Burstner Goldie Manual
  1. Manuals
  2. Brands
  3. Burstner Manuals
  4. Motorhomes
  5. Goldie
  6. Manual
Burstner Goldie Manual

Burstner Goldie Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction manual
Dear Reader ...
Instruction manual
We would like to congratulate you on the purchase of your new Bürstner motorhome. You have selected a top-
quality vehicle which will afford you many years of enjoyment.
To enable you to always use and operate your motorhome properly and easily, your Bürstner dealer will first
provide you detailed instructions for all important functions when you take delivery.
This manual, the instruction manuals from the base vehicle manufacturer as well as the instruction manuals
from the appliance manufacturer will always be at hand to answer any questions you may have regarding your
motorhome.
Before your first journey
Please familiarise yourself with this manual rather than relying on it strictly for reference.
Fill in the warranty cards for the appliances and special equipment in the individual instructions and send these
cards to the respective manufacturers. This ensures your warranty claim for each appliance.
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Goldie and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Burstner Goldie

Summary of Contents for Burstner Goldie

  • Page 1 Instruction manual Dear Reader ... Instruction manual We would like to congratulate you on the purchase of your new Bürstner motorhome. You have selected a top- quality vehicle which will afford you many years of enjoyment. To enable you to always use and operate your motorhome properly and easily, your Bürstner dealer will first provide you detailed instructions for all important functions when you take delivery.
  • Page 2 Instruction manual I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 3: Table Of Contents

    Contents Introduction 4.8.4 Adjusting the armrest ....36 ....7 Headrests .
  • Page 4 Contents 6.2.5 Cap for the fresh water filler neck ..54 8.4.1 Battery cut-off switch ....88 Furniture flaps ....54 8.4.2 Battery selector switch .
  • Page 5 Contents 9.2.7 Independent vehicle heater 11.2 Interior care ....163 (special equipment)....119 11.3 Extractor hood .
  • Page 6 Contents 13.6.2 Spare wheel support in the rear garage ......188 13.7 Tyre pressure....188 Troubleshooting .

  • Page 7: Introduction

    Introduction Please read this instruction manual completely before 1Introduction using the vehicle for the first time! Always keep this instruction manual in the vehicle. Also inform all other users of the safety regulations. The non-observance of this symbol can lead to personal injury. The non-observance of this symbol can lead to damage being caused to, or inside the vehicle.

  • Page 8: Environmental Tips

    Introduction Only use the vehicle in a technically impeccable condition. Follow the instruc- tions in the instruction manual. Malfunctions which impair the safety of persons or the vehicle should be immediately remedied by qualified personnel. Have the vehicle's braking and gas systems inspected and repaired by an authorised specialist workshop only.

  • Page 9: Safety

    Safety Chapter overview 2Safety This chapter contains important safety instructions. The safety instructions are for the protection of persons and property. The instructions address the following topics: fire prevention and what to do in case of fire general care of the vehicle road safety of the vehicle towing gas system of the vehicle...

  • Page 10: General

    Safety General The oxygen in the vehicle interior is used up by breathing or the use of the gas cooker or other appliances. That is why the oxygen needs to be replaced on a constant basis. For this purpose, forced ventilation options (skylights with forced ventilation or mushroom-shaped vents) are fitted to the vehicle.
  • Page 11 Safety Before commencing the journey, turn the flat screen and the screen holder back to the basic position and slide them in until they lock into place. Close the TV cabinet. During the journey, the seats are only to be occupied by persons (see chapter 4).

  • Page 12: Towing

    Safety Tyres may not be older than 6 years as the material becomes brittle over time (see chapter 13). When using snow chains, the tyres, wheel suspension and steering are subjected to an additional load. When using snow chains, drive slowly (maximum speed 50 km/h) and only on streets which are completely cov- ered with snow.

  • Page 13: Gas Bottles

    Safety The built-in gas devices are exclusively meant for use with propane or butane gas or a mixture of both. The gas pressure regulator as well as all built-in gas devices are designed for a gas pressure of 30 mbar. Propane gas is capable of gasification up to -42 °C, whereas butane gas gasifies at 0 °C.

  • Page 14: Electrical System

    Safety Use the shortest possible tube lengths (150 cm max.) for external gas bottles. If aluminium gas bottles are used, never block the floor ventilation open- ings below the gas bottles. Electrical system Only allow qualified personnel to work on the electrical system. Prior to carrying out work on the electrical system, switch off all devices and lights, disconnect the batteries and disconnect the 230 V power cable from the mains.

  • Page 15: Before The Journey

    Before the journey Chapter overview 3Before the journey This chapter contains important information which has to be noted before com- mencing your journey or carrying out any tasks before the journey. The instructions address the following topics: keys registration calculating the payload correct loading of the motorhome and bike rack motorcycle rack towing...

  • Page 16: Terms

    Before the journey Do not exceed the maximum permissible gross weight stated in the vehicle documents by the payload. Built-in accessories, special equipment, the full water tank and the gas bot- tles all reduce the payload. Adhere to the axle load stated in the vehicle documents. On loading, make sure that the payload's centre of gravity is as low as possible (directly above the floor of the vehicle).
  • Page 17 Before the journey The power cables for the 230 V power supply The installation kit for an auxiliary battery if an auxiliary battery can be used The waste water and sewage tanks are empty. Example for calculating Water tank with 120 l 120 kg the basic equipment Gas bottles (2 x 11 kg...

  • Page 18: Calculating The Payload

    Before the journey Radio Clothes Bedding Toys Books Toiletries No matter where kept, personal equipment also includes: Animals Bikes Boats Surfboards Sports equipment For the personal equipment, according to the applicable regulations, the man- ufacturer must use a minimum weight that is determined according to the fol- lowing formula: Formula Minimum weight M (kg) = 10 x N + 10 x L...

  • Page 19: Loading The Motorhome Correctly

    Before the journey The calculation of the payload from the difference between the maximum per- missible gross weight in laden condition and the mass specified by the manu- facturer in ready-to-drive condition is however only a theoretical value. Only if the vehicle is weighed with full tanks (fuel and fresh water), full gas bot- tles and complete additional equipment on a public weighbridge, can the actual payload be determined.
  • Page 20 Before the journey However, the individual axles may not be overloaded under any circum- stances. That is why it is important, at which distance to the axles the load is stored. To distribute the load correctly, you will need a scale, a tape measure, a cal- culator and some time.

  • Page 21: Roof Rail And Ladder (Special Equipment)

    Before the journey 3.3.4 Roof rail and ladder (special equipment) Access the roof only when a roof rail has been fitted. Take care when stepping onto the ladder. There is danger of slipping when the ladder is moist or icy. Take care when stepping onto the roof.

  • Page 22: Rear Garage/Rear Storage Space

    Before the journey 3.3.5 Rear garage/rear storage space Observe the permissible axle loads and maximum permissible gross weight when loading the rear garage/the rear storage space. The maximum permitted load of the rear garage/the rear storage space is 200 kg. Do not exceed the permissible rear axle load. Observe: If the rear garage or (depending on the model) the rear storage space is loaded to its maximum capacity, this will reduce the load on the front axle due to the levering action.
  • Page 23 Before the journey When loading the bike rack, observe the centre of gravity. If the bike rack is only loaded with one bicycle, position the bicycle as closely as possible to the vehicle wall. Driving with a folded out bike rack without bicycles is not permitted. Before every journey, check: Is the bike rack without bicycles folded in correctly? Are the bicycles securely fastened to the bike rack using the bike rack...

  • Page 24: Removable Motorcycle Rack (Special Equipment)

    Before the journey 3.3.8 Removable motorcycle rack (special equipment) Do not exceed the rear axle load. Heavy loads behind the rear axle can reduce the load on the front axle due to the leverage effect ( ). This applies especially to long rear extensions, if a motorbike is transported on the rear carrier or if there is a heavy load in the rear storage space.

  • Page 25: Towing

    Before the journey Towing No persons are to be between the motorhome and the trailer during posi- tioning for connecting and detaching. Observe the permissible nose weight and rear axle load of the motorhome. Nose weight and rear axle load must not be exceeded. The values of the nose weight and rear axle load are included in the docu- ments of the motorhome and the caravan coupling.
  • Page 26 Before the journey Do not step on the entrance step until it has extended completely. There is a risk of injury. Do not under any circumstances raise or lower persons or loads with the entrance step. Take note of the different step heights and make certain that the ground is firm and even when exiting.

  • Page 27: Television (Special Equipment)

    Before the journey Television (special equipment) Before commencing the journey, remove the television from the support and store it securely. Before commencing the journey, turn the flat screen and the screen holder back to the basic position and slide them in until they lock into place.

  • Page 28: Road Safety

    Before the journey The use of snow chains is subject to the legal regulations of the individual countries. Always mount snow chains to the drive wheels. After a few metres, check the tension of the snow chains. 3.10 Road safety Check tyre pressure before a journey or every 2 weeks.
  • Page 29 Before the journey Checks Checked Refrigerator door secured Refrigerator set to 12 V operation All drawers and flaps closed Living area doors and sliding doors secured Pull-down bed fixed to roof with retaining belt pulled tight Children's seats mounted to seats with three-point safety belts Swivel seat locking device for driver's seat and front passen- ger's seat locked Shades in the driver's cabin opened and secured...
  • Page 30 Before the journey I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 31: During The Journey

    During the journey Chapter overview 4During the journey This chapter contains instructions on how to drive the motorhome. The instructions address the following topics: the parking distance control reversing camera with LCD monitor driving speed brakes seat belts child restraint system seats and headrests the backrest adjustment mechanism for the bench the adjustment mechanism of the divan...

  • Page 32: Parking Distance Control (Partially Special Equipment)

    During the journey Parking distance control (partially special equipment) Be particularly careful when driving backwards. Risk of accident and injury. The parking distance control is only an auxiliary appliance and may not necessarily recognise all obstacles. The driver of the vehicle is respon- sible for safety.

  • Page 33: Reversing Camera (Partially Special Equipment)

    During the journey The three different-coloured LEDs (Fig. 11,3) are the second way of dis- playing. The change of the colours from green or yellow to red signalises that an obstacle is coming nearer. In addition to the optical displays, an acoustic signal (sequence of tones) is issued, which changes in relation to the distance.

  • Page 34: Brakes

    During the journey Brakes Have defects on the braking system immediately remedied by an author- ised specialist workshop. Avoid block brakings. Block braking gives the tyres "brake plates" of var- ying strength. This reduces driving comfort. It might even make the tyres unserviceable.

  • Page 35: Child Restraint Systems

    During the journey Child restraint systems When travelling, secure children under 13 years of age that are smaller than 150 cm, with a suitable and officially approved child restraint system. Factory-set three-point safety belts must be used when attaching child restraint systems.

  • Page 36: Rotating The Seat

    During the journey 4.8.2 Rotating the seat Pull the sliding lever (Fig. 14,3) upwards. The seat is released from the locking device. The seats can be rotated in any direction. The seats can only be locked in position in the direction of travel. Return the seat to the direction of travel.

  • Page 37: Divan Adjustment Mechanism (Partially Special Equipment)

    During the journey Fig. 16 Backrest adjustment mecha- nism for bench Pull or press the bar (Fig. 16,1) under the seat (Fig. 16,3) upwards and hold it in this position. Push the seat on the rails (Fig. 16,2) to the desired position or carefully pull it forwards as far as it will go.

  • Page 38: Seating Arrangement

    During the journey 4.12 Seating arrangement During the journey, persons are only to be in the prescribed seats. The authorised number of seats is stipulated in the vehicle documents. In seats which are fitted with seat belts, you have to observe seat belt laws.

  • Page 39: External Mirrors

    During the journey 4.14 External mirrors Fig. 20 External mirrors The vehicle is equipped with two electrically adjustable and heated external mirrors (Fig. 20,1). The switch used to adjust the external mirrors is located on the driver's door. Fig. 21 External mirror adjustment Fig.

  • Page 40: Bonnet

    During the journey Fig. 23 Lock for Roman shade Fig. 24 Roman shade Opening and closing: Grasp the handle (Fig. 24,1) of the Roman shade and slide to the left or the right. Securing: Push the handle (Fig. 23,1) onto the cap. The Roman shade is secured. 4.16 Bonnet When the bonnet is open, there is a risk of injury in the engine compart-...

  • Page 41: Washer Nozzles

    During the journey 4.17 Washer nozzles Fig. 27 Washer nozzle The motorhome has washer nozzles with an adjustable angle of spray. Adjusting: Use a suitable screwdriver to turn the adjusting screw (Fig. 27,1) until you reach the desired position. 4.18 Filliing with washer fluid Fig.

  • Page 42: Filling Up With Diesel

    During the journey 4.19 Filling up with diesel No source of combustion using gas (gas cooker, gas heater, gas boiler, etc.) may be in operation when filling the fuel tank, on ferries or in the garage. Danger of explosion! The cap for the fuel filler neck and for the fresh water filler neck are very similar.

  • Page 43: Pitching The Motorhome

    Pitching the motorhome Chapter overview 5Pitching the motorhome This chapter contains instructions on how to pitch the motorhome. The instructions address the following topics: handbrake wheel chocks operation of the supports entrance step 230 V connection refrigerator aligning the antenna retracting and extending the awning Pitch the vehicle so that it is as horizontal as possible.

  • Page 44: Entrance Step

    Pitching the motorhome Fig. 30 Steady leg Extending: Place the socket spanner on the hexagon nut (Fig. 30,1) and rotate until the steady leg is in a perpendicular downward position. Remove the splint (Fig. 30,4) out of the support foot extension (Fig. 30,5). Extend the support foot extension until it has reached the required length.

  • Page 45: Satellite Unit (Special Equipment)

    Pitching the motorhome Satellite unit (special equipment) Before commencing the journey, ensure that the antenna is in park posi- tion. Danger of accidents! The vehicle must be still during the satellite search. Do not walk through the vehicle. Satellite reception is only possible, when the antenna is positioned in direct line of sight of the chosen satellite and the view is not blocked in any way.

  • Page 46: Awning (Special Equipment)

    Pitching the motorhome Awning (special equipment) Retract the awning in strong wind, rain or snow. In the case of light rain, shorten one of the support legs so that water can run off. Only retract the awning when the fabric is dry. When the awning must be retracted while the fabric is still wet: Extend the awning as soon as pos- sible, in order to dry out the fabric.

  • Page 47: Living

    Living Chapter overview 6Living This chapter contains instructions about living in the motorhome. The instructions address the following topics: opening and closing the doors and external flaps light switches adjusting the halogen spotlights positioning the television ventilation of the vehicle opening and closing the windows and blinds opening and closing the Roman shades in the driver's cabin opening and closing the skylights...

  • Page 48: Driver's Door, Inside (Partially Special Equipment)

    Living 6.1.2 Driver's door, inside (partially special equipment) Fig. 33 Door lock of driver's door, inside Opening: Pull the door opening lever (Fig. 33,1). When this is done, the safety knob (Fig. 33,2) is automatically pressed upwards and the door lock is unlatched.

  • Page 49: Conversion Door, Inside

    Living 6.1.4 Conversion door, inside Fig. 35 Door lock of conversion door, inside, locked Opening: Press lever (Fig. 35,2). Locking: Push the sliding trap (Fig. 35,1) down. 6.1.5 Conversion door, outside (Hartal) (special equipment) Fig. 36 Door lock of conversion door, outside Opening: Insert the key into locking cylinder (Fig.

  • Page 50: Conversion Door, Inside (Hartal) (Special Equipment)

    Living 6.1.6 Conversion door, inside (Hartal) (special equipment) Fig. 37 Door lock of conversion door, inside Opening: Pull on the handle (Fig. 37,1). The door lock is unlatched. Locking: Turn the safety knob (Fig. 37,2) in a clockwise direction. 6.1.7 Window of conversion door (Hartal) (special equipment) The conversion door window is fitted with a Roman shade.

  • Page 51: External Flaps

    Living Fig. 39 Insect screen Closing: Pull out the insect screen completely by the bar (Fig. 39,1). Opening: Push the insect screen into its initial position by the bar (Fig. 39,1). External flaps Before commencing the journey, close all external flaps and lock them. To open and close the external flap, open or close all locks that are fitted to the external flap.

  • Page 52: Flap Lock, Elliptical-Shaped

    Living Closing: Firmly close the external flap. Insert key into locking cylinder and turn a quarter turn. The flap lock is locked. Remove the key. 6.2.2 Flap lock, elliptical-shaped During rain, water can penetrate the opened flap lock. Therefore close the lock handle.

  • Page 53: Flap For Thetford Cassette

    Living 6.2.3 Flap for Thetford cassette Fig. 42 Flap for Thetford cassette Opening: Insert key into locking cylinder (Fig. 42,1) of the push-button lock and turn a quarter turn. Remove the key. Press both push-button locks (Fig. 42,2) simultaneously with your thumb and open the flap for the Thetford cassette.

  • Page 54: Cap For The Fresh Water Filler Neck

    Living 6.2.5 Cap for the fresh water filler neck Fig. 44 Cap for the fresh water filler neck The cap for the fresh water filler neck and for the fuel filler neck are very similar. Before filling the tank, always check the label. The fresh water filler neck is labelled with the word "WASSER"...

  • Page 55: Furniture Flaps With Snap Fastener

    Living 6.3.1 Furniture flaps with snap fastener Fig. 45 Furniture flap with snap fas- tener Opening: Press inner part of the lock. The snap fastener jumps out (Fig. 45). Hold snap fastener and open furniture flap. Closing: Press furniture flap shut. Press snap fastener in until it locks.

  • Page 56: Light Switch

    Living Light switch 6.4.1 Entrance area Fig. 47 Light switch Fig. 48 Awning light The entrance area has light switches for the following lamps: Seating group lighting (Fig. 47,1) Awning light (Fig. 47,2 and Fig. 47,3) For models without the light switch (Fig. 47,2) the awning light (Fig. 48) is switched on or off using the rocker switch (Fig.

  • Page 57: Spotlight

    Living Fig. 51 Toilet compartment lighting, light switch in the entrance area Depending on the model, the light switches for the toilet compartment lighting are also located next to the conversion door (Fig. 51,1) of the toilet compart- ment. Fig. 52 Halogen lamp Fig.

  • Page 58: Holder For Flat Screen

    Living The housing can be turned in different directions: To the left and to the right Up and down Shifting: Grasp the holder (Fig. 54,2). Push spotlight along the rail system to desired position. Holder for flat screen Before commencing the journey, turn the flat screen and the screen holder back to the basic position and slide them in until they lock into place.

  • Page 59: Ventilation

    Living Storing away: Turn the flat screen until the release knob (Fig. 56,3) locks into place. If necessary, swivel the holder (Fig. 56,2) in the vertical position (Fig. 56). Ventilation The oxygen in the vehicle interior is used up by breathing or the use of the gas cooker or other appliances.

  • Page 60: Hinged Window With Automatic

    Living 6.8.1 Hinged window with automatic hinges Open the window completely, to release the lock. If the locking device is not released and the window is closed nevertheless, there is the danger of the window breaking due to the massive counter-pressure. When opening the hinged windows, ensure that there are no torsional forces.

  • Page 61: Sliding Window Without Lock

    Living Fig. 61 Catch lever without safety Fig. 62 Catch lever with safety knob in knob in "continuous ventila- "continuous ventilation" posi- tion" position tion Continuous ventilation With the catch lever, the hinged window can be placed in two positions: "Continuous ventilation"...

  • Page 62: Blind And Insect Screen (Variant 1)

    Living Closing: Close the window as far as possible and let the handle lock in place. 6.8.3 Blind and insect screen (variant 1) Open blinds before commencing the journey. When the blinds are closed, vibrations can damage the spring shaft. The windows in the motorhome are fitted with a blind and an insect screen.
  • Page 63 Living Fig. 65 Hinged window Insect screen The insect screen is located in the upper blind box. Closing: Grasp the bottom rod of the insect screen in the centre and pull it down to the bottom rod of the Roman shade. Snap the catch on the bottom rod of the insect screen into the Roman shade.

  • Page 64: Roman Shades For Windscreen, Driver's Window And Front Passenger's Window

    Living 6.8.5 Roman shades for windscreen, driver's window and front passenger's window Fig. 66 Roman shade, driver's cabin window Closing: Grasp the handle (Fig. 66,2) of the Roman shades and draw carefully until the magnetic catch keeps the Roman shades closed. Opening: Using the handle, carefully push back the Roman shades.

  • Page 65: Hinged Skylight

    Living When leaving the vehicle, always close the skylights. 6.9.1 Hinged skylight The hinged skylight may be opened on one side only. Three inclination angles and a ventilation position are available. An extension hook can be found in the entrance area. Fig.

  • Page 66: Wind-Up Skylight

    Living 6.9.2 Wind-up skylight Fig. 69 Wind-up skylight The wind-up skylight can be opened using the manual crank. Opening: Rotate the hand crank (Fig. 69,2) until a resistance can be felt (max. opening angle 70°). Closing: Rotate the hand crank until the wind-up skylight is closed. The wind-up sky- light can be locked after rotating two or three more times.

  • Page 67: Tables

    Living 6.10 Tables 6.10.1 Suspension table with separable support leg Fig. 70 Suspension table with sepa- Fig. 71 Lock rable support leg The suspension table size can be enlarged by swinging out a table-top exten- sion. Extending: Pull the knob (Fig. 70,2) of the lock down and swing out the table-top exten- sion (Fig.
  • Page 68 Living Set down the table. Insert the table-top extension (Fig. 72,1) and secure it with the catch (Fig. 73,1). Lift the table-top slightly and push back as far as possible. Secure the table-top with the catches. Reducing size: Open catches (Fig. 73,1). Slightly lift the front of the table-top and pull out.

  • Page 69: Fixed Table (Extendable Table-Top)

    Living 6.10.3 Fixed table (extendable table-top) Fig. 76 Fixed table (extendable table- top) Extending: Pull the knob (Fig. 76,3) of the lock down and swing out the table-top exten- sion (Fig. 76,2). Reducing size: Swing the table-top extension (Fig. 76,2) under the table-top (Fig. 76,1) until the lock latches in place audibly.

  • Page 70: Beds

    Living Lowering the table-top: Pull the top knob (Fig. 77,4) out and press the table-top (Fig. 77,1) down in the centre until you reach the first limit stop (Fig. 77,7). In the end-point position, the lock audibly snaps into place and the knob returns to its initial position.

  • Page 71: Fixed Bed

    Living Release the retaining belt (Fig. 78,1). With both hands, pull the pull-down bed down as far as it will go. Closing the pull-down bed: Use both hands to push pull-down bed upwards as far as it will go. Secure pull-down bed to the roof by means of the retaining belt (Fig. 78,1). Access ladder Always use the provided access ladder to climb up to the pull-down bed.

  • Page 72: Converting Seating Groups For Sleeping

    Living Opening: Lift the mattress forwards and set it down on the panel. Lift slatted frame. The gas-pressure springs (Fig. 81,1) hold the slatted frame open. Closing: Press the slatted frame downwards against the resistance of the gas-pres- sure spring. If necessary, push the mattress behind the panel.

  • Page 73: Front Bench Seat (Guest Bed)

    Living 6.12.2 Front bench seat (guest bed) 1 Back cushion 2 Seat cushion 3 Table 4 Driver's seat 5 Additional cushion Fig. 85 Prior to conversion Fig. 86 After conversion Turn the driver's seat (Fig. 85,4) and push it all the way forward. Convert the table (Fig.
  • Page 74 Living I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 75: Gas System

    Gas system Chapter overview 7Gas system This chapter contains instructions regarding the gas system of the motorhome. The instructions address the following topics: safety changing the gas bottles gas isolator taps external gas connection automatic switching facility the level indicator The operation of the gas operation appliances of the vehicle is described in chapter 9.

  • Page 76: Gas Bottles

    Gas system The built-in gas devices are exclusively meant for use with propane or butane gas or a mixture of both. The gas pressure regulator as well as all built-in gas devices are designed for a gas pressure of 30 mbar. Propane gas is capable of gasification up to -42 °C, whereas butane gas gasifies at 0 °C.

  • Page 77: Changing Gas Bottles

    Gas system Use the shortest possible tube lengths (150 cm max.) for external gas bottles. If aluminium gas bottles are used, never block the floor ventilation open- ings below the gas bottles. With some models, the gas bottle compartment is located right next to the conversion door.

  • Page 78: Gas Isolator Taps

    Gas system Gas isolator taps 1 Oven 2 Refrigerator 3 Heater/boiler 4 Cooker Fig. 88 Symbols for the gas isolator taps A gas isolator tap (Fig. 88) for every gas device is built into the vehicle. The gas isolator taps can be found under the cooker. External gas connection (special equipment) If the external gas connection is not in use, always close the gas isolator tap.

  • Page 79: Duomatic Switching Facility (Special Equipment)

    Gas system Connect the external gas device to the connection point (Fig. 89,1). Open the gas isolator tap (Fig. 89,2). Duomatic switching facility (special equipment) Do not use the switching facility in closed spaces. Also read the manufacturer's instruction manual. The Duomatic is an automatic switching facility with a remote display for a two- bottle gas system.

  • Page 80: Level Indicator (Special Equipment)

    Gas system Operating modes The Duomatic switching facility has two operating modes: Winter operation "On and heating" Summer operation "On" Putting into operation: Open the regulator taps on the gas bottles (Fig. 90,1 and 4). Use the knob (Fig. 90,6) on the switching regulator (Fig. 90,5) to select the gas bottle which is to be the primary source of gas (primary bottle).
  • Page 81 Gas system The level indicator is designed for standard gas bottles with a full weight of 5 kg or 11 kg. Switch the level indicator to % for other sizes of gas bottle. Before using the % display, you must find the base value for the gas bottle and store it.
  • Page 82 Gas system I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 83: Electrical System

    Electrical system Chapter overview 8Electrical system This chapter contains instructions regarding the electrical system of the motorhome. The instructions address the following topics: safety explanations of terms relating to the battery 12 V power supply starter battery living area battery transformer/rectifier panel solar installation...

  • Page 84: Power Supply

    Electrical system Capacity Capacity refers to the amount of electricity which can be stored in a battery. The capacity of a battery is given in ampere hours (Ah). If a battery possesses a capacity of 90 Ah, then the battery can dispense a current of 1 A for 90 hours or a current of 2 A for 45 hours.

  • Page 85: Living Area Battery

    Electrical system Transformer/rectifier When charging the starter battery with an external charger, proceed as fol- EBL 99 lows: Turn off the vehicle engine. Switch off the 12 V power supply on the panel. The green indicator lamp or the LCD display will go off. Switch off the power supply of the vehicle on the transformer/rectifier.

