THOMