight when loading the bike rack.  A total width of 2.55 m must not be exceeded. Adjust the attach- ments for the bikes accordingly. The overhang to the side and rear must be marked in accordance with the regulations for the country in which you are travelling.
  • Page 33 Before the journey Bike rack, not lowerable  Also read the manufacturer's instruction manual. Fig. 1 Bike rack, not lowerable Depending on the model, the bike rack can be used to transport 2 or 3 bicy- cles comfortably. ◼ Loading the bicycles: Fold the swivel clip down.

  • Page 34: Bike/E-Bike Bike Rack (Special Equipment)

    Before the journey 4.3.6 Bike/e-bike bike rack (special equipment)  Observe the permissible axle loads and maximum permissible gross weight when loading the bike rack.  A total width of 2.55 m must not be exceeded. Adjust the attach- ments for the bikes accordingly. The overhang to the side and rear must be marked in accordance with the regulations for the country in which you are travelling.

  • Page 35: Load Rack (Special Equipment)

    Before the journey Fig. 4 E-bike bike rack Fig. 5 Positioning of e-bikes ◼ Loosen the strap and fold the e-bike bike rack (Fig. 4,2) down. ◼ Lift the first e-bike onto the bike rack and place it on the wheel-holders (with the front wheel pointing left).
  • Page 36 Before the journey  An entry must be made in the vehicle documents in order to attach a load rack. The required documents are enclosed with the load rack.  Have your dealer or service centre install the load rack. ...

  • Page 37: Towing

    Before the journey Towing  Care is to be taken when connecting and detaching a trailer. Risk of accident and injury!  No persons are to be between the towing vehicle and the trailer dur- ing positioning for connecting and detaching. ...

  • Page 38: Entrance Step (Partially Special Equipment)

    Before the journey Fig. 8 Caravan coupling, rigid Have your dealer or service centre install the add-on parts. They will also Entry in the vehicle documents take care of all the formalities for you. Entrance step (partially special equipment)  Before commencing the journey and after short interruptions of the journey, ensure that the entrance step is completely retracted.

  • Page 39: Tv Unit (Special Equipment)

    Before the journey Fig. 11 Indicator lamp When the ignition is switched on and the entrance step is extended, an indi- cator lamp (Fig. 11,1) is illuminated on the dashboard. ◼ Emergency operation: Make sure that the vehicle is parked such that it has a firm stand ◼...

  • Page 40: Securing Add-On Parts

    Before the journey Securing add-on parts  In the event of an accident or emergency braking, loose add-on parts could injure the occupants of the vehicle. Before setting off, secure loose add-on parts in the holders provided or stow them in a secure place inside the vehicle.

  • Page 41: Gas Regulator

    Before the journey Gas regulator  Operating gas-operated appliances during the journey is permitted only if the gas system has the relevant equipment. The hose break guard and crash protection unit (CPU) prevent the gas form escaping in the event of an accident. Depending on the equipment, different gas regulators can be installed in the vehicle.

  • Page 42: Snow Chains (Special Equipment)

    Before the journey 4.10 Snow chains (special equipment)  Only mount snow chains if there is a clearance of at least 50 mm be- tween the tyres and the vehicle body.  When using snow chains, the tyres, wheel suspension and steering are subjected to an additional load.
  • Page 43 Before the journey Checks Checked Housing body, outside Awning completely retracted Roof free of snow and ice (in winter) External connections and lines disconnected and stored away External supports removed Fitted steady legs retracted and fixed in place Wheel chocks removed and stored away External flaps closed and locked Rear conversion door closed Overall height of the vehicle including roof rack when loaded...
  • Page 44 Before the journey Checks Checked Electrical system Check the battery voltage of the starter and living area battery (see chapter 9). If the panel indicates that the battery voltage is too low, the respective battery will need to be recharged. Observe the notes and instructions in chapter 9 ...

  • Page 45: During The Journey

    During the journey During t he jour ney Chapter overview This chapter contains instructions on how to drive the vehicle. Driving  The base vehicle is a commercial vehicle (small truck). Adjust your driving technique accordingly.  Before commencing the journey and after short interruptions of the journey, ensure that the entrance step is completely retracted.

  • Page 46: Reversing Camera (Special Equipment)

    During the journey Reversing camera (special equipment) Fig. 17 Reversing camera with infra- red LEDs A reversing camera (Fig. 17) is installed in the vehicle. When it is dark, the infrared LEDs of the reversing camera illuminate the field of view. If the central multimedia/navigation system has been switched on and re- verse is engaged, the reversing camera's image is automatically displayed on the LCD monitor.

  • Page 47: Brakes

    During the journey Brakes  Have defects on the braking system immediately remedied by an au- thorised specialist workshop. Before each journey Before each journey, check by means of a braking test: ⚫ Do the brakes function? ⚫ Do the brakes react evenly? ⚫...

  • Page 48: Child Restraint Systems

    During the journey Child restraint systems  When travelling, secure children under 13 years of age that are smaller than 150 cm, with a suitable and officially approved child re- straint system.  Only attach the child restraint system to seats that are specified for this purpose.
  • Page 49 During the journey Fig. 19 Child seats on bench Fig. 20 Child seats on L-shaped bench Child restraint systems in The arrow in Fig. 19 and Fig. 20 shows the direction of travel. the living area On the L-shaped bench, the back cushion on the side wall must be removed when a child seat is fitted.

  • Page 50: Isofix Child Safety Seat Mounting System (Special Equipment)

    During the journey ISOFIX child safety seat mounting system (special equip- ment) Fig. 21 ISOFIX child safety seat mounting system If the vehicle is equipped with the ISOFIX child safety seat mounting system, the vehicle seats suitable for it are marked with the ISOFIX symbol. These vehicle seats have retaining brackets (Fig.

  • Page 51: Seats (Aguti-Liner) (Partially Special Equipment)

    During the journey 5.8.1 Seats (Aguti-Liner) (partially special equipment) Fig. 22 Release lever for rotating Fig. 23 Seat adjustment Rotating the seat The seats can be rotated in any direction. The seats can only be locked in position in the direction of travel. ◼...

  • Page 52: Seat Heater (Special Equipment)

    During the journey 5.8.2 Seat heater (special equipment)  The seat heater only works when the ignition is switched on. Depending on the equipment level, the driver's and front passenger's seats are equipped with seat heaters which can be continuously adjusted. Fig.

  • Page 53: Additional Seat With Folding Table (Dependent On Model) (Special Equipment)

    During the journey Additional seat with folding table (dependent on model) (special equipment) Depending on the equipment, the divan can be converted into an additional seat. This seat is equipped with a seat belt and can be used during the jour- ney.

  • Page 54: Additional Seat Secured By Belts (Partially Special Equipment)

    During the journey 5.10 Additional seat secured by belts (partially special equip- ment) Depending on the model and the ground plan, the vehicle can be equipped with an additional sear secured by belt. This seat is fitted in the opposite di- rection to travel on the chest frame behind the front passenger's seat.

  • Page 55: Headrests

    During the journey 5.11 Headrests Fig. 35 Bench headrest Before commencing the journey, adjust the headrests (Fig. 35,1) so that the back of the head is supported at approximately ear height. Push the headrests upwards or downwards by hand. 5.12 Seating arrangement ...

  • Page 56: Electrical Window Winder

    During the journey It is recommended, though, to close the branch block during the journey and, thus, disconnect the heating circuits from each other. In this way, the full power of the heater of the base vehicle is available for the panes in the driv- er's cabin.

  • Page 57: External Mirrors, Electrically Adjustable (Partially Special Equipment)

    During the journey 5.15 External mirrors, electrically adjustable (partially special equipment) Fig. 39 External mirrors Fig. 40 Rotary switch for external mirror adjustment The vehicle is equipped with two electrically adjustable and heated external mirrors (Fig. 39,1). Depending on the model, the external mirrors will be one- part mirrors or be additionally equipped with a wide-angle mirror.

  • Page 58: Shades For Windscreen, Driver's Window And Front Passenger's Window

    During the journey 5.16 Shades for windscreen, driver's window and front passen- ger's window  During the journey, the shades for the windscreen, driver's window and front passenger's window must be open, in a fixed position and secured. The driver's view must not be obstructed. 5.16.1 Manually adjustable Roman shades (partially special equip- ment)

  • Page 59: Electrically Adjustable Roman Shade (Special Equipment)

    During the journey 5.16.2 Electrically adjustable Roman shade (special equipment) Fig. 45 Switch (electric operation of the Roman shade) ◼ Opening and closing: Press switch on the dashboard (Fig. 45,1). Emergency operation In the event of a power failure, the Roman shade can be moved manually by a crank.

  • Page 60: Bonnet

    During the journey ◼ If both holding bars have moved out of the visible range: pull securing button (Fig. 47,5) out again. ◼ Switch power supply on. A referencing run of the holding bars takes place. The regular electrical operation is now possible again. ...

  • Page 61: Washer Nozzles

    During the journey ◼ Opening (Lyseo Time I): Pull the lever (Fig. 48,1) on the left under the dashboard or next to it. ◼ Swivel bonnet downwards. ◼ Closing (Lyseo Time I): Move the bonnet upwards until the catch lock engages audibly. ◼...

  • Page 62: Filling Up With Diesel

    During the journey ◼ Twist the flexible hose in a way so that the filling hole points upwards (Fig. 53). ◼ Slowly fill in washer fluid. ◼ Push the lid onto the filler neck of the washer fluid container. ◼ Push the flexible hose back into the holder and lock it into place.

  • Page 63: Topping Up Adblue

    During the journey ® 5.21 Topping up AdBlue  Store AdBlue ® ® out of the reach of children. Do not store any AdBlue containers in the vehicle.  ® If the AdBlue tank is empty, you cannot start the vehicle. If you have ®...

  • Page 64: Towing

    During the journey  ® Do not dispose of the AdBlue containers in the domestic waste. Dispose of the empty containers in accordance with the national directives or re- turn them to the point of sale.  Further information can be found in the instruction manual of the base vehicle.

  • Page 65: Setting Up The Vehicle

    Setting up the vehicle Setting up t he v ehicle Chapter overview This chapter contains instructions on how to pitch the vehicle at the campsite.  Pitch the vehicle so that it is as horizontal as possible. Use ramps where necessary.

  • Page 66: Steady Legs (Special Equipment)

    Setting up the vehicle  Always apply the handbrake before extending the steady legs.  Do not use the fitted supports as a vehicle jack. They supports are only for stabilising the parked vehicle to prevent the rear axle from bottoming out.