  • Page 86: Transformer/Rectifier (Ebl 99)

    Electrical system Position See chapter 16. Discharging The living area battery is discharged by the closed circuit current which some electrical appliances continuously require. Total discharge damages the battery. Recharge battery in good time. A completely charged living area battery will be totally discharged via a closed circuit current (inactive appliances): After approximately 9 months with the safety/drainage valve switched off After approximately 1.5 months with the safety/drainage valve switched on...
  • Page 87 Electrical system Fig. 93 Transformer/rectifier (EBL 99) Main supply socket 230 V~ Output: Block 1 - refrigerator Output: Block 2 - alternator D+ Output: Block 4 - heater, safety/drainage valve, basic light (lighting in the entrance area), entrance step Output: Block 3 - panel Output: Block 5 - solar cell (if fitted), spare 2, spare 3, spare 4 Output: Block 6 - solar charge regulator (if fitted) Output: Block 7 - auxiliary charging unit...

  • Page 88: Battery Cut-Off Switch

    Electrical system 8.4.1 Battery cut-off switch When the battery cut-off switch is OFF, the safety/drainage valve opens. The water flows out of the boiler. When the battery cut-off switch is ON again, close the safety/drainage valve of the boiler by hand. Also switch off a refrigerator with automatic power selection system.

  • Page 89: Charging The Battery

    Electrical system Measures: Switch off all electrical appliances that are not absolutely essential at the corresponding switch. If necessary, use the 12 V main switch to switch the 12 V power supply back on for a short while. This is only possible, however, when the battery voltage is above 11 V.
  • Page 90 Electrical system Displays: Push the rocker switch (Fig. 94,13) down: The battery voltage of the starter battery is displayed. Push the rocker switch (Fig. 94,13) up: The battery voltage of the living area battery is displayed. The following tables will help you correctly interpret the battery voltage of the living area battery displayed on the panel IT 994.

  • Page 91: Battery Alarm For The Living Area Battery

    Electrical system Volume of water/waste The V/tank gauge is for the indication of the quantity of water or waste water. water With the V/tank gauge (Fig. 94,1), use the bottom scale. The gauge automat- ically lights up as soon as a switch is pressed. Displays: Push the rocker switch (Fig.

  • Page 92: Current Gauge For Charging/Discharging The Living Area Battery

    Electrical system Displays: Push the rocker switch (Fig. 94,8) up: The internal temperature is dis- played. Push the rocker switch (Fig. 94,8) down: The external temperature is dis- played. 8.5.4 Current gauge for charging/discharging the living area battery The battery current actually flowing is permanently displayed on the current gauge (Fig.

  • Page 93: 12 V Main Switch

    Electrical system 8.5.5 12 V main switch The 12 V main switch (Fig. 94,6) switches the panel and the 12 V power supply of the living area on and off. Exception: Depending on the model, safety/drainage valve, heater, basic light (lighting in the entrance area), entrance step, spare 4 and AES refrigerator remain ready to operate.

  • Page 94: Panel (Dt 220)

    Electrical system Panel (DT 220) 1 Key basic menu 2 Key battery menu 3 Key setting menu 4 Key for switching to the next value or for increasing a selected value 5 Key for switching back to the last value or for decreasing a selected value 6 Key for confirming settings or for changing over...

  • Page 95: Lcd Display

    Electrical system 8.6.2 LCD display Fig. 96 Symbol representation in the LCD display Starter battery/living area battery/internal temperature External temperature Main display Information line Unit field Arrows Defroster (optional) Reserve bottle in operation (optional) 230 V power supply is connected 10 Tank heater (optional) 11 Optical display for buzzer (warning that buzzer is switched off) 12 Display for defects to battery, tank level sensors or temperature sensors...

  • Page 96: Battery Menu

    Electrical system Heater for waste water tank (Fig. 96,10) (optional): The symbol appears if the heater for the waste water tank is switched on. Water pump (Fig. 96,13): The symbol appears if the water pump is switched on. Press the basic menu key repeatedly or the "+" key (Fig. 95,4) to call up the following information in succession: Internal temperature in °C External temperature in °C...

  • Page 97: Battery Alarm For The Living Area Battery

    Electrical system Charging current for the living area battery (A) Voltage of the living area battery (V) Voltage of the starter battery (V) Charging current of a solar installation for the living area battery Charging current of a solar installation for the starter battery The functions for a solar installation are only present if the vehicle is equipped for it.

  • Page 98: Battery Capacity Alarm For The Living Area Battery

    Electrical system Total discharge damages the battery. If the battery voltage falls below 10.5 V, the battery monitor in the trans- former/rectifier switches off all of the 12 V appliances, excluding the safety/ drainage valve. Measures: When the battery alarm comes on, switch off the appliances and com- pletely charge the living area battery, either by mobile operation or by con- nection to a 230 V power supply.

  • Page 99: Solar Installation (Special Equipment)

    Electrical system Fill the water tank or empty the waste water tank in the event of tank alarm (see chapter 10). When keys are pressed the LCD display is lit automatically. Activating or deactivating Press the tank menu key (Fig. 95,9). the tank alarm: Press the settings menu key (Fig.

  • Page 100: Power Supply

    Electrical system The green LED goes on The module generates energy The green LED flashes The controller limits the charging cur- rent The multi-colour LED lights green Voltage is 12.8 V The multi-colour LED lights up yellow to Voltage is 12.3 V red-yellow The multi-colour LED lights red Voltage is 11.8 V...

  • Page 101: Fuses

    Electrical system Connection possibilities For your power cable, Bürstner recommends using a CEE connection cable with a CEE plug and coupling. If this type of connection is not feasible, Bürstner recommends the following combination with a safety plug: Fig. 98 Connection possibilities 230 V Fig.
  • Page 102 Electrical system An intact 12 V fuse can be detected by the unbroken fuse element (Fig. 100,1). If the fuse element is broken (Fig. 100,2), change the fuse. Before changing fuses, take the function, value and colour of the relevant fuses from the following specifications.
  • Page 103 Electrical system Function Value/colour Fuses on the Heater 10 A red transformer/rectifier Basic light/electrically operated entrance step/radio 25 A white (EBL 99) Spare 4 25 A white Spare 3 25 A white Spare 2 15 A blue Spare 1 15 A blue Solar 15 A blue Spare 5...

  • Page 104: Fuse

    Electrical system Thetford toilet fuse (fixed The fuse is located in the locker wall of the Thetford cassette. seat) 1 Flat fuse 3 A/purple Fig. 104 Fuse for the Thetford toilet Changing: Open the flap for the Thetford cassette on the outside of the vehicle. Remove the Thetford cassette and swing out the flap in the housing panel.

  • Page 105: External Socket (Special Equipment)

    Electrical system 8.10 External socket (special equipment) 1 SAT socket 2 230 V socket 3 TV socket 4 12 V socket Fig. 106 External socket The 230 V socket and the 12 V sockets can be used to power electrical devices in the awning.

  • Page 106: Circuit Diagrams

    Electrical system 8.11 Circuit diagrams 8.11.1 Circuit diagrams, interior Fig. 109 Circuit diagram, interior (EBL 99) I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...
  • Page 107 Electrical system Fig. 110 Block diagram for panel (IT 994) 2 x AMP flat pins 4.8 x 0.8 + 12 V Pump Lumberg MSFQ 9-pin 12 V indicator 12 V main switch off 12 V main switch on + Starter battery 12 V + Living area battery sensor - Living area battery sensor 230 V indicator...
  • Page 108 Electrical system Fig. 111 Block diagram for panel (DT 220) Lumberg MSFQ 10-pin Pump Tank heater Frost protection valve n. c. Solar starter battery Solar living area battery n. c. n. c. n. c. Lumberg MSFQ 12-pin Main switch relay 1 off Main switch relay 1 on Main switch relay 2 off Main switch relay 2 on...
  • Page 109 Electrical system Lumberg MSFQ 5-pin Full Base waste water tank Lumberg MSFQ 2-pin External temperature sensor External temperature sensor Lumberg MSFQ 8-pin Full Basis additional tank n. c. n. c. n. c. ELCO 8263 3-pin Gas reserve 1 Defroster Minus ELCO 8263 3-pin Gas reserve 2 Defroster...

  • Page 110: Circuit Diagram, Exterior

    Electrical system 8.11.2 Circuit diagram, exterior Fig. 112 Circuit diagram, exterior Fiat/Citroen/Peugeot colours Bürstner Connection colours Left side Blue-black contact BL Yellow Left direction indicator Grey-yellow contact S Blue Fog tail light Black contact 31 White Earth return Red-black contact BR Brake light Yellow contact UR Black...

  • Page 111: Appliances

    Appliances Chapter overview 9Appliances This chapter contains instructions regarding the appliances of the vehicle. The instructions refer exclusively to the operation of the appliances. Further information about the appliances can be found in the instruction man- uals for the appliances, included separately with the vehicle. The instructions address the following topics: heater air conditioning unit...

  • Page 112: Heater

    Appliances Heater Never let gas escape unburned due to danger of explosion. When filling the fuel tank, on ferries or in the garage, never run the heater in gas operation. Danger of explosion! Do not use the space behind the heater as a storage compartment. The circulation fan of the hot-air heater automatically goes on when the hot-air heater is activated and is automatically switched off and on during operation by means of a thermostat control.

