Assa Abloy Corbin Russwin IN120 Series Installation Instructions Manual page 25

IN120 & IN220 Series
PED5000 Series
Exit Devices
6
Installation Instructions PED5600 Mortise Exit Device
7 Install Chassis Cover
a. Retrieve harness from end of rail. Harness has limited travel and can be damaged.
b. Attach harness to female connector on chassis.
c. Install rail and tighten chassis and trim screws. Attach end bracket per exit device
instructions.
d. Secure chassis cover to chassis using four (2) #8-32 x 5/16" and (2) #8-32 x 5/8" (rail side)
oval head machine screws.
(2) #8-32 x 5/16"
oval head machine screws
IN120/220 Mortise Exit Installation Continues With Section 9
Copyright © 2016, 2019, 2021-23, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Fig. 22
Important Note:
25
(2) #8-32 x 5/8"
oval head machine screws
FM593 09/23