  • Page 67: Connection

    Setting up the vehicle ◼ Retracting: Place the socket spanner on the hexagon nut (Fig. 58,1) and rotate until the steady leg is clear of the ground. ◼ If the length of the steady leg can be adjusted, remove the splint (Fig.

  • Page 68: Satellite Unit With Manual Satellite Selection (Telesat)

    Setting up the vehicle  The vehicle must be still during the satellite search. Do not walk through the vehicle.  Satellite reception is only possible, when the antenna is positioned in di- rect line of sight of the chosen satellite and the view is not blocked in any way.

  • Page 69: Satellite Unit With Automatic Antenna Alignment (Oyster Premium)

    Setting up the vehicle ◼ Choosing a satellite: Press the SAT button (Fig. 59,4) repeatedly until the LED (Fig. 59,1) indi- cates the desired satellite. The antenna automatically aligns with this satellite. When the unit has found the satellite, the LED (Fig. 59,1) is lit perma- nently and "SAT OK"...
  • Page 70 Setting up the vehicle Operating buttons on the back of the device Standby mode/operation LED ON/OFF flip switch Fig. 60 Operation on the flat screen POWER push button Manual control of antenna EXIT button - exit menu without saving Programme selection buttons OK push button - confirm selection or save setting SOURCE button - select signal...

  • Page 71: Awning (Special Equipment)

    Setting up the vehicle ◼ Operating the unit without Press the PARK button (Fig. 61,2). The antenna moves into parking posi- using the antenna: tion. ◼ Press the SOURCE button (Fig. 61,6) repeatedly until the desired signal source (e.g. DVD) has been selected. ◼...
  • Page 72 Setting up the vehicle Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 73: Living

    Living Living Chapter overview This chapter contains instructions about living in the vehicle. Central locking system (special equipment)  The central locking system locks the driver's door and the body's con- version door.  The central locking system has no function, if the battery cut-off switch on the transformer/rectifier is switched off.

  • Page 74: Conversion Door And Driver's Door

    Living Locking all doors: ◼ Press the button (Fig. 64,2) once briefly. All doors have been locked. If one ore more doors have not been correctly closed, the direction indica- tors will be flashing rapidly.  Further information can be found in the instruction manual of the base vehicle.

  • Page 75: Driver's Door, Outside

    Living 7.2.1 Driver's door, outside Fig. 66 Door lock (driver's door, out- side) ◼ Opening: Insert the key into locking cylinder (Fig. 66,2) and turn until the door lock is unlatched. ◼ Return the key to the central position and remove it. ◼...

  • Page 76: Conversion Door, Outside

    Living 7.2.3 Conversion door, outside Fig. 68 Door lock (conversion door, outside) ◼ Opening: Insert the key into locking cylinder (Fig. 68,1) and turn until the door lock is unlatched. ◼ Return the key to the central position and remove it. ◼...

  • Page 77: Window Conversion Door (Partially Special Equipment)

    Living 7.2.5 Window conversion door (partially special equipment) The conversion door window is fitted with a Roman shade. Fig. 70 Roman shade ◼ Closing: Grip the Roman shade (Fig. 70,2) in the middle of the holding bar (Fig. 70,1), pull it upwards and then release it at the desired height. The Roman shade will stay at this height.

  • Page 78: External Flaps

    Living External flaps  Before commencing the journey, close all external flaps and lock them.  To open and close the external flap, open or close all locks that are fitted to the external flap.  When leaving the vehicle, close all external flaps. The external flaps fitted to the vehicle are all fitted with identical locking cylinders.

  • Page 79: Garage Flap Emergency Release

    Living 7.3.2 Garage flap emergency release The garage flap can be opened from the interior using the emergency re- lease. The emergency release is even possible if the garage flap has been locked with the key. Fig. 73 Garage flap emergency re- lease ◼...

  • Page 80: Service Unit Flap Lock

    Living ◼ Closing: Firmly close the external flap. ◼ Turn lock handle in a clockwise direction until it is horizontal. The flap lock is now engaged but not locked. ◼ Insert key into locking cylinder. ◼ Press down lock handle with key inserted and turn key a quarter turn in a clockwise direction.

  • Page 81: Flap Lock, Square

    Living 7.3.5 Flap lock, square Locking cylinder Fig. 77 Flap lock, square ◼ Opening: Open the cap (Fig. 77,1). ◼ Insert key into locking cylinder (Fig. 77,2) and turn a quarter turn. ◼ Remove the key. ◼ Closing: Firmly close the external flap. ◼...

  • Page 82: Flap For The 230 V Connection (Lyseo Time I)

    Living ◼ Closing: Close the service flap and press it shut. The push-button locks are now engaged but not locked. ◼ Insert the key into locking cylinder of the lockable push-button lock (Fig. 78,1 or Fig. 79,1) and turn a quarter turn. The push-button lock is locked.

  • Page 83: Furniture Flaps

    Living Furniture flaps  Before commencing the journey, close all furniture flaps and inner doors and lock them.  The furniture flaps shown in this section are examples. Depending on the model, the locks and handles on the furniture flaps may differ to those displayed here.

  • Page 84: Furniture Flaps With Handle And Push Button

    Living 7.4.3 Furniture flaps with handle and push button Fig. 85 Furniture flap with handle (example) ◼ Opening: Press the release knob (Fig. 85,1) on the handle (Fig. 85,2) and hold it down. ◼ Pull handle until furniture flap is open. ◼...

  • Page 85: Floor Compartment Cover

    Living Floor compartment cover Fig. 87 Floor compartment cover Fig. 88 Floor compartment cover (handle recessed) (handle swung out) ◼ Opening: Push one side of the grip plate (Fig. 87,1) downwards. The handle (Fig. 88,1) swivels upwards. ◼ Remove the cover (Fig. 87,2 or Fig. 88,2) upwards. ◼...

  • Page 86: Light Switches

    Living Light switches 7.7.1 Entrance area  The light switches shown in this section are examples. Depending on the model, the type and allocation of the light switches may differ to those displayed here. Fig. 90 Light switch Fig. 91 Awning light The entrance area has light switches (Fig.
  • Page 87 Living Fig. 94 Separate light switch Fig. 95 Switch (driver's cabin) The reading lamp in the driver's cabin is switched via a switch (Fig. 95,1) in the driver's cabin. Fig. 96 Spotlight, shiftable Fig. 97 Spotlight In the case of spotlights, the light switch (Fig. 96 or Fig. 97,1) is normally lo- cated directly at the lamp.

  • Page 88: Light Control (Ixeo I)

    Living Fig. 100 Tube lamp, swivelling The light switch (Fig. 100,1) for the tube lamp is mounted directly on the lamp. The tube lamp (Fig. 100,2) can be swivelled to the side. 7.7.3 Light control (Ixeo I) Depending on the model, the vehicle is equipped with a light control. At the switches in the living and sleeping area, you can switch lighting scenarios for these areas via four buttons.

  • Page 89: Wardrobe Light

    Living 7.7.4 Wardrobe light  The wardrobe light can be removed from its holder (Fig. 102,1) and used as a torch.  When the wardrobe door is closed, the wardrobe light switches off auto- matically.  A brightness sensor ensures that the wardrobe light comes on only when it is dark.

  • Page 90: Mobile Lamp (Special Equipment)

    Living 7.7.6 Mobile lamp (special equipment)  Fasten all mobile lamps at the active docking stations in the wardrobe during the journey. The mobile lamp can be used as an additional lamp, as a table lamp, or as a torch. The mobile lamp is equipped with a rechargeable battery that is charged in a docking station in the wardrobe.

  • Page 91: Holder For Flat Screen

    Living ◼ Charging: Push lamp together (Fig. 104) and plug onto active docking station (Fig. 106) in the wardrobe. The LED (Fig. 104,2) next to the On/Off switch shows the charging con- dition. A red LED means that the rechargeable battery is being charged. A green LED means that the rechargeable battery has been charged.

  • Page 92: Holder With Release Lever

    Living 7.8.2 Holder with release lever The holder for the flat screen is attached to the wall. Fig. 108 Holder with release lever ◼ Positioning: Push the release lever (Fig. 108,2) to the side and turn the holder (Fig. 108,1) with the flat screen to the desired position. ◼...

  • Page 93: Windows

    Living Condensation Ensure that there is a continuous exchange of air by providing frequent and efficient ventilation. This is the only method for ensuring that condensation and resulting mould is not formed during cool weather. During the colder season, a pleasant living climate is created if heating output, air distribution and ventilation are synchronised.

  • Page 94: Hinged Window

    Living 7.10.1 Hinged window  If windows with automatic hinges are fitted, open the window fully in or- der to release the lock. If the locking device is not released and the win- dow is closed nevertheless, there is the danger of the window breaking due to the massive counter-pressure.
  • Page 95 Living ◼ Closing: Hinged window with rotary hinge: Turn knurled knob (Fig. 111,1) until the latch is released. Hinged window with automatic hinge: Open the hinged window as wide as is necessary to release the lock. ◼ Close the hinged window. ◼...

  • Page 96: Sliding Window With Pressure Lock

    Living 7.10.2 Sliding window with pressure lock Fig. 115 Sliding window, locked Fig. 116 Sliding window, unlocked ◼ Opening: Push the latch (Fig. 115,1) downwards. ◼ Open the window to the desired position. ◼ Closing: Close the window as far as it can go. ◼...

  • Page 97: Roman Shade And Insect Screen

    Living 7.10.4 Roman shade and insect screen The windows are fitted with a Roman shade and an insect screen. The insect screen can only be moved together with the Roman shade. Fig. 118 Hinged window Roman shade The Roman shade is located in the bottom blind box. ◼...

  • Page 98: Heki Skylight

    Living  The skylights are fitted with a blind or Roman shade and with an insect screen or folding insect screen. After the latch has been released, the blind and insect screen automatically spring back to the initial position by tensile force. In order not to damage the tension mechanics, hold onto the blind or insect screen and allow it to slowly return to the initial posi- tion.
  • Page 99 Living ◼ Closing: Use both hands to push the bar (Fig. 120,1) slightly upwards. ◼ Push the bar back in the guides. ◼ Push the bar upwards with both hands until it is above the safety knob (Fig. 119,2). Fig. 121 Guide (ventilation position) Fig.

  • Page 100: Skylight With Snap Latch

    Living 7.11.2 Skylight with snap latch Fig. 123 Skylight with snap latch Fig. 124 Handles with snap latches The skylight can be pushed upwards either from one side or from both sides. ◼ Opening: Use handle (Fig. 123,1) to swing down the insect screen (Fig. 123,2). ◼...