  • Page 113: Trumatic C Hot-Air Heater

    Appliances 9.2.3 Trumatic C hot-air heater When there is a danger of frost the heater is not in operation, empty the heating system. Do not use the space above and behind the heater as a storage compart- ment. Depending on the equipment, different heaters are installed in the vehicles. The heaters differ with regard to the energy type with which they can be oper- ated.
  • Page 114 Appliances Switching off: Set the rotary switch (Fig. 115,3) to " " (Fig. 115,4). Close the gas isolator tap "Heater/boiler" and the regulator tap on the gas bottle. After switching off the heater, the circulation fan may still run for a moment to use up the residual heat.

  • Page 115: Alde Hot-Water Heater (Special Equipment)

    Appliances 9.2.4 Alde hot-water heater (special equipment) Never run hot-water heater without heating fluid. Observe notes in chapter 12. Never drill holes in the floor. This might damage the hot-water pipes. Do not use the space above and behind the heater as a storage compart- ment.
  • Page 116 Appliances 230 V electrical operation Switching on: Set the sliding switch (Fig. 117,7) to the required output level. Turn the temperature control knob (Fig. 117,1) on the operating unit to the desired heating level. Set sliding switch (Fig. 117,3) to either "Heater and hot water" (Fig. 117,4) or to "Hot water"...
  • Page 117 Appliances Fig. 118 Alde heat exchanger Starting: Set stop cock handle (Fig. 118,1) parallel to the pipe. Shutting off: Set drain cock handle (Fig. 118,1) at a right angle to the pipe. Position The heat exchanger is installed in the rear bench seat of the central seating group.

  • Page 118: Auxiliary Heat Exchanger (Partially Special Equipment)

    Appliances 9.2.5 Auxiliary heat exchanger (partially special equipment) The fan on the auxiliary heat exchanger can be used for ventilation. The heat output is continuously adjusted. The auxiliary heat exchanger is built into the bench seat. The auxiliary heat exchanger may be used to provide the vehicle's living area with additional heat during the journey.

  • Page 119: Independent Vehicle Heater (Special Equipment)

    Appliances Fig. 122 Transformer for electrical floor Fig. 123 Regulator for electrical floor warming unit warming unit The transformer (Fig. 122,1) for the electrical floor warming unit is installed either in the bench seat, in the bedding box or in the rear garage, depending on the model.

  • Page 120: Air Conditioning Unit (Special Equipment)

    Appliances Fig. 124 Operating unit for independent vehicle heater Switching on manually: Press the button (Fig. 124,7). The heating mode is displayed by the symbol (Fig. 124,9). Switching off manually: Press the button (Fig. 124,7). The symbol (Fig. 124,9) goes off. Switching on the engine Press switch (Fig.

  • Page 121: Truma

    Appliances 1 Button for manual adjustment of cooling fan speed 2 Button to increase the values entered 3 Display 4 Mains switch 5 Button to decrease the values entered 6 Button for manual adjustment of operating mode Fig. 125 Operating controls Switching on: Set the mains switch (Fig.
  • Page 122 Appliances Fig. 126 Receiver Fig. 127 Remote control To execute the individual switching commands, always point the remote con- trol in the direction of the receiver. Switching on: Connect the vehicle to the 230 V power supply. The air conditioning unit is ready to operate.

  • Page 123: Boiler

    Appliances Use the keys (Fig. 127,4) to select the desired switching time (1 to 15 hours). The arrow (Fig. 127,2) flashes and indicates the setting mode. If "ON" (switch on) was selected, the air conditioning unit must be switched off again with the remote control after the setting process. The indicator lamp in the receiver flashes and confirms the programming.

  • Page 124: Trumatic C Boiler

    Appliances 9.4.2 Trumatic C boiler 1 Summer operation water tempera- ture 40 °C or 60 °C 2 Rotary switch 3 Winter operation "Heater and boiler" 4 Red indicator lamp "Fault" 5 Yellow indicator lamp "Boiler heating- up phase" Fig. 128 Operating unit for heater/boiler The boiler is integrated into the heater and is operated with gas (gas opera- tion) or with gas and/or electricity (gas and 230 V electrical operation).
  • Page 125 Appliances Fig. 129 Safety/drainage valve of the boiler Position See chapter 16. Variant: Boiler with gas The boiler is operated exclusively with gas. operation Winter operation In the "heater and boiler" switch setting in winter operation, the boiler is already switched on. Summer operation In summer operation the water can be heated up to 40 °C or 60 °C.
  • Page 126 Appliances 1 230 V electrical operation (1800 W) 2 230 V electrical operation (900 W) 3 Gas operation 4 Gas and 230 V electrical operation (900 W) 5 Gas and 230 V electrical operation (1800 W) 6 Yellow indicator lamp "230 V elec- trical operation"...

  • Page 127: Alde Boiler (Partially Special Equipment)

    Appliances 9.4.3 Alde boiler (partially special equipment) 1 Temperature control knob 2 Operating mode "Hot water" 3 Sliding switch for circulating pump 4 Operating mode "Heater and hot water" 5 Sliding switch for gas operation 6 Red indicator lamp "Fault" 7 Sliding switch for 230 V electrical operation Fig.
  • Page 128 Appliances Gas and 230 V electrical operation If gas and 230 V electrical operation is selected and if the vehicle is con- nected to the 230 V power supply, then the boiler at first only operates in 230 V electric operation. Only if the heat output is insufficient does the gas operation also automatically switch on.

  • Page 129: Cooker

    Appliances For further information, see the separate instruction manual "Alde Com- pact" and observe the maintenance instructions found in chapter 12. Position of the drain See chapter 16. cock(s) Cooker Never let gas escape unburned due to danger of explosion. Before using the cooker make sure that there is sufficient ventilation.
  • Page 130 Appliances Fig. 133 Gas cooker Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Cooker". Open the gas cooker lid (Fig. 133,3). Fold out and set up the flame protection (Fig. 133,1), depending on the model.

  • Page 131: Gas Cooker With Gas Oven And Gas Grill

    Appliances Press the control knob down and hold it. Press the rocker switch (Fig. 134,1). Ignition sparks are generated at the burner. Once the flame is burning, the control knob must be held down for 10 to 15 seconds, until the thermocouple automatically keeps the gas supply open.
  • Page 132 Appliances Fig. 135 Gas cooker with oven and grill Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Cooker". Open the gas cooker lid (Fig. 135,2). Turn the control knob (Fig. 135,1) on the burner you wish to use to the igni- tion position (large flame).

  • Page 133: Gas Oven (Dometic) (Partially Special Equipment)

    Appliances Once the flame is burning, the control knob must be held down for 10 to 15 seconds, until the thermocouple automatically keeps the gas supply open. Release the control knob and turn to the desired setting. Switching on the gas oven: Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".

  • Page 134: Extractor Hood (Partially Special Equipment)

    Appliances Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Oven". Gently press the control knob (Fig. 136,1) and turn left to any position. Press the control knob and hold it down for 5 to 10 seconds. Ignition will take place automatically.

  • Page 135: Operation (Dometic 7 Series)

    Appliances 9.6.2 Operation (Dometic 7 series) Volume Model RM 7401: 104 l (arched door) Operating modes The refrigerator has 2 operating modes: Gas operation Electrical operation (230 V AC or 12 V DC) The operating mode is set with the operating controls on the refrigerator panel. Select only one energy source.

  • Page 136: Operation (Dometic 7 Series With Automatic Power Selection And Frame Heater)

    Appliances The refrigerator can be operated with the following voltages: 230 V AC 12 V DC Switching the 230 V Set energy selector switch (Fig. 140,1) to "230 V". The "230 V" operating operation on: indicator (Fig. 140,2) lights up green. Use the control knob (Fig.
  • Page 137 Appliances 1 Frame heater (FH) button 2 Indicator lamp 3 Energy selector switch 4 Indicator lamps 5 Indicator lamps 6 Control knob for setting the tempera- ture Fig. 141 Operating controls for the refrigerator (Dometic 7 series with AES and FH) 230 V operation If the 230 V power supply is connected, this energy source is selected as the first priority by the AES.

  • Page 138: Refrigerator Door Locking Mechanism

    Appliances normal operating temperature. When changing over the operating mode the thermostat setting will be maintained. The refrigerating temperature is retained regardless of the type of power being used. Frame heater (FH) If the frame heater is switched on, it will always consume current. There- fore, switch off the frame heater if the vehicle engine is off and the vehicle is not connected to the 230 V power supply.
  • Page 139 Appliances There are two positions for locking the refrigerator door in place: Closed refrigerator door during travel and when the refrigerator is in oper- ation Slightly opened refrigerator door as a ventilation position when the refrig- erator is switched off Dometic 7 series Fig.
  • Page 140 Appliances Closing: Fully close the refrigerator door/freezer compartment door. Push the lock (Fig. 144,1) to the side, so that the closed lock " " (Fig. 144,2) is completely visible. Locking in the ventilation Slightly open refrigerator door/freezer compartment door. position: Push the lock completely to the right.

