Advertisement
Table of Contents
INSTALLATION MANUAL
Installation Parts Kit to Install
H140/PA140 Winch on Winch-ready
• Installation Parts Kit – PACCAR Part number 65248,
Caterpillar Part number 504-7377
• Winch (sold separately) – PACCAR Part number 09091, 09098,
or equivalent. Caterpillar Part number 431-9575 or equivalent.
• D8T Tractor factory-equipped or field-retrofitted with Caterpillar
"Hydraulics, Winch" and "Controls, Winch"
Visit our Web site at www.paccarwinch.com for the most comprehensive collection of winch, hoist, and drive
information on the Internet. Most publications and specification sheets are available for downloading.
LIT2714
February 2017
Printe d in USA
AND PARTS LIST
Caterpillar D8T Dozer
CAT D8T
1
©2017 PACCAR Inc.
All rights reserved
Advertisement
Table of Contents
Related Manuals for Paccar CARCO CAT D8T
Summary of Contents for Paccar CARCO CAT D8T
- Page 1 Caterpillar D8T Dozer • Installation Parts Kit – PACCAR Part number 65248, Caterpillar Part number 504-7377 • Winch (sold separately) – PACCAR Part number 09091, 09098, or equivalent. Caterpillar Part number 431-9575 or equivalent. • D8T Tractor factory-equipped or field-retrofitted with Caterpillar “Hydraulics, Winch”...
-
Page 2: Table Of Contents
Table of Contents Foreword ....................... 2 General Safety Recommendations ............... 3 Mounting Group Metric Diagram and Components ..........4 Mounting Group Metric Installation ............... 5 Winch Motor Lines Group Diagram and Components .......... 6 Winch Motor Lines Group Installation ..............7 Metric Conversion Table .................. -
Page 3: General Safety Recommendations
GENERAL SAFETY RECOMMENDATIONS Safety for operators and ground personnel is of prime 12. DO NOT exceed the maximum pressure, kPa (PSI), concern. Always take the necessary precautions to or flow, LPM (GPM), stated in the winch specifica- ensure the safety of others as well as yourself. To prop- tions. -
Page 4: Mounting Group Metric Diagram And Components
MOUNTING GROUP METRIC COMPONENTS Part number 63414 ITEM PACCAR DESCRIPTION CATER- QTY. WINCH PILLAR PART NO. PART NO. 101872 Capscrew 7X-0427 105597 Bracket, lefthand 152-8372 105598 Bracket, righthand 152-8371 103102 Hitch pin 197-7837 70148 16288-1248 Cotter pin 3B-5320 101206 Washer C0125Z hard... -
Page 5: Mounting Group Metric Installation
MOUNTING GROUP METRIC INSTALLATION Part number 63414 Mounting Group 1. If present, remove Caterpillar factory plugs from indi- CAUTION cated holes in rear of tractor frame (14 holes). Leave factory plugs in holes that are not used to mount winch. Motor cover weighs approximately 95 pounds (43 kg). -
Page 6: Winch Motor Lines Group Diagram And Components
WINCH MOTOR LINES GROUP COMPONENTS Part number 63673 ITEM PACCAR DESCRIPTION CAT. ITEM PACCAR DESCRIPTION CAT. PART PART PART PART 101277 Split flange half (CAT) 1P-5766 101830 Hose -8 X 29.0 163-3189 104319 Capscrew 7X-0313 101282 Elbow, 90-degree 148-8364 101432... -
Page 7: Winch Motor Lines Group Installation
WINCH MOTOR LINES GROUP INSTALLATION Part number 63673 Lines Group NOTE: To minimize loss of hydraulic fluid during instal- ers retained from Step 7. Install face-seal end of hose lation of the winch hydraulic connections, it may be (Item 7) to adapter fitting (Item 6) as shown. Leave desirable to drain the tractor implement hydraulic sys- split-flange fasteners and hose end nut finger tight to tem or at least draw a sustained vacuum on the tractor... -
Page 8: Metric Conversion Table
METRIC CONVERSION TABLE English to Metric Metric to English LINEAR inches (in.) X 25.4 = millimeters (mm) millimeters (mm) X 0.03937 = inches (in.) feet (ft.) X 0.3048 = meters (m) meters (m) X 3.281 = feet (ft.) miles (mi.) X 1.6093 = kilometers (km) kilometers (km)
Need help?
Do you have a question about the CARCO CAT D8T and is the answer not in the manual?
Questions and answers