  • Page 101: Wind-Up Skylight (Partially Special Equipment)

    Living 7.11.3 Wind-up skylight (partially special equipment) Fig. 126 Wind-up skylight The wind-up skylight can be opened using the hand crank. ◼ Opening: Rotate the hand crank (Fig. 126,2) until a resistance can be felt. ◼ Closing: Rotate the hand crank until the wind-up skylight is closed. The wind-up skylight can be locked after rotating two or three more times.
  • Page 102 Living Fig. 127 Omni-Vent skylight Fig. 128 Control panel for fan ◼ Opening: Turn the knob (Fig. 127,1) until the desired opening angle is reached. ◼ Closing: Turn the knob (Fig. 127,1) until the skylight is fully closed. Insect screen To close and open the insect screen: ◼...

  • Page 103: Tables

    Living ◼ Boost function: Press and hold the Aerate button for approx. 3 seconds. The fan switches to the maximum aeration level and then, after approximately 5 minutes, automatically switches back to the previously selected level. ◼ Press and hold the Vent button for approx. 3 seconds. The fan switches to the maximum venting level and then, after approximately 5 minutes, automatically switches back to the previously selected level.

  • Page 104: Lift-Off Table, Divisible

    Living ◼ Fold lever (Fig. 129,1) downward. Moving in a crossways direction: ◼ Push the table top to the desired position. ◼ Fold the lever back upwards.  Before lowering the table top, remove the cushions from the benches or shift the table top (depending on the installation situation).
  • Page 105 Living ◼ Reducing the table top size: Lift table top half by its free side and set it down carefully on the other table top half. ◼ Hold the supporting frame (Fig. 131,1) on both sides and push it under- neath the table top as far as it will go.

  • Page 106: Suspension Table With Fold-Out Leg

    Living 7.12.4 Suspension table with fold-out leg Table leg The fold-out leg can be folded at the centre for the conversion to bed. Two additional support legs can then be inserted on the table top's bottom side. Table top The suspension table size can be enlarged by inserting a table top extension. Fig.

  • Page 107: Beds

    Living Fig. 135 Suspension table as bed foundation ◼ Conversion to bed Increase the table size using table-top extension (see above). foundation: ◼ Lift the front of the table top (Fig. 135,1). ◼ Fold the lower part of the fold-out leg (Fig. 135,3) by 90°. ◼...
  • Page 108 Living  You must be able to close the pull-down bed without any great effort, so that there is no tension in the locking position. Objects on the pull-down bed can distort the lifting mechanism on one side, resulting in damage. Depending on the model, the pull-down bed will be secured in the top end position either by retaining belts or by a latching mechanism.

  • Page 109: Pull-Down Bed, Electrically Operated (Partially Special Equipment)

    Living ◼ Lifting the pull-down bed: Switch off the lamps in the pull-down bed. ◼ Pull-down bed with retaining belts: push pull-down bed upwards at the handle (Fig. 137,1). Secure pull-down bed with both retaining belts (Fig. 136,1) on the left and right. ◼...
  • Page 110 Living  But in particular with regard to small children less than 6 years of age, users should ensure that they cannot fall out of the pull-down bed.  Use separate children's beds or travel cots suitable for children.  If there is a safety net: Only use the pull-down bed, if the safety net is set up.
  • Page 111 Living Making ready for operation After every power interruption (e.g. lay-up over winter), the electrical drive must be made ready for operation again. To do so carry out a reference run.  If the pull-down bed is at an angle during the reference run: Immediately end the reference run.

  • Page 112: Pull-Down Bed At The Rear, Electrically Operated (Special Equipment)

    Living Fig. 142 Drive for the pull-down bed If it is not possible to move the pull-down bed via the arrow keys (Fig. 140), Emergency operation check the fuse Circuit 5 on the EBL 220 (see section 9.12.1). If the pull- down bed cannot be moved despite an intact fuse, the pull-down bed must be operated manually.
  • Page 113 Living  Before starting a journey, the pull-down bed must be in the top end posi- tion. Do not stow any bulky items or bedding on the pull-down bed so that the pull-down bed can move to the top end position. ...
  • Page 114 Living Fig. 145 Storage compartment and Fig. 146 Pull-down bed at the rear, removed back cushion lowered ◼ Lowering the pull-down Remove back cushion (Fig. 145,1) of the rear seating group. bed: ◼ Remove any other obstacles in the area into which the pull-down bed extends, e.g.

  • Page 115: Queen Size Bed, Extendable In Length (Ixeo Time I)

    Living Emergency operation If it is no longer possible to move the pull-down bed with the arrow keys (Fig. 143,1 and 4), first of all check the fuse behind the panelling (Fig. 147,2) (see section 9.12.1). If the fuse is okay and it is still not possible to move the pull-down bed, operate the pull-down bed manually.

  • Page 116: Fixed Bed, Height-Adjustable Via Strap System (Special Equipment)

    Living ◼ Shortening the queen size Lift the mattress (Fig. 148,1). bed: ◼ Use the handle (Fig. 149,2) to push the extension (Fig. 149,1) in as far as it will go. 7.13.5 Fixed bed, height-adjustable via strap system (special equip- ment) ...

  • Page 117: Lying Surface Of Single Beds

    Living 7.13.6 Lying surface of single beds The two single beds in the rear can be converted into a combined lying sur- face. The additional cushions are stored in a cabinet underneath the bed. Fig. 152 Additional cushion Fig. 153 Additional cushion holder ◼...

  • Page 118: Converting Seating Groups For Sleeping

    Living 7.14 Converting seating groups for sleeping The following table gives an overview of the seating groups installed in the different models and names the section in which the bed conversion is de- scribed.  The ground plans for the individual models are shown in chapter 17. Model Seating group Table type...

  • Page 119: Conversion Of L-Seating Group Into Transverse Bed

    Living 7.14.1 Conversion of L-seating group into transverse bed Fig. 156 Prior to conversion Fig. 157 After conversion ◼ Convert the lift-off table as a bed foundation (see section 7.12). ◼ Place the additional cushion on the table (see Fig. 157). When doing this, put the angled cushion side of the in touch with the lateral seat of the L- seating group.

  • Page 120: Conversion Of L-Seating Group Into Guest Bed

    Living 7.14.3 Conversion of L-seating group into guest bed Fig. 160 Prior to conversion Fig. 161 After conversion ◼ Rotate the driver's seat towards the table. ◼ Push driver's seat fully forward (away from the table). ◼ Convert the lift-off table as a bed foundation (see section 7.12). ◼...

  • Page 121: Conversion L-Seating Group Into Transverse Bed (With Additional Cushion Table)

    Living 7.14.5 Conversion L-seating group into transverse bed (with addi- tional cushion table) Fig. 164 Prior to conversion Fig. 165 After conversion ◼ Turn and shift table top such that it can be lowered between the L-seat- ing group and the lateral seat. ◼...

  • Page 122: Shower Connection Point For External Shower (Special Equipment)

    Living 7.15 Shower connection point for external shower (special equipment)  Only use the external shower if there is a gap of at least 1.20 m be- tween the shower and the nearest electrical device or connection. Risk of electric shock! ...

  • Page 123: Gas System

    Gas system Gas system Chapter overview This chapter contains instructions regarding the gas system of the vehicle. The operation of the gas operation appliances of the vehicle is described in chapter 10. General  The operator of the gas system is responsible for the performance of recurring inspections and for complying with the maintenance inter- vals.

  • Page 124: Gas Bottles

    Gas system  Ignition safety valves must close within 1 minute after the gas flame has extinguished. A clicking sound is audible. Check function from time to time.  The built-in gas devices are exclusively meant for use with propane or butane gas or a mixture of both.
  • Page 125 Gas system  Depending on the connection, unscrew the gas tube from the gas bot- tle and screw it on the gas bottle again by hand or using an suitable special spanner. The screw connection on the gas bottle generally has a left-hand thread.

  • Page 126: Gas Isolator Taps

    Gas system Gas isolator taps Cooker Hot water Refrigerator Oven/grill Heater Hot water/heater Fig. 169 Possible symbols for the gas isolator taps A gas isolator tap (Fig. 169) for every gas device is built into the vehicle. The gas isolator taps are located in the vehicle at different positions, and can also be fitted separately.

  • Page 127: Gas Bottle Switching Facility (Special Equipment)

    Gas system  Once you have made the connection and opened the gas isolator tap, make sure that no gas is escaping at the connection point. If there is a leak in the external gas connection, gas will escape into the open air. Immediately close the gas isolator tap and the regulator tap on the gas bottle.
  • Page 128 Gas system Facility without Crash The gas bottle switching facility consists of a combined gas pressure regula- Protection Unit (CPU) tor with reversing valve and indicator (Fig. 172,3). The gas bottle switching facility is installed between the two gas tubes (Fig. 172,1). Fig.
  • Page 129 Gas system Function The gas bottle switching facility ensures a constant gas pressure, regardless of which gas bottle is being drawn upon. The display in the reversing valve shows the filling level of the primary bottle. The gas supply comes from the primary bottle when the display is green.
  • Page 130 Gas system ◼ Putting into operation: Open the regulator taps of the gas bottles (Fig. 172,4 or Fig. 173,6). ◼ Press the hose break guards (Fig. 173,5) successively for 10 seconds. ◼ Use the knob (Fig. 172,2 or Fig. 173,3) on the switching facility to select the gas bottle which is to be the primary source of gas (primary bottle).

  • Page 131: Changing Gas Bottles

    Gas system Changing gas bottles  When changing gas bottles, do not smoke or create any open fire.  Depending on the connection, unscrew the gas tube from the gas bot- tle and screw it on the gas bottle again by hand or using an suitable special spanner.
  • Page 132 Gas system Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 133: Electrical System

    Electrical system Elec trical syst em Chapter overview This chapter contains instructions regarding the electrical system of the ve- hicle. The operation of the electrical appliances of the housing body is described in chapter 10. General safety instructions  Only allow qualified personnel to work on the electrical system. ...

  • Page 134: Usb Socket

    Electrical system Total discharge Total discharge of the battery is imminent, if a battery is completely dis- charged by an active appliance and by closed circuit current and the off-load voltage falls below 12 V.  Total discharge damages the battery. Capacity Capacity refers to the amount of electricity which can be stored in a battery.