  • Page 141: Sanitary Fittings

    Sanitary fittings Chapter overview 10Sanitary fittings This chapter contains instructions regarding the sanitary fittings of the motorhome. The instructions address the following topics: water tank waste water tank waste water tank heater complete water system toilet compartment toilet 10.1 Water supply, general Fill the water tank with fresh water only.

  • Page 142: Fresh Water Filler Neck With Lid

    Sanitary fittings 10.2.2 Fresh water filler neck with lid The cap for the fresh water filler neck and for the fuel filler neck are very similar. Before filling the tank, always check the label. Fig. 146 Cap for the fresh water filler neck The fresh water filler neck is on the right or left side of the vehicle, depending on the model.

  • Page 143: Draining Water

    Sanitary fittings 10.2.4 Draining water Fig. 147 Water tank Unscrew the cap (Fig. 147,2) on the water tank. Remove the stopper (Fig. 147,1) from the drainage opening (Fig. 147,3). The water will run out. Re-insert the stopper. Screw the cap back on the water tank. 10.3 Waste water tank Never pour boiling water directly into the sink outlet.

  • Page 144: All Models With Underfloor Base

    Sanitary fittings The drain cock and the cleaning opening are located on the underside of the waste water tank. The waste water tank holds 90 litres. Emptying: Attach the waste water hose to the drain pipe. Turn the handle (Fig. 148,1) of the drain cock in flow direction. Completely empty waste water tank.

  • Page 145: Waste Water Tank Heater (Special Equipment)

    Sanitary fittings 10.4 Waste water tank heater (special equipment) Fig. 150 Operating switch The waste water tank may be heated and is insulated. The integrated frost guard prevents waste water from freezing. A switch (Fig. 150,1) on the front of the bench seat or bed may be used to switch the frost guard on and off.

  • Page 146: Emptying The Water System

    Sanitary fittings Fig. 151 Safety/drainage valve (Tru- Fig. 152 Drain cock matic) Position the vehicle horizontally. Switch on 12 V power supply on the panel. If necessary, switch on the water pump on the panel. With hot-air heater: Close the safety/drainage valve. In order to do this, pull the pull switch (Fig.
  • Page 147 Sanitary fittings The Truma system (heater/boiler) has an electric safety/drainage valve and, depending on the model, one or two drain cocks (yellow) for emptying. Depending on the model, the Alde system (heater/boiler) has one or two drain cocks (yellow) for emptying. Fig.

  • Page 148: Toilet Compartment

    Sanitary fittings 10.7 Toilet compartment Do not transport any loads in the shower tray. The shower tray or other items of equipment in the toilet compartment can be damaged. For ventilation purposes during or after a shower, and for drying wet clothing, close the washroom door and open the washroom skylight.

  • Page 149: Swivel Toilet (C-200)

    Sanitary fittings 10.8.1 Swivel toilet (C-200) The Thetford cassette can only be taken out if the sliding trap is closed. Fig. 155 Pulling the retaining clip Preparing toilet: Open the flap for the Thetford cassette and pull the retaining clip upwards to remove the Thetford cassette.
  • Page 150 Sanitary fittings Fig. 158 Filling with sanitary liquid Fill the Thetford cassette with the specified quantity of sanitary liquid. Then add enough water to completely cover the bottom of the Thetford cas- sette. Close the drainage neck with the cap. Return the drainage neck to its original position.
  • Page 151 Sanitary fittings Fig. 161 Rotating the toilet bowl Using the toilet: Move the toilet bowl into a convenient position. Fig. 162 Pre-flush Fill the toilet bowl with some water. Press the flush button. Flushing con- tinues as long as the button is pressed. Use the toilet.
  • Page 152 Sanitary fittings Fig. 164 Operating the flush Flush the toilet. Press the flush button. After flushing close the sliding trap. C-200 E cassette With the C-200 E cassette, proceed as follows to flush the toilet: Fig. 165 Opening the sliding trap Open the sliding trap.
  • Page 153 Sanitary fittings Fig. 167 Removing the Thetford cas- sette Emptying the Thetford Open the flap for the Thetford cassette and pull the retaining clip cassette: upwards to remove the Thetford cassette. Pull out the Thetford cassette as far as it can go. Tip the Thetford cassette slightly and then pull it out completely.

  • Page 154: Toilet With Fixed Seat (C-402)

    Sanitary fittings Fig. 170 Inserting the Thetford cassette Prepare the Thetford toilet for use. Push the Thetford cassette back to its original position. Ensure that the Thetford cassette is secured by the retaining clip. Lock the flap for the Thetford cassette. 10.8.2 Toilet with fixed seat (C-402) The Thetford cassette can only be taken out if the sliding trap is closed.
  • Page 155 Sanitary fittings Fig. 173 Turning drainage neck Place the Thetford cassette upright. Turn the drainage neck upwards. Remove the cap of the drainage neck. Never put the sanitary liquid directly in the toilet bowl. Fig. 174 Filling with sanitary liquid Fill the Thetford cassette with the specified quantity of sanitary liquid.
  • Page 156 Sanitary fittings Fig. 175 Inserting the Thetford cassette Push the Thetford cassette back to its original position. Fig. 176 Thetford cassette secured Ensure that the Thetford cassette is secured by the retaining clip. Lock the flap for the Thetford cassette. Fig.
  • Page 157 Sanitary fittings Fig. 178 Operating the sliding trap Open the sliding trap. To do this, turn the slide lever in an anticlockwise direction. Fig. 179 Operating the flush Flush the toilet. Press the flush button. After flushing close the sliding trap again. To do this turn the slide lever in a clockwise direction.
  • Page 158 Sanitary fittings Fig. 181 Transporting the Thetford cas- sette Place the Thetford cassette upright on the wheels. Press down the handle of the draw bar and move away from the Thetford cassette. The lock of the draw bar releases itself. Pull the draw bar out completely by the handle.
  • Page 159 Sanitary fittings Fig. 183 Inserting the Thetford cassette Prepare the Thetford toilet for use. Push the Thetford cassette back to its original position. Ensure that the Thetford cassette is secured by the retaining clip. Lock the flap for the Thetford cassette. I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...
  • Page 160 Sanitary fittings I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 161: Care

    Care Chapter overview 11Care This chapter contains instructions regarding the care of the vehicle. The instructions address the following topics: exterior of the vehicle interior winter operation At the end of the chapter there is a checklist of measures you must carry out if you are not going to use the vehicle for an extended period of time.

  • Page 162: Windows Of Acrylic Glass

    Care Treat rubber seals of doors and storage flaps with talc. Treat locking cylinder of doors and storage flaps with graphite dust. 11.1.3 Windows of acrylic glass Acrylic glass windows are delicate and require very careful handling. Never rub acrylic glass windows dry as dust particles might damage the surface! Only clean acrylic glass windows with plenty of warm water, some dish washing liquid and a soft cloth.

  • Page 163: Interior Care

    Care 11.2 Interior care If possible, treat stains immediately. Acrylic glass windows are delicate and require very careful handling (see section 11.1.3). Synthetic parts in the toilet and living area are very delicate and should be treated with care. Do not use solvents, alcohol-containing cleansers or scourers containing sand.

  • Page 164: Extractor Hood

    Care Unrolled seat belts can be cleaned with warm soapsuds. The seat belt must be completely dry before being rolled up. Clean water tank with water and dish washing liquid and rinse subse- quently with plenty of fresh water. 11.3 Extractor hood Clean the extractor hood filter occasionally.

  • Page 165: At The End Of The Winter Season

    Care 11.4.3 At the end of the winter season Thoroughly clean the underbody of the vehicle and the engine. When this is done, corrosion-inducing anti-freeze agents (salts, alkaline residues) are removed. Clean the exterior and use regular car wax to protect metal surfaces. 11.5 Lay-up 11.5.1...

  • Page 166: Winter Lay-Up

    Care Activities Done Water system Empty the entire water system. Blow out the residual water from the water pipes (0.5 bar max.). Leave the water taps on in central posi- tion. Leave the safety/drainage valve and all drain cocks open. Ob- serve the notes in chapter 10 Switch off the safety/drainage valve using the battery cut-off switch on the transformer/rectifier.

  • Page 167: Starting Up The Vehicle After A Temporary Lay-Up Or After Lay-Up Over Winter

    Care 11.5.3 Starting up the vehicle after a temporary lay-up or after lay- up over winter Go through the following checklist before start-up: Activities Done Base vehicle Check the tyre pressure on all tyres Check the tyre pressure of the spare wheel Body Clean the pivot bearing of the entrance step Check the functioning of the fitted steady legs...
  • Page 168 Care I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 169: Maintenance

    Maintenance Chapter overview 12Maintenance This chapter contains instructions about inspection and maintenance work concerning the vehicle. The maintenance instructions address the following topics: doors living area battery Alde hot-water heater independent vehicle heater air conditioning unit replacing light bulbs spare parts At the end of the chapter you will find important instructions on how to obtain spare parts.

  • Page 170: Living Area Battery

    Maintenance Bürstner recommends either Molykote PG 65 or Vaseline as lubricants. 12.4 Living area battery When replacing the battery, only use the same type of battery (same capacity and voltage, cycle stability). Never use conventional car batteries (starter batteries). A lead acid battery must not be replaced by a dryfill battery.

  • Page 171: Checking The Fluid Level

    Maintenance 12.5.1 Checking the fluid level Fig. 184 Compensator reservoir hot- water heater Switch off the hot-water heater and allow it to cool down. Check if the fluid level is between the marks "MIN" (Fig. 184,3) and "MAX" (Fig. 184,2) on the compensator reservoir (Fig. 184). 12.5.2 Topping up heating fluid Position the vehicle horizontally.

  • Page 172: Position Of The Bleeding Valves

    Maintenance Switch off the hot-water heater and allow it to cool down. Open bleeding valve (Fig. 185,1) and leave open until no more air escapes. Close bleeding valve. Repeat this procedure at all bleeding valves. Check to see if the hot-water heater warms up. 12.5.4 Position of the bleeding valves Position of the bleeding valves...

  • Page 173: Replacing Bulbs, External

    Maintenance The condensation drain is under the floor of the vehicle. Keep the drain hose free from dirt, leaves or similar to allow the condensation to be drained. 12.8 Replacing bulbs, external Bulbs and light fittings can be extremely hot. Therefore, allow lights to cool down before changing bulbs.

  • Page 174: Front Lights

    Maintenance 12.8.1 Front lights 1 Direction indicator 2 Parking light/low beam 3 Main beam 4 Fog light Fig. 188 Front lights Direction indicator The bulbs are changed in the engine compartment. Open bonnet (see chapter 4). Unhook the direction indicator's tension spring. Remove lamp housing.

  • Page 175: Rear Lights

    Maintenance Put in a new bulb. Reassemble the fog light in the reverse order. 12.8.2 Rear lights Elongated lamps 1 Housing screws 2 Rear light 3 Brake light 4 Direction indicator 5 Reverse light 6 Fog tail light Fig. 190 Rear lights Undo the housing screws (Fig.

  • Page 176: Side Lights

    Maintenance 12.8.3 Side lights 1 Side marker light 2 Marker light Fig. 192 Side lights Side marker light The side marker light (Fig. 192,1) is fixed in the rear area at the top. Please have the LEDs of the side marker light replaced at a service centre. Marker lights The marker lights (Fig.

  • Page 177: Replacing Bulbs, Internal

    Maintenance 12.9 Replacing bulbs, internal Bulbs and light fittings can be extremely hot. Therefore, allow lights to cool down before changing bulbs. Before replacing the bulbs, shut off the power supply on the safety cut- out in the fuse box. Store bulbs in a safe place inaccessible to children.

  • Page 178: Recessed Halogen Light (Flat)

    Maintenance 12.9.2 Recessed halogen light (flat) Fig. 194 Recessed halogen light (flat) Fig. 195 Changing the halogen bulb Halogen bulb 12 V/10 W The recessed halogen light (Fig. 194,1) is installed flush with the panel. Changing bulbs: Use a screwdriver to remove the inner cover ring (Fig. 195,1) from the housing.

  • Page 179: Bathroom Lamp

    Maintenance 12.9.4 Bathroom lamp Fig. 197 Bathroom lamp Halogen bulb 12 V/10 W Changing bulbs: Turn the light covering (Fig. 197,1) a bit in an anticlockwise direction and remove it. Remove halogen bulb. Put in a new halogen bulb. Reassemble the lamp in the reverse order. 12.9.5 Wardrobe light Fig.

  • Page 180: Garage Light

    Maintenance 12.9.6 Garage light Fig. 199 Garage light Halogen bulb 12 V/21 CP Changing bulbs: Use a suitable tool (e.g. a screwdriver) to carefully lever out the cover (Fig. 199,2) at the notch (Fig. 199,1) and remove it. Remove halogen bulb. Put in a new halogen bulb.

  • Page 181: Vehicle Identification Plate

    Maintenance The vehicle described in this instruction manual is built and equipped to factory standards. Special equipment is offered depending on its purpose or use. When fitting special equipment check if such equipment has to be entered in the vehicle documents. Observe the max. permissible gross weight. The authorised dealer or service centre will be happy to advise you.
  • Page 182 Maintenance I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 183: Wheels And Tyres

    Wheels and tyres Chapter overview 13Wheels and tyres This chapter contains instructions about the tyres of the motorhome. The instructions address the following topics: tyre selection handling of tyres changing wheels spare wheel support tyre pressure At the end of the chapter there is a table you can use to find the correct tyre pressure for your vehicle.

  • Page 184: Tyre Selection

    Wheels and tyres Fig. 201 Tighten the wheel nuts or wheel bolts cross-wise Check regularly that the wheel nuts or wheel bolts are firmly seated. Re- tighten the wheel nuts or wheel bolts of a changed wheel cross-wise (Fig. 201) after 50 km (30 miles). See section 13.5.2 for tightening torque.

  • Page 185: Tyre Specifications

    Wheels and tyres 13.3 Tyre specifications Description Explanation 215/70 R 15C 109/107 Q Tyre width in mm Height-to-width proportion in percent Tyre design (R = radial) Rim diameter in inches Commercial (transporter) Load index code for single tyres Load index code for twin tyres Speed index (Q = 160 km/h) 13.4 Handling of tyres...

  • Page 186: Tightening Torque

    Wheels and tyres Use the vehicle jack only for lifting the vehicle briefly while changing the tyre. Do not start the motor while the vehicle is jacked up. Whilst the vehicle is in a jacked up position, persons must not lie down under it.

  • Page 187: Changing The Wheel

    Wheels and tyres 13.5.3 Changing the wheel The footplate of the vehicle jack must be levelly positioned on the ground. Do not tilt the vehicle jack. You should have a useable spare wheel available at all times. For this reason the wheel you have replaced should be repaired immediately. Take note of the general instructions in this chapter.

  • Page 188: Spare Wheel Support (Special Equipment)

    Wheels and tyres 13.6 Spare wheel support (special equipment) Depending on the model, the spare wheel can be found under the vehicle or in the rear garage. 13.6.1 Spare wheel support under the vehicle (Fiat) The spare wheel is fitted below the body between the frame parts of the chassis.
  • Page 189 Wheels and tyres Only check the tyre pressure on cold tyres. The payload and the durability of tyres is directly dependent on the tyre pres- sure. Air is a volatile medium. It is unavoidable that it will escape from tyres. As a rule of thumb it can be assumed that a filled tyre loses pressure at a rate of 0.1 bar every two months.
  • Page 190 Wheels and tyres The vehicles are constantly brought up to the newest technical standards. It is possible that new tyre sizes are not yet included in this table. If this is the case, the Bürstner dealer will be happy to provide the newest values. I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 191: Troubleshooting

    Troubleshooting Chapter overview 14Troubleshooting This chapter contains instructions about possible faults in your vehicle. The faults are listed with their possible causes and corresponding remedies. The instructions address the following topics: braking system electrical system gas system gas cooker gas oven with grill heater boiler refrigerator...
  • Page 192 Troubleshooting Fault Cause Remedy Starter or living area bat- Jumbo flat fuse (50 A) in Replace jumbo flat fuse tery is not charged when the starter or living area (50 A) in the starter or liv- operated in 230 V mode battery is defective ing area battery Charger module in the...

  • Page 193: Gas System

    Troubleshooting Fault Cause Remedy No voltage is supplied by The living area battery is Charge living area bat- the living area battery discharged tery immediately Total discharge damages the battery. If the vehicle is to be laid up for a long period, fully charge the living area battery beforehand Discharging is caused by...

  • Page 194: Gas Cooker/Gas Oven

    Troubleshooting Fault Cause Remedy No gas Gas bottle is empty Change gas bottle Gas isolator tap closed Open the gas isolator tap Regulator tap on the gas Open regulator tap on bottle is closed the gas bottle External temperature is Wait for higher external too low (-42 °C for pro- temperatures...

  • Page 195: Trumatic C Heater/Boiler

    Troubleshooting 14.5.1 Trumatic C heater/boiler Fault Cause Remedy Heating does not ignite Temperature sense on Pull out plug on operating operating unit or remote unit. The heating then sensor defective works without thermostat. Contact the customer service as soon as possi- Red indicator lamp Air in the gas pipe sys- Switch off and on again.

  • Page 196: Alde Heater/Boiler

    Troubleshooting Fault Cause Remedy Safety/drainage valve Battery cut-off switch on Set battery cut-off switch does not close when the transformer/rectifier is to on switching on switched off Operating voltage below Charge living area bat- 10.8 V tery (or have it charged) Fuse is defective Replace fuse on the transformer/rectifier...

  • Page 197: Rm 7655 With Aes

    Troubleshooting Fault Cause Remedy Refrigerator does not Jumbo flat fuse (50 A) in Replace jumbo flat fuse switch on when operating the starter battery is de- (50 A) in the starter bat- in 12 V mode fective tery Flat fuse (20 A) in the Replace flat fuse (20 A) starter battery is defec- in the starter battery...