  • Page 135: Power Supply

    Electrical system 12 V power supply  Only connect devices with a maximum of 10 A to the sockets (Fig. 179,1) of the 12 V power supply. Fig. 179 12 V/10 A socket 9.4.1 Selector switch for power supply of the multimedia system (special equipment) Depending on the equipment, a multimedia system may be installed in the vehicle.

  • Page 136: Starter Battery

    Electrical system 9.4.2 Starter battery The starter battery serves for starting the engine and supplies the electrical appliances of the base vehicle as well as optional devices such as the radio, navigation system or central locking system with voltage.  Total discharge damages the battery.
  • Page 137 Electrical system  If the starter battery or living area battery are disconnected, do not ap- ply the ignition. There is a danger of short circuit from exposed cable ends.  Take note of the battery manufacturer's users and maintenance instruc- tions.

  • Page 138: Charging Batteries Via A 230 V Power Supply

    Electrical system Even a fully charged living area battery can, after an extended period, be fully discharged via a closed-circuit current (inactive appliances). Low temperatures outside reduce the capacity available. The self-discharge rate of the battery is also dependant on temperature. At 20 to 25 °C the self-discharge rate is approx.

  • Page 139: Transformer/Rectifier (Ebl 119) (Lyseo Time I)

    Electrical system During the journey, the living area battery is charged by the vehicle's alter- nator. Fluctuations in the charging current and a drop in voltage between the alternator and the living area battery affect the battery's performance. The charging booster is used to keep the charging current of the alternator constant and to compensate for any drops in voltage.
  • Page 140 Electrical system Fig. 181 Transformer/rectifier (EBL 119) Main supply socket 230 V~ Output: Block 1 – refrigerator Input: Block 2 – control lines Output: Block 4 – heater, safety/drainage valve, basic light (lighting in the en- trance area), entrance step Output: Block 3 –...

  • Page 141: Battery Cut-Off Switch

    Electrical system Position See chapter 17. 9.6.1 Battery cut-off switch  After switching the battery cut-off switch back on again: Put the basic light (lighting in the entrance area), entrance step, heater and spare 4 back into service (depending on the model). To do so, switch on the 12 V main switch briefly.

  • Page 142: Charging The Battery

    Electrical system 9.6.4 Charging the battery When the vehicle engine is running, a relay in the transformer/rectifier alter- nator switches on the living area battery and the starter battery together and recharges them with the vehicle generator. When the vehicle engine is switched off, the batteries are automatically disconnected from one another again by the transformer/rectifier.
  • Page 143 Electrical system Fig. 182 Transformer/rectifier (EBL 630) 50 A main fuse, 12 V power supply Connection for auxiliary charging unit 1 Flat fuses for chargers and solar regulator Connection for solar regulator Connection for panel Bus connection Diagnostics LED Bus connection Bus connection 10 LIN bus connection 11 Connection for external temperature sensor...
  • Page 144 Electrical system Some electric circuits are still supplied with current even when the 12 V power supply has been switched off on the panel. These include: ⚫ Basic light ⚫ Refrigerator ⚫ Step ⚫ Awning light ⚫ Heater When the vehicle is laid up, these appliances are also disconnected from the battery.

  • Page 145: Battery Monitor

    Electrical system Battery selector switch  If the battery selector switch is set incorrectly, there is a risk of gener- ating oxyhydrogen gas. Danger of explosion!  The factory settings of the battery selector switch must not be changed.  Have batteries changed by qualified persons only.

  • Page 146: Panel Lt 96 (Lyseo Time I)

    Electrical system Panel LT 96 (Lyseo Time I) 12 V indicator lamp Button for reading the battery volt- age of the living area battery 230 V indicator lamp Button for reading the filling level in the water tank Indicator lamp water pump Button for water pump (On/Off) Button for reading the filling level in the waste water tank...

  • Page 147: V/Tank Gauge For Battery Voltage And Water Or Waste Water Levels

    Electrical system 9.8.2 V/tank gauge for battery voltage and water or waste water levels Battery voltage The V/tank gauge is for the indication of the battery voltage of the starter battery or the living area battery. With the V/tank gauge (Fig. 183,8), note the left scale. The gauge automati- cally lights up as soon as a button is pressed.

  • Page 148: Button For Water Pump

    Electrical system  Measure the off-load voltage preferably several hours after the previous charging (e.g. in the morning) and not directly after a current drain. Volume of water/ The V/tank gauge is for the indication of the quantity of water or waste wa- waste water ter.

  • Page 149: 230 V Indicator Lamp

    Electrical system 9.8.6 230 V indicator lamp The 230 V indicator lamp (Fig. 183,3) illuminates whenever line voltage is available at the transformer/rectifier input.  Further information can be obtained in the manufacturer's instruction manual. Panel LT 633 (Ixeo I) ...
  • Page 150 Electrical system ◼ Cancelling deactivation: Press and hold rotary knob (Fig. 184,8) for approx. 5 seconds. The living area battery symbol (Fig. 184,2) is flashing and "On" appears on the dis- play (Fig. 184,10). ◼ Release the rotary knob. The 12 V ON symbol (Fig. 184,1) is lit. The power supply has been switched on.
  • Page 151 Electrical system The following tables will help you correctly interpret the battery voltage of the living area battery displayed on the panel. Battery voltage Mobile operation Battery operation Power operation (vehicle moving, no (vehicle stationary, (vehicle stationary, (values during 230 V connection) no 230 V connec- 230 V connection) operation)

  • Page 152: Solar Installation (Special Equipment)

    Electrical system ◼ Displaying tank levels: Turn the rotary knob until the water tank symbol (Fig. 184,4) lights up. The symbol "%" is lit. The fill level of the water tank appears for approx. 20 seconds on the display. ◼ Turn the rotary knob until the waste water tank symbol (Fig.

  • Page 153: Power Supply

    Electrical system Fig. 185 Status indicator, solar charge regulator Four LEDs (Fig. 185,3) show the current operating state. Another LED (Fig. 185,1) shows whether output voltage is present. Status Signification Operating state LEDs Flashing cyclically Battery being charged (Fig. 185,3) Lit up Battery is fully charged LED 25 % (Fig.

  • Page 154: Connection (Cee Socket Outlet)

    Electrical system 9.11.1 230 V connection (CEE socket outlet)  Overvoltage can damage connected devices. Overvoltage can be caused by lightning, irregular voltage sources (e.g. petrol-operated generators) or power connections on ferries for example. ⚫ Requirements concerning The connecting cable, the plug connectors at the point of supply and the the 230 V connection plug connector to the vehicle must comply with IEC 60309.
  • Page 155 Electrical system Fig. 186 230 V fuse box Fig. 187 230 V fuse box (variant) Test button Test button Safety cut-out Safety cut-out Fuse box Fuse box Combined fault current protection Combined fault current protection switch / safety cut-out switch / safety cut-out ◼...

  • Page 156: Fuses

    Electrical system ◼ Plug the connector of the connecting cable into the socket of the power supply device. Ensure that the detent of the spring-mounted pivoting cover is engaged in position. ◼ Switch on the safety cut-outs in the fuse box. ◼...

  • Page 157: Fuses

    Electrical system 9.12.1 12 V fuses The appliances connected to the 12 V power supply in the living area are fused individually. The fuses are accessible at different positions in the vehi- cle. Unbroken fuse element Broken fuse element Fig. 190 12 V fuse An intact 12 V fuse can be detected by the unbroken fuse element (Fig.
  • Page 158 Electrical system Fuses on the living area The fuses are fitted next to the living area battery. battery Jumbo flat fuse 50 A/red (for transformer/rectifier) Flat fuse: 2 A/grey (Lyseo Time I) 5 A/light brown (Ixeo I) (for battery sensor, living area bat- tery) Fig.
  • Page 159 Electrical system Function Value/colour Fuses on the transfor- Internal charger module 20 A yellow mer/rectifier EBL 119 Compressor/AES refrigerator 20 A yellow Heater 10 A red Basic light/electrically operated entrance step/radio 25 A white Spare 4 25 A white Spare 3 25 A white Spare 2 15 A blue...
  • Page 160 Electrical system Fuse for the Thetford toilet The toilet has a maintenance-free fuse which resets automatically. (swivel toilet C-260) Fuse for waste water The control unit has an electronic overload protection. In the event of an heating overload, the waste water heating switches off. To restart, disconnect the control unit briefly from the power supply.

  • Page 161: 230 V Fuse

    Electrical system 9.12.2 230 V fuse  Check the fault current protection switch for each connection to the 230 V power supply, at least once every 6 months.  In international language usage, the fault current protection switch is also denominated RCD (Residual Current Device). Fig.

  • Page 162: External Socket (Special Equipment)

    Electrical system 9.13 External socket (special equipment) TV socket 12 V socket SAT socket 230 V socket Fig. 198 External socket The 230 V socket and the 12 V socket can be used to power electrical de- vices in the awning. TV socket and SAT socket offer various possibilities for TV operation: Connection possibilities Fig.

  • Page 163: Circuit Diagrams

    Electrical system 9.14 Circuit diagrams 9.14.1 Circuit diagram, interior (EBL 119) Fig. 201 Circuit diagram, interior (EBL 119) Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 164: Circuit Diagram, Interior (Ebl 630, Bus System)

    Electrical system 9.14.2 Circuit diagram, interior (EBL 630, bus system) Fig. 202 Block diagram for energy supply of transformer/rectifier EBL 630 Description Signification T amb External temperature sensor LT 633 Panel LR… Solar regulator EBL 630 B Transformer/rectifier Starter battery Living area battery LAS...

  • Page 165: Connection Diagram, Panel (Lt 96)

    Electrical system 9.14.3 Connection diagram, panel (LT 96) Fig. 203 Connection diagram, panel (LT 96) 2 x AMP connectors 4,8 x 0,8 Pump + 12 V Lumberg MSFQ 5-pin full Base waste water tank Lumberg MSFQ 6-pin full Base water tank n.

  • Page 166: Connection Diagram, Panel (Lt 633)

    Electrical system 9.14.4 Connection diagram, panel (LT 633) Fig. 204 Connection diagram, panel (LT 633) Pin header Type Signal MSFQ/0 4-pin AD 1 AD 2 + 12 V LED MSFQ/0 3-pin + 12 V MSFQ/0 5-pin + 12 V + 12 V panel EBL On MSFQ/0 2-pin Internal temperature...