  • Page 198: Air Conditioning Unit

    Troubleshooting Fault Cause Remedy Refrigerator does not Lack of gas Open regulator tap and switch on in gas opera- gas isolator tap tion, "GAS" indicator Connect a full gas bottle lamp is not lit yellow Cobwebs or burnt resi- Remove the ventilation due in the burning cham- grill on the outside of the vehicle and clean the...

  • Page 199: Truma

    Troubleshooting Fault Cause Remedy Air conditioning unit does No 230 V power supply Connect 230 V power not warm up supply Temperature above 40 °C Temperature has been Adjust the temperature set incorrectly Thermostat defective Contact customer service Water is entering the ve- Drainage holes for con- Clean air conditioning hicle...

  • Page 200: Body

    Troubleshooting Fault Cause Remedy Display for water and Measuring probe in the Clean water/waste water waste water indicates a waste water or water tank tank wrong value is soiled Measuring probe is de- Replace measuring fective probe Waste water tank cannot Drain cock is clogged Open the cleaning cap be emptied...

  • Page 201: Special Equipment

    Special equipment 15.1 Weight details for special equipment 15Special equipment The use of accessories, parts and fittings not supplied by Bürstner may cause damage to the vehicle and jeopardize road safety. Even if an expert's report, a general type approval or a design certification exists, there is no guarantee for the proper quality of the product.
  • Page 202 Special equipment Item designation Surplus weight (kg) Air conditioning unit (Dometic) Driver's cabin air conditioning unit Air conditioning unit (Truma) Fuel tank 125 l Refrigerator (Tec-Tower) LCD television, incl. holder Awning 300 cm Awning 350 cm Awning 400 cm Awning 450 cm Awning 500 cm Awning 550 cm Minisafe...

  • Page 203: Technical Data

    Technical data 16.1 View of ground plans 16Technical data Explanations (1) 230 V fuse (2) Transformer/rectifier with 12 V fuses (3) Living area battery with main fuse (4) Water pump mounted in the tank area (5) Drain cock, waste water tank (6) Electric safety/drainage valve (7) Boiler/heater C 3402/6002 (8) Water drain cock - yellow...
  • Page 204 Technical data Fig. 208 Ground plan I 650 Elegance Fig. 209 Ground plan I 660 Fig. 210 Ground plan I 670 I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...
  • Page 205 Technical data Fig. 211 Ground plan I 675 Fig. 212 Ground plan I 684 Fig. 213 Ground plan I 685 I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...
  • Page 206 Technical data Fig. 214 Ground plan I 686 Fig. 215 Ground plan I 695 Fig. 216 Ground plan I 710 I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 207: Table Of Linear Measures

    Technical data Fig. 217 Ground plan I 821 16.2 Table of linear measures I 610 2300 1810 1060 6300 3450 1810 1790-1980 2850 I 650 2300 1910 1060 6750 3800 1810 1790-1980 2850 I 660 2300 1970 1060 7110 4100 1810 1790-1980 2850 I 670...
  • Page 208 Technical data Charging current 16 A throughout entire sup- 16 A ply voltage range, electroni- cally restricted Trickle charge voltage Automatic switching 13.8 V Repeated charging cycle At < approx. 13.8 V battery (switchover to "Main charg- voltage (with approx. ing") 5 seconds delay) Reflux (without mains and...

  • Page 209: Helpful Notes

    Helpful notes Chapter overview 17Helpful notes This chapter contains helpful tips on how to travel with the motorhome. The instructions address the following topics: road assistance in European countries traffic rules in European countries gas supply in European countries toll regulations in European countries safe ways to spend the night during travel camping in winter At the end of the chapter there is a checklist containing the most important...
  • Page 210 Helpful notes Country Emergen- Breakdown service cy services Police Greece ELPA 104 00 171/112 Great Britain AA (08 00) 0 28 90 18/ (08 00) 82 82 82 Ireland AA Dublin 18 00 66 77 88 999/112 999/112 Iceland F.I.B 5 11 21 12 Italy ACI 803 116/8 00 11 68 00 Croatia...

  • Page 211: Speed Limits And Permissible Dimensions

    Helpful notes Country Emergen- Breakdown service cy services Police Slovakia ASA 1 81 24 155/112 158/112 Slovenia AMZS (1) 9 87/ (003861) 5 30 53 53 Spain RACE 9 15 94 93 47 Czech Republic UAMK CR 12 30 155/112 158/112 Turkey –...
  • Page 212 Helpful notes Country Max. dimen- Gross Outside Motor- sions in me- weight built- built-up ar- ters up ar- Width Lgth. Germany 2.55 Up to 3.5 t 3.5 t up to 7.5 t Over 7.5 t Estonia 2.50 Up to 3.5 t Over 3.5 t Finland 2.60...
  • Page 213 Helpful notes Country Max. dimen- Gross Outside Motor- sions in me- weight built- built-up ar- ters up ar- Width Lgth. Romania 2.50 Up to 3.5 t Over 3.5 t Russia 2.50 Up to 3.5 t Over 3.5 t Sweden 2.60 Up to 3.5 t 1) 12) 70-110...

  • Page 214: Driving With Low Beam In European Countries

    Helpful notes Drivers who have had their driver's licence for less than two years must not drive faster than 70 km/h Swedish campsites often require the motorhome to have a closed waste water system A heavy goods vehicle supplement must be paid on all roads for all vehicles exceeding 3.5 tons max.

  • Page 215: Sleeping In The Motorhome Away From Camping Areas

    Helpful notes 17.5 Sleeping in the motorhome away from camping areas Country Sleeping on Sleeping on Comments roads and privately fields owned lands Belgium On highway rest areas max. 24 hours permitted Bulgaria Denmark On streets and squares only up to 11 hours with a parking disc Germany Staying overnight for one night...

  • Page 216: Gas Supply In European Countries

    Helpful notes Country Sleeping on Sleeping on Comments roads and privately fields owned lands Portugal Staying overnight for one night on motorway service stations and car parks under 10 hours are tolerated Romania Russia Sweden Not on agriculture areas or in the vicinity of houses.

  • Page 217: Toll Regulations In European Countries

    Helpful notes Use blue bottles from the firm Campingaz (distributed world-wide). Only use gas bottles with safety valves. When bottles from other countries are used, check the gas bottle compart- ments to see if the gas bottles fit into them. Gas bottles from other countries do not always display the same size as your own gas bottles.

  • Page 218: Travel Checklists

    Helpful notes When the vehicle has been positioned, release the handbrake to prevent freezing. No snow walls should be allowed to cover the built-in forced ventilation. Keep the built-in forced ventilation free from snow and ice. Make sure the air circulation is good. Good air circulation prevents mois- ture from collecting and makes it easier to heat the living area.
  • Page 219 Helpful notes Object Object Object Living area Dustbin Insect lamp Rain clothes Road atlas Insect repellent First aid kit Bath towels Deck of cards Travel guides/park- ing guide Bath shoes Broom Rucksack Batteries Candles Sleeping bags Bed sheets Dust pan Pencils and paper Bed linen Coat-hangers...
  • Page 220 Helpful notes Object Object Object Documents List of addresses Registration book Identity card Registration confir- Driving licence Passport mation(s) Allergy certificate Green insurance Writ of protection card Instruction manuals Vaccination certifi- Vignette/toll card cate Instruction leaflets Credit card Visa for medicines I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN...

  • Page 221: Inspection Plan

    Inspection plan 18Inspection plan Pos. Component Activity Interval Auxiliary support Lubrication Annually Joints, hinges Lubrication Annually Refrigerator, heater, boiler, cook- Function check Annually er, lighting, flap and door closures, toilet, seat belts Windows, skylights Function check, water Annually ingress test Upholstery, curtains, blinds Visual check Annually...
  • Page 222 Inspection plan Delivery Pos. 1-11 Stamp of the Bürstner dealer Date Signature 1st year Pos. 1-11 2nd year Pos. 1-14 Stamp of the Bürstner dealer Stamp of the Bürstner dealer Date Signature Date Signature 3rd year Pos. 1-11 4th year Pos.
  • Page 223 Index 12 V fuses ......101 Automatic power selection (AES) ..136 Auxiliary heat exchanger For Thetford toilet .
  • Page 224 Index Boiler (Trumatic C) ..... . 124 Gas cooker ......163 Emptying .
  • Page 225 Index Driver's door, inside Conversion door ..... 47 Locking ......48 Roman shade, closing .
  • Page 226 Index Furniture flaps Closing ......55 Fault current protection switch ... . . 100 Opening .
  • Page 227 Index Gas and 230 V electrical operation, switching off ......116 Halogen spotlight ..... . . 178 Gas and 230 V electrical operation, Handbrake .
  • Page 228 Index External flap ....51 Furniture flap ......55 Keys .
  • Page 229 Index Date, setting ......96 Recessed halogen light ....178 Defroster, switching on and off .
  • Page 230 Index Roof rack, load ......21 Spare wheel support .....188 Roof rail .
  • Page 231 Index Thetford cassette ... 149 Hot-air heater ..... . . 195 Emptying .
  • Page 232 Index Waste water tank ....143 Weight details for special equipment ..201 Care ......162 Wheel chocks .

Table of Contents