  • Page 167: Circuit Diagram, Exterior

    Electrical system 9.14.5 Circuit diagram, exterior Fig. 205 Circuit diagram, exterior Colour of Signal conductor X1 Central connector (MCP 12-pole) Tail light, left Tail light, right Direction indicator lamp, left Direction indicator lamp, right Brake light, left Brake light, right Third brake light Fog tail light, left Right fog tail lights...
  • Page 168 Electrical system Colour of con- Colour of con- Signal ductors ductors of wiring har- of tail light ness Connector for tail light, left Reverse light (Superseal 6-pole) Fog tail light Direction indicator light Brake light Tail light Connector for tail light, right Reverse light (Superseal 6-pole) Fog tail light...

  • Page 169: Appliances

    Appliances Applianc es Chapter overview This chapter contains instructions regarding the appliances of the vehicle. The instructions refer exclusively to the operation of the appliances. Further information about the appliances can be found in the instruction manuals for the appliances, included separately with the vehicle. 10.1 General ...

  • Page 170: Heater And Boiler

    Appliances 10.2 Heater and boiler The heater can both heat up the vehicle interior (heating the room air) and heat up the domestic water (boiler function). The following instructions are also valid if the heater is only used as boiler. ...

  • Page 171: To Heat Properly

    Appliances 10.2.2 To heat properly  Hot air may damage the floor covering. Do not point the air outlet noz- zles towards the floor covering. Fig. 207 Air outlet nozzle (hot-air heater) Hot air distribution Several air outlet nozzles (Fig. 207) are built into the vehicle. Pipes conduct the warm air to the air outlet nozzles.
  • Page 172 Appliances Gas opera- Electrical opera- Mixed operation (gas and electrical opera- tion tion tion) Maximum heat output 6000 W 1800 W 5800 W The operating unit is divided into two sections: Operating unit ⚫ Display ⚫ Operating buttons Display Rotary push button Back button Fig.
  • Page 173 Appliances Display Status line Upper menu line Display line voltage 230 V Lower menu line Rotary push button Back button Settings and values display area Timer display Fig. 209 Operating unit with displays Display The display is divided into four sections: ⚫...
  • Page 174 Appliances ◼ Turn rotary push button until required value is displayed. ◼ Press rotary push button to save the value set. The symbol in the status line (Fig. 209,2) flashes until the room temperature set is reached. If you do not wish to change the value originally set: Press back button (Fig.
  • Page 175 Appliances Fig. 211 Safety/drainage valve (boi- ler) Position See chapter 17. Filling/emptying the boiler The boiler can be supplied with water from the water tank. ◼ Filling the boiler with water: Switch on the 12 V power supply on the panel. ◼...
  • Page 176 Appliances ◼ Press the rotary push button to save the set operating mode. To revert to the original setting: Press back button (Fig. 209,7).  230 V electrical operation is only possible when the vehicle is connected to the 230 V power supply. ...

  • Page 177: Alde Hot-Water Heater And Boiler (Partially Special Equipment)

    Appliances Fault display The warning symbol (Fig. 210,7) flashes in the event of a warning. The heater continues to operate. In the event of only a temporary fault, the warning symbol goes out automatically. In the event of a warning, the control unit displays the error code for the fault.
  • Page 178 Appliances  When no button is pressed, the operating unit automatically switches to home position after two minutes.  Changes to the settings are saved automatically after 10 seconds. Operating buttons The operating buttons have the following functions: Pos. in Button Function Fig.
  • Page 179 Appliances Adjustment menu The "MENU" button calls up the adjustment menu. The meanings of the indi- vidual symbols are described in the following table. Fig. 214 Adjustment menu (opera- ting unit) The values can be increased or reduced via the "+" or "-" symbols. Symbol Signification Setting the desired temperature of +5 to +30 °C...
  • Page 180 Appliances Selecting 230 V electrical ◼ Press the "+" button next to the " " symbol until the desired heat output operation: is reached.  Select the output level during 230 V electrical operation in such a way that it corresponds to the 230 V connection protection: Level 1 (1 kW) at 6 A Level 2 (2 kW) at 10 A Level 3 (3 kW) at 16 A...
  • Page 181 Appliances ◼ Setting the output: Turn the control knob (Fig. 215,2) in an anticlockwise direction. The out- put is reduced. ◼ Rotate the control knob in a clockwise direction. The output is increa- sed. 3-way valve For models with a rear bed, a 3-way valve is connected to the hot-water heater circulation.
  • Page 182 Appliances Turning off the vehicle ◼ Press the " " button (Fig. 212,3) on the operating unit (Fig. 212). heating by heat exchanger: Fig. 217 Alde heat exchanger ◼ Turning on: Set stopcock handle (Fig. 217,1) parallel to the pipe. ◼...
  • Page 183 Appliances Fig. 219 Operating switch for auxiliary circulating pump The auxiliary circulating pump switch (Fig. 219) is located next to the hot- water heater operating unit. The yellow indicator lamp illuminates when the pump is operated. Filling/emptying the boiler The boiler can be supplied with water from the water tank. ...

  • Page 184: Wall Flue

    Appliances  For further information, see the separate manufacturer's instruction manual and observe the maintenance instructions found in chapter 13. Position of the drain See chapter 17. cock(s) 10.2.5 Wall flue Fresh air and exhaust gases of the heater system are conducted in a two- chamber wall flue.

  • Page 185: Electrical Floor Warming Unit (Special Equipment)

    Appliances 10.2.6 Electrical floor warming unit (special equipment)  On models with electrical floor warming unit, never drill holes in the floor or screw in any screws. Careful with sharp objects. There is dan- ger of a power cut or a short circuit due to damage to a heater wire. ...

  • Page 186: Air Conditioning Unit (Special Equipment)

    Appliances 10.3 Air conditioning unit (special equipment) 10.3.1 Truma Aventa air conditioning unit  The cooling circuit may only be opened by the manufacturer or an au- thorised specialist workshop.  Do not block the air inlets and air outlets. ...
  • Page 187 Appliances Remote control All functions of the air conditioning unit can be operated via the remote con- trol. Display On/Off button Buttons "+" and "–" for temperature selection Sliding door for field with setting buttons Fan setting selection button (three levels) Mode selection button Fig.
  • Page 188 Appliances ◼ Switching on/off manually: Press the micro button (e.g. with a ballpoint pen if the remote control is not in reach). Status LED Signification Function display Blue LED flashes Compressor starts up (cooling mode) Blue LED lights up Cooling operation Yellow LED flashes Compressor starts up (heating mode) Yellow LED lights up...
  • Page 189 Appliances Buttons for setting the time and the timer Send button (repeat data transfer) Micro button "RESET" (resetting to the factory setting) Setup button for start-up Light button (for operating the lighting) Soft-start button (for quiet cooling operation) Time button (for setting the time) "TIMER"...

  • Page 190: Telair

    Appliances 10.3.2 Telair  Always wait at least 2 minutes between switching off and switching on again. Otherwise the compressor will be damaged.  If the unit is operating, always open at least one ventilation flap.  The air conditioning unit only runs if the vehicle is connected to a 230 V power supply.

  • Page 191: Controlling Terminals Via An App (Special Equipment)

    Appliances ◼ Use the temperature increase button (Fig. 228,6) or temperature reduc- tion button (Fig. 228,8) to set the required temperature. ◼ Use the ventilation speed button (Fig. 228,9) to select the required ven- tilation level. ◼ Switching off: Press the "ON/OFF" button (Fig. 228,7). ...
  • Page 192 Appliances ◼ Press the BLUETOOTH button (Fig. 230,1) on the iNet-Box for 1 second. The Truma iNet-Box will be visible in the mobile terminal for approx. 2 minutes (name: "Truma iNet-Box"). During this period, the blue BLUE- TOOTH LED (Fig. 230,7) will be flashing. ◼...

  • Page 193: Cooker

    Appliances 10.5 Cooker  During operation of the gas cooker, do not leave the gas cooker unat- tended. Even if the gas cooker cannot be overseen for only a short time (e.g. Visit to the toilet), switch the gas cooker off. ...

  • Page 194: Gas Oven (Dometic) (Special Equipment)

    Appliances Automatic ignition The gas cooker is equipped with electronic ignition. (with lighting knob) Fig. 231 Operating controls for gas cooker ◼ Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Cooker". ◼ Open the gas cooker cover. ◼...
  • Page 195 Appliances  Place the meals, wire rack and drip pan into the gas oven so that they do not come into contact with the flame.  Only ignite the oven when the oven door is open.  If the oven is installed into the bottom cupboard: Attach heat protec- tion sheet to the ventilation grill.

  • Page 196: Microwave Oven (Special Equipment)

    Appliances The gas oven is equipped with electronic ignition. Fig. 234 Gas oven (Dometic TecTo- Fig. 235 Gas oven (Dometic) wer) The meaning of the symbols on the control knobs (Fig. 234,1 and Fig. 235,1) of the two gas ovens is identical: stand for the oven.

  • Page 197: Extractor Hood (Special Equipment)

    Appliances  For cooking times under 2 minutes: First twist the cooking time control knob past "2" and then twist it back to the desired cooking time.  Further information can be obtained in the manufacturer's instruction manual. Fig. 236 Operating controls (micro- wave oven) ◼...

  • Page 198: Refrigerator

    Appliances 10.6 Refrigerator During the journey, only operate the refrigerator via the 12 V power supply. At high ambient temperatures the refrigerator is unable to reach its full cool- ing power.  When leaving the vehicle, always mount the refrigerator ventilation grill. Otherwise water can enter during rain.
  • Page 199 Appliances Fig. 241 Winter cover If the refrigerator is to be operated at low external temperatures, the manu- Winter cover facturer recommends the use of a winter cover (Fig. 241) for the refrigerator ventilation grills. The table below shows the temperature ranges in which the winter cover or the insulated winter cover may be used.

  • Page 200: Thetford N3000 E/A

    Appliances 10.6.2 Thetford N3000 E/A Depending on the equipment, different versions of the refrigerator will be installed. Thetford N3000 E model Manual power selection, automatic ignition Thetford N3000E+/ Automatic and manual power selection, automatic ignition N3000 A model Operating modes The refrigerator has 3 operating modes: ⚫...
  • Page 201 Appliances Stop to fill tank  Open flames are prohibited at petrol stations. If the refrigerator was manually set for gas operation during the jour- ney: switch off the refrigerator in the petrol station area or change over to 12 V operation. If the refrigerator was operated in the automatic mode during the journey (only in the case of the version with automatic power selec- tion) and the stop for filling the tank takes longer than 15 minutes:...
  • Page 202 Appliances ◼ Selecting operating mode: Press and hold the confirmation button (Fig. 242,3) for about 2 seconds. The operating mode symbols flash. ◼ Manual power selection: use the arrow keys (Fig. 242,2) to select the desired energy source. ◼ Automatic power selection (only version with automatic power selec- tion): use the arrow keys (Fig.

  • Page 203: Dometic Mes/Aes

    Appliances 10.6.3 Dometic MES/AES Depending on the equipment, different versions of the refrigerator will be installed. Version MES Manual power selection, automatic ignition Version AES Automatic and manual power selection, automatic ignition Operating modes The refrigerator has 3 operating modes: ⚫...
  • Page 204 Appliances Stop to fill tank  Open flames are prohibited at petrol stations. If the refrigerator was manually set for gas operation during the jour- ney: Switch off the refrigerator in the petrol station area or change over to 12 V operation. If the refrigerator was operated in the automatic mode during the journey (only in the case of the AES version) and the stop for filling the tank takes longer than 15 minutes: switch off the refrigerator.
  • Page 205 Appliances In the case of the AES version, the automatic energy selection is carried out in the following order as a function of the availability of the energy sources: ⚫ 12 V solar (special equipment) ⚫ 230 V AC ⚫ 12 V DC ⚫...

  • Page 206: Refrigerator Door Locking Mechanism

    Appliances Additional functions If, after switching on or after setting, no further button is pressed, the bright- ness of the display is reduced after a few seconds. When pressing a button, the display will light up again. By pressing again, the desired function is acti- vated.
  • Page 207 Appliances Thetford The refrigerator is opened and closed with the handle on the door. ◼ Opening: Press the handle to the side, keep it pressed and open the refrigerator door. ◼ Closing: Close the refrigerator door. The lock hook engages audibly. The refrigerator door may be locked in ventilation position with a swivelling Ventilation position bracket.
  • Page 208 Appliances Dometic 9 series The refrigerator is opened and closed with the handle (Fig. 246,1) on the door. Fig. 246 Refrigerator door handle Ventilation position The refrigerator door may be locked in ventilation position with a swivelling bracket. Fig. 247 Locking device in normal po- Fig.

  • Page 209: Sanitary Fittings

    Sanitary fittings Sanitar y fittings Chapter overview This chapter contains instructions regarding the sanitary fittings of the vehi- cle. 11.1 Water supply, general  Fill water tank from supply systems that have been verified to provide drinking water quality.  Only use such hoses or containers when filling that have been ap- proved for use with drinking water.

  • Page 210: Water System

    Sanitary fittings 11.2 Water system 11.2.1 Water tank  The water tank has a capacity of 125 litres (Lyseo Time I) or 120 litres (Ixeo I). However the volume has been limited to 20 litres (overflow in- stalled) for payload reasons. The panel has not been adjusted to this vol- ume.

  • Page 211: Filling The Water System

    Sanitary fittings Drinking water filler neck in The drinking water filler neck is part of the centralized supply unit (service the service unit unit). The central supply unit is installed behind the service flap on the left- hand side of the vehicle. 11.2.3 Filling the water system ...
  • Page 212 Sanitary fittings Fig. 253 Safety/drainage valve Fig. 254 Filling aid (Truma) ◼ Close the safety/drainage valve (Truma). Turn the knob (Fig. 253,1) per- pendicular to the safety/drainage valve and push the push button (Fig. 253,2) in. If the temperature is below 6 °C, the safety/drainage valve cannot be closed.

  • Page 213: Topping Up The Water

    Sanitary fittings 11.2.4 Topping up the water  When filling the water tank, observe the maximum permissible gross weight of the vehicle. Luggage must be reduced accordingly when the water tank is full. ◼ Open drinking water filler neck. ◼ Fill the water tank with drinking water.

  • Page 214: Draining Water (Rotary Handle With Overflow)

    Sanitary fittings 11.2.6 Draining water (rotary handle with overflow) Fig. 257 Water tank (service unit) Fig. 258 Water tank (alternative) ◼ Turn the rotary handle (Fig. 257,1 or Fig. 258,1) on the water tank in an anticlockwise direction as far as possible beyond the resistance to fully open the drainage opening.
  • Page 215 Sanitary fittings Fig. 259 Drain cock (with rocking Fig. 260 Drain cock (with twist cap) lever) To empty and ventilate the water system, proceed as follows. This will avoid frost damage: ◼ Position the vehicle horizontally. ◼ Switch off water pump on panel. ◼...

  • Page 216: Waste Water Installation

    Sanitary fittings ◼ Blow out the remaining water in the water pipes (max. 0.5 bar). In order to do this, remove the water pipe from the water pump and blow into the water pipe in the direction of the appliances. ◼...

  • Page 217: Heater For Waste Water Tank And Waste Water Pipes (Special Equipment)

    Sanitary fittings Waste water from the kitchen and washing unit flows through plastic pipes into the waste water tank. The drain cock and the cleaning opening are located on the underside of the waste water tank. The position of the drain cock is identified by a symbol (Fig. 262). The waste water tank holds 90 litres.
  • Page 218 Sanitary fittings In order to prevent the waste water installation from freezing, depending on the model and the equipment, the following components of the waste water system can be heated electrically: ⚫ Waste water tank ⚫ Waste water pipes ⚫ Waste water tank and drainage When the respective heater has been switched on, temperature sensors monitor the temperature of the waste water tank and the waste water...

  • Page 219: Toilet Compartment

    Sanitary fittings 11.4 Toilet compartment  Do not transport any loads in the shower tray. The shower tray or other items of equipment in the toilet compartment can be damaged.  For ventilation purposes during or after a shower, and for drying wet clothing, close the toilet compartment door and open the window or the toilet compartment skylight.

  • Page 220: Preparing Toilet

    Sanitary fittings 11.5.1 Preparing toilet  The sewage tank (cassette) can only be taken out if the sliding trap is closed. Fig. 267 Flap for sewage tank Fig. 268 Flap for sewage tank (alter- native) ◼ Open the flap for the sewage tank on the outside of the vehicle. To do this, insert the key into the locking cylinder of the lock (Fig.
  • Page 221 Sanitary fittings Fig. 270 Turning drainage neck Fig. 271 Filling with sanitary liquid ◼ Put the sewage tank down vertically. ◼ Turn the drainage neck upwards. ◼ Remove the cap of the drainage neck. ◼ Fill the stated amount of sanitary liquid into the sewage tank. ◼...

  • Page 222: Swivel Toilet

    Sanitary fittings 11.5.2 Swivel toilet The flushing of the Thetford toilet is fed directly from the water system of the vehicle. The toilet bowl can be moved into the optimal position. Fig. 272 Thetford toilet bowl, Fig. 273 Thetford toilet bowl, swivelling swivelling (alternative) The operating unit is located close to the toilet bowl.

  • Page 223: Emptying The Sewage Tank

    Sanitary fittings 11.5.3 Emptying the sewage tank  The sewage tank can only be taken out if the sliding trap is closed. Fig. 276 Flap for sewage tank Fig. 277 Flap for sewage tank (alter- native) ◼ Slide the slide lever on the toilet bowl in a clockwise direction. The sli- ding trap is closed.

  • Page 224: Odour Transformer For Toilet Compartment (Special Equipment)

    Sanitary fittings 11.5.4 Odour transformer for toilet compartment (special equipment) The toilet compartment can be equipped with an odour transformer. Fig. 279 Odour transformer Components of the odour transformer: ⚫ Holder ⚫ Clip-on attachment ⚫ Tin with odourant  Refill boxes with odourant can be obtained from the service partner. Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 225: Care

    Care Care Chapter overview This chapter contains instructions regarding the care of the vehicle. At the end of the chapter there is a checklist of measures you must carry out if you are not going to use the vehicle for an extended period of time. 12.1 External care 12.1.1...

  • Page 226: Washing The Vehicle

    Care 12.1.3 Washing the vehicle  Never clean the vehicle in the car wash. Water can penetrate the refrig- erator grills, the waste gas vent or the forced ventilations. The vehicle could be damaged. ◼ Wash the vehicle only on a washing site intended for this purpose. ◼...

  • Page 227: Underbody

    Care 12.1.5 Underbody The underbody of the vehicle is partly coated with an age-resistant under- body protection. Should the underbody protection be damaged, repair im- mediately. Do not treat areas coated with underbody protection with spray oil.  Only use products approved by the manufacturer. Our authorised deal- ers and service centres will be happy to advise you.

  • Page 228: Scratch-Resistant Surface (Kitchen Worktop And Table Top) (Special Equipment)

    Care ◼ Wash panel curtains and gathered blinds. When washing observe wash- ing instructions on the product. The sticks may be removed for washing. ◼ Vacuum clean the carpet, if necessary clean with carpet shampoo. ◼ Clean PVC-floor covering with a mild, soapy cleaning agent for PVC floors.

  • Page 229: Water System

    Care 12.3 Water system 12.3.1 Cleaning the water tank Fig. 280 Cleaning opening of the wa- Fig. 281 Cleaning opening of the wa- ter tank ter tank (service unit) ◼ Empty the water tank and close the drainage opening. ◼ Remove the cap (Fig.

  • Page 230: Disinfecting The Water System

    Care ◼ Close the drain cocks. ◼ Set all the water taps to "Hot" and open them. ◼ Leave the water taps open until the mixture of water and cleaning agent has reached the drain. ◼ Set all water taps to "Cold" and open them. ◼...

  • Page 231: Extractor Hood

    Care ◼ Thoroughly rinse out the waste water tank with fresh water. ◼ If possible, clean waste water sensors through the cleaning opening by hand. 12.4 Extractor hood Clean the extractor hood filter occasionally. How often cleaning is necessary depends on how often the extractor hood is used. Do not wait to clean the filter until the performance of the extractor hood has noticeably decreased.

  • Page 232: Telair

    Care 12.5.2 Telair Every now and then clean the filter and the ventilation grilles on the outside of the housing. How often cleaning is necessary depends on how often the air conditioning unit is used. Do not wait to clean the filter and the ventila- tion grill until the performance of the air conditioning unit has noticeably de- creased.

  • Page 233: Winter Operation

    Care 12.6.2 Winter operation During winter operation, condensation develops when the vehicle is occu- pied under low-temperature conditions. To ensure good interior air quality and avoid vehicle damage from condensation, sufficient ventilation is essen- tial. ◼ When heating the vehicle, the heater should be at the highest setting and roof storage cabinets, curtains and blinds should be opened.
  • Page 234 Care Before laying up the vehicle, go through the following checklist: Activity Done Base vehicle Completely fill fuel tank. This prevents corrosion damage within the fuel tank system Jack up vehicle so that the wheels do not bear any load, or move vehi- cle every 4 weeks.

  • Page 235: Winter Lay-Up

    Care 12.7.2 Winter lay-up Additional measures are required if laying up the vehicle over winter: Activity Done Base vehicle Clean body and underbody thoroughly and spray with hot wax or pro- tect with varnish Fill fuel tank with winter diesel Check antifreeze in the cooling water Rectify damage to the paintwork Fill in windscreen washer fluid with frost protection...

  • Page 236: Starting Up The Vehicle After A Temporary Lay-Up Or After Lay-Up Over Winter

    Care 12.7.3 Starting up the vehicle after a temporary lay-up or after lay-up over winter Go through the following checklist before start-up: Activity Done Base vehicle Check the tyre pressure on all tyres Check the tyre pressure of the spare wheel (if present) Body Check the functioning of the fitted supports Check that the doors, windows and skylights are working properly...

  • Page 237: Maintenance

    Maintenance Maint enance Chapter overview This chapter contains instructions about official inspections and inspection and maintenance work in the vehicle. At the end of the chapter you will find important instructions on how to ob- tain spare parts. 13.1 Official inspections Depending on the national legislative provisions, the following official inspec- tions must be carried out periodically: ⚫...

  • Page 238: Maintenance Work

    Maintenance 13.3 Maintenance work As with every machine, this vehicle requires maintenance. The extent and frequency of the maintenance work required depend on conditions of opera- tion and use. More difficult operating conditions make it necessary to service the vehicle more often. Have the base vehicle and the appliances serviced at the intervals specified in the corresponding instruction manuals.

  • Page 239: Checking The Fluid Level

    Maintenance 13.6.1 Checking the fluid level Fig. 283 Compensator reservoir without panel ◼ Switch off the hot-water heater and allow it to cool down. ◼ Check if the fluid level is between the marks "MIN" (Fig. 283,3) and "MAX" (Fig. 283,2) on the compensator reservoir (Fig. 283). 13.6.2 Topping up heating fluid ◼...

  • Page 240: Bleeding The Heating System

    Maintenance 13.6.3 Bleeding the heating system Fig. 284 Bleeding valve of hot-water heater The bleeding valves are built in nearby the radiators. ◼ Switch off the hot-water heater and allow it to cool down. ◼ Open bleeding valve (Fig. 284,1) and leave open until no more air es- capes.
  • Page 241 Maintenance Types of bulbs Different types of bulbs are used in the vehicle. Below, we have described how to change the different types of bulbs. Fig. 285 Types of bulbs Pos. in Fixture type/bulb Changing Fig. 285 type Plug-in fixture To remove, pull out the bulb To mount, push the bulb into the socket with gentle pressure...

  • Page 242: Front Lights (Lyseo Time I)

    Maintenance 13.7.1 Front lights (Lyseo Time I) Low beam Main beam Daytime running light (LED) Direction indicator Fig. 286 Front lights Daytime running light The lights have LEDs. To change the LEDs, contact an authorised dealer or a service centre. Low beam, main beam, The bulbs are changed in the engine compartment.

  • Page 243: Front Lights (Ixeo I)

    Maintenance 13.7.2 Front lights (Ixeo I) Fog light (optional) Daytime running light (LED) Direction indicator Low beam/main beam Fig. 288 Front lights Low beam/main beam The bulbs are changed in the engine compartment. Fig. 289 Low beam/main beam/park- ing light ◼...
  • Page 244 Maintenance Direction indicator The bulbs are changed in the engine compartment. Fig. 290 Direction indicator ◼ Open the bonnet (see chapter 5). ◼ Put your hand behind the lamp holder (Fig. 290,1). ◼ Turn the lamp holder with the lamp in an anticlockwise direction and remove.

  • Page 245: Rear Lights (Lyseo Time I)

    Maintenance 13.7.3 Rear lights (Lyseo Time I) Housing screws Rear light Brake light Direction indicator Reverse light Fog tail light Fig. 292 Rear lights ◼ Undo the housing screws (Fig. 292,1). ◼ Remove the housing. ◼ Remove bulb. ◼ Put in a new bulb. ◼...

  • Page 246: Side Lights

    Maintenance The rear lights are equipped with LEDs. To change the LEDs, contact an au- thorised dealer or a service centre. 13.7.5 Side lights Side marker light Marker light Direction indicator Fig. 295 Side lights Side marker light The side marker light (Fig. 295,1) is fixed in the rear area at the top. ...

  • Page 247: Replacing Bulbs, Internal

    Maintenance 13.8 Replacing bulbs, internal  Bulbs and light fittings can be extremely hot. Therefore, allow lights to cool down before changing bulbs.  Shut off the power supply on the safety cut-out in the 230 V fuse box before changing bulbs. ...

  • Page 248: Surface Mounted Light

    Maintenance 13.8.2 Surface mounted light Fig. 297 Surface mounted light Halogen bulb 12 V/16 W ◼ Changing bulbs: Pull transparent cover (Fig. 297,1) slightly away from switch and remove ◼ Remove halogen bulb. ◼ Put in a new halogen bulb. ◼...

  • Page 249: Spare Parts

    Maintenance 13.9 Spare parts  Every alteration of the original condition of the vehicle can alter road behaviour and jeopardize road safety.  The special equipment and original spare parts recommended by us have been specially developed and supplied for your vehicle. These products are available at the authorised dealer or service centre.

  • Page 250: Vehicle Identification Plate

    Maintenance 13.10 Vehicle identification plate Chassis number Fig. 299 Vehicle identification plate The vehicle identification plate with the chassis number is located inside in the entrance area. Do not remove the vehicle identification plate (Fig. 299). The vehicle identifi- cation plate: ⚫...

  • Page 251: Wheels And Tyres

    Wheels and tyres Wheels and tyres Chapter overview This chapter contains instructions regarding the tyres of the vehicle. At the end of the chapter there is a table you can use to find the correct tyre pressure for your vehicle. 14.1 General ...

  • Page 252: Tyre Selection

    Wheels and tyres Fig. 300 Tighten the wheel nuts or wheel bolts cross-wise ◼ Check regularly that the wheel nuts or wheel bolts are firmly seated. Re- tighten the wheel nuts or wheel bolts of a changed wheel after 50 km (30 miles) (Fig.

  • Page 253: Tyre Specifications

    Wheels and tyres 14.3 Tyre specifications Description Explanation 215/70 R 15C Tyre width in mm 109/107 Q (example) Height-to-width proportion in percent Tyre design (R = radial) Rim diameter in inches Commercial (transporter) Load index code for single tyres Load index code for twin tyres Speed index (Q = 160 km/h) 14.4 Handling of tyres...
  • Page 254 Wheels and tyres  Never overload the vehicle jack. The maximum permissible load is specified on the vehicle jack's identification plate.  Use the vehicle jack only for lifting the vehicle briefly while changing the tyre.  No persons may be in the vehicle while it is is raised. ...

  • Page 255: Tightening Torque

    Wheels and tyres 14.5.2 Tightening torque Depending on the wheel rim type and the wheel manufacturer, the wheels must be tightened with different tightening torques. Description Tightening torque Steel wheel rims 15" Fiat/Citroen Light 170 Nm 16" Fiat/Citroen Light 170 Nm 16"...

  • Page 256: Changing A Wheel

    Wheels and tyres 14.5.3 Changing a wheel  The footplate of the vehicle jack must be levelly positioned on the ground.  Do not tilt the vehicle jack.  The wheel you have replaced should be repaired immediately.  Take note of the general instructions in this chapter. Fig.

  • Page 257: Tyre Pressure

    Wheels and tyres 14.6 Tyre pressure  Tyres overheat if the tyre pressure is too low. This can cause serious tyre damage.  Check tyre pressure before a journey or every 2 weeks. Wrong tyre pressure causes excessive wear and can lead to damage or even to tyre burst.
  • Page 258 Wheels and tyres Description Rim type Type of Air pressure in tyres Front Rear 15" Fiat/Citroen Light Steel wheel rim 16" Fiat/Citroen Light Steel wheel rim 16" Fiat/Citroen Light Alloy wheel rim 16" Fiat/Citroen Maxi Steel wheel rim 16" Fiat/Citroen Maxi Alloy wheel rim 16"...

  • Page 259: Troubleshooting

    Troubleshooting Troubles hooti ng Chapter overview This chapter contains instructions about possible faults in your vehicle. The faults are listed with their possible causes and corresponding remedies. The specified faults can be remedied with relative ease and without a great deal of specialised knowledge.

  • Page 260: Electrical System

    Troubleshooting Fault Cause Remedy The satellite unit cannot be The vehicle engine is Switch the vehicle engine of switched on running Remote control bat- Change the battery tery is empty Fuse on the supply Replace fuse cable is damaged Further faults can occur, which are shown by an error code on the display of the operating panel.
  • Page 261 Troubleshooting Fault Cause Remedy Living area battery is not Fuse on terminal D+ of Replace fuse charged during vehicle the alternator is defec- operation tive Disconnector relay in the Contact customer service transformer/rectifier is defective 12 V indicator lamp does 12 V power supply is Switch 12 V power supply on not light up...
  • Page 262 Troubleshooting Fault Cause Remedy 230 V indicator lamp The mains connection is Check external mains does not light up even de-energised connection though 230 V mains 230 V automatic circuit Reset 230 V automatic cir- supply is connected breaker upstream of cuit breaker transformer/rectifier has tripped or is switched off...

  • Page 263: Gas System

    Troubleshooting 15.5 Gas system  In case of a defect of the gas system (gas odour, high gas consump- tion) there is danger of explosion! Close regulator tap on the gas bottle immediately. Open doors and windows and ventilate well. ...
  • Page 264 Troubleshooting Fault Cause Remedy Fault with error code is See table "Fault search in- See table "Fault search in- displayed struction" struction" Boiler empties, Internal temperature be- Heat inside low 8 °C safety/drainage valve has opened Safety/drainage valve Temperature at sa- Heat inside cannot be closed fety/drainage valve below...

  • Page 265: Alde Heater/Boiler

    Troubleshooting Error code Cause Rectification #112, #202, Lack of gas Open regulator tap and gas isolator tap #121, #211 Connect a full gas bottle #122, #212 Combustion air inlet or Check openings for dirt (slush, ice, leaves exhaust gas outlet etc.) and clean if necessary closed #255...

  • Page 266: Air Conditioning Unit

    Troubleshooting 15.7 Air conditioning unit 15.7.1 Truma Fault Cause Remedy Air conditioning unit does No 230 V power supply Connect the vehicle to the not start up local power supply 230 V automatic circuit Switch on 230 V auto- breaker has triggered matic circuit breaker Remote control is not Remote control batteries...

  • Page 267: Telair

    Troubleshooting 15.7.2 Telair Fault Cause Remedy Air conditioning unit does No 230 V power supply Connect 230 V power not start up supply 230 V automatic circuit Switch on 230 V auto- breaker has triggered matic circuit breaker Remote control batteries Change batteries empty (2 x AAA)

  • Page 268: Extractor Hood

    Troubleshooting 15.8.2 Extractor hood Fault Cause Remedy Extractor hood does not 230 V automatic circuit Switch on 230 V auto- work breaker is switched off matic circuit breaker Fuse (15 A) at the trans- Replace fuse (15 A) former/rectifier is defec- tive Extractor hood is defec- Contact customer service...
  • Page 269 Troubleshooting Fault Cause Remedy Refrigerator does not re- Insufficient ventilation of Check if ventilation grills frigerate sufficiently unit are covered; remove co- vers if necessary Remove ventilation grills and clean the space be- hind them (of leaves etc.) Thermostat adjusted too Adjust higher value on thermostat Post evaporator heavily...

  • Page 270: Thetford N 3000 E/A

    Troubleshooting 15.9.2 Thetford N 3000 E/A For certain faults, indicators also flash on the operating panel. Fault Cause Remedy LEDs for types of energy Refrigerator does not Switch the refrigerator off and display of the temper- work and on again ature range flash Check availability of an energy source...

  • Page 271: Dometic Mes/Aes

    Troubleshooting 15.9.3 Dometic MES/AES In addition to the faults mentioned in section 15.9.1, the following faults can be indicated via light symbols on the Dometic refrigerator.  In the event of a fault, the illuminated Fault button will flash. Also, either one of the illuminated buttons for operating mode or the cooling level in- dicator will flash.

  • Page 272: Water Supply

    Troubleshooting 15.10 Water supply Fault Cause Remedy Leakage water inside the A leak has occurred Identify leak, re-connect vehicle water pipes No water Water tank is empty Replenish drinking water Drain cock not closed Close drain cock 12 V power supply is Switch 12 V power supply switched off Fuse of the water pump is...
  • Page 273 Troubleshooting Fault Cause Remedy Any change in the taste or Tank filled with dirty wa- Clean water system me- odour of the water chanically and chemically; then disinfect and rinse copiously with drinking water Fuel filled into the water Clean water system me- tank by mistake chanically and chemically;...

  • Page 274: Body

    Troubleshooting 15.11 Body Fault Cause Remedy Flap hinges/door hinges Flap/door hinges are not Lubricate flap hinges/door are difficult to operate (sufficiently) lubricated hinges with acid-free and resin-free grease Hinges/joints in the bath- Hinges/joints are not (suf- Lubricate hinges/joints room unit/toilet compart- ficiently) lubricated with solvent-free and ment are difficult to oper-...

  • Page 275: Special Equipment

    Special equipment Special equipm ent 16.1 Weight details for special equipment  The use of accessories, parts and fittings not supplied by us may cause damage to the vehicle and jeopardize road safety. Even if an expert's report, a general type approval or a design certification exists, there is no guarantee for the proper quality of the product.
  • Page 276 Special equipment Item designation Surplus weight (kg) Garage door, left Gas alarm system Rear storage space shelf system Alde heater (hot water) Truma Combi 6 E heater Pull-down bed, electrically adjustable ISOFIX child safety seat mounting system Driver's cabin air conditioning unit Air conditioning unit (Telair) Air conditioning unit (Truma) Fuel tank 120 l...

  • Page 277: Technical Data

    Technical data Technical data 17.1 View of ground plans ⚫ Explanations (1) 230 V fuse ⚫ (2) Transformer/rectifier with 12 V fuses ⚫ (3) Living area battery with main fuse ⚫ (4) Water pump mounted in the tank area ⚫ (5) Drain cock, waste water tank ⚫...
  • Page 278 Technical data Fig. 309 Ground plan I 728 G Fig. 310 Ground plan I 734 G Ixeo I Fig. 311 Ground plan I 690 G Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...
  • Page 279 Technical data Fig. 312 Ground plan I 700 Fig. 313 Ground plan I 720 Fig. 314 Ground plan I 727 G Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...
  • Page 280 Technical data Fig. 315 Ground plan I 728 G Fig. 316 Ground plan I 729 Fig. 317 Ground plan I 736 Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 281: Table Of Linear Measures / Sleeping Places

    Technical data Fig. 318 Ground plan I 744 Fig. 319 Ground plan I 746 17.2 Table of linear measures / sleeping places Type Headroom Total length Body width Overall Regular/ad- in cm in cm in cm height with- ditional out antenna sleeping in cm places...
  • Page 282 Technical data Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 283: Helpful Notes

    Helpful notes Helpful notes Chapter overview This chapter contains helpful tips for the journey. At the end of the chapter there is a checklist containing the most important equipment for the journey. 18.1 Traffic rules in foreign countries  The vehicle driver is required to inform himself as to the traffic rules of the countries in which he plans to travel before beginning the trip.

  • Page 284: Gas Supply In European Countries

    Helpful notes 18.3 Gas supply in European countries  In Europe, there are several different connection systems for gas bottles. It is not always possible to fill or exchange your gas bottles in a foreign country. Get information about the connection system in the country you are travelling to before embarking on your journey, e.g.

  • Page 285: Tips On Staying Overnight Safely During Travel

    Helpful notes 18.5 Tips on staying overnight safely during travel Prudent behaviour is the most important protective measure for insuring a safe night in the motorhome. The risk of thievery is reduced to a minimum when the following basic rules are observed: ⚫...

  • Page 286: Travel Checklists

    Helpful notes 18.7 Travel checklists The following checklists will help that nothing important is left at home alt- hough not everything on the checklists might be necessary.  Do not leave checking of documents (e.g. vehicle papers and infor- mation) as well as checking the condition of the vehicle until just before commencing the trip.
  • Page 287 Helpful notes Object Object Object Vehicle/tools Waste water contai- Gas tube Snow chains (win- ter) Adapter socket Fabric tape Screwdriver CEE adapter Watering can for Current-measuring drinking water instrument Wire Cable reel Wheel chocks Spare wheel Glue First-aid kit Spare lamps Universal pliers Vehicle jack Spare fuses...
  • Page 288 Helpful notes Lyseo Time I / Ixeo I - 19/20 - Ausgabe 09/19 - 3137742 -EHG-0018-01EN...

  • Page 289: Inspection Plan

    Inspection plan Inspecti on plan Pos. Component Activity Interval Auxiliary support Lubrication Annually Tyres and wheel rims Air pressure check (see section 14.6). Annually Visual check for damage Outside lighting Function check Annually Joints, hinges Lubrication Annually Refrigerator, heater, boiler, Function check Annually cooker, lighting, flap and...
  • Page 290 Inspection plan Delivery __________ Item 1-13 Stamp of the Bürstner dealer Date Signature 1st year __________ Item 1-13 2nd year __________ Item 1-16 Stamp of the Bürstner dealer Stamp of the Bürstner dealer Date Signature Date Signature 3rd year __________ Item 1-13 4th year __________ Item 1-16 Stamp of the Bürstner dealer Stamp of the Bürstner dealer...
  • Page 291 Index Index 12 V fuses ............... 157 Switching on ............. 187 For electrical pull-down bed ......160 Timer ................189 For Thetford toilet ........159, 160 Troubleshooting ............266 Heater for waste water pipes ......160 Air outlet nozzles, adjustment ........ 171 On the living area battery ........
  • Page 292 Index Braking system, troubleshooting ......259 Windows ..............226 Branch block ..............55 Winter lay-up ............235 Breakdown services in Europe .........283 Carpet, cleaning ............228 Bulbs, changing Central locking system ..........73 Exterior lighting ............240 Remote control ............73 Front lights ............. 242, 243 Changing wheels ............
  • Page 293 Index Danger of suffocation ..........18, 92 Electrical system Daytime running light ........242, 244 230 V connection, troubleshooting: ....260 Dimensions see table of linear measures ... 281 Explanation of terms..........133 Direction indicator ..........244, 246 Lighting, troubleshooting ........260 Bulb, changing ............
  • Page 294 Index Service flap ..............81 Gas isolator taps ............126 Square ................81 Symbols ............126, 169 With recessed handle ..........78 Gas odour ............21, 123, 263 Flashing indicator see direction indicator ...246 Gas oven ................194 Flat screen ................. 91 Switching off ............
  • Page 295 Index Hot-air heater ..............171 Inspections ..............237 Circulation fan ............171 Inspections, official............237 Operating modes ........... 175 Interior care ..............227 Operating unit ............172 Interior lighting, bulbs, changing ......247 Position ..............277 Interior lighting, troubleshooting ......260 Troubleshooting .............
  • Page 296 Index Lock Conversion door ............76 Panel (LT 633) ............... 149 Driver's door ............... 75 Battery alarm ............151 External flap ..........78, 79, 81 Battery values, displaying ........150 Furniture flap .............. 83 Connection diagram ..........166 Low beam ................243 Gas reserve, displaying ........
  • Page 297 Index Refrigerator ............. 67, 198 Satellite unit ............... 67, 69 Change-over between Troubleshooting ............259 energy sources ..........200, 203 With automatic antenna alignment ....69 Door lock ..............206 With manual satellite selection......68 Frame heater ............205 Scratch-resistant surface, care ......228 Operating modes .........
  • Page 298 Index Sliding window ..............96 Closing ................96 Table of linear measures ........... 281 Opening ................ 96 Table with pillar table leg Sliding window, front passenger window....96 Table top, rotating ..........105 Closing ................96 Table top, shifting ..........105 Opening ................
  • Page 299 Index Gas system ............... 263 Heater ................ 263 Wardrobe light ..............89 Hot-air heater ............263 Warning stickers ............250 Inner door ..............274 Washer nozzles, setting ..........61 Lighting ..............260 Washing with a high-pressure cleaner ....225 Living area battery ..........260 Waste gas vent on the right hand Microwave oven .............
  • Page 300 Index Windows................93 Opening ..............101 Insect screen .............. 97 Roman shade ............101 Roman shade ............. 97 Troubleshooting ............. 274 Windows, cleaning ............226 Winter care ..............232 Windscreen washer fluid, filling in ......61 Winter operation ............233 Wind-up skylight ............101 Work top, cleaning ............

Table of Contents

Save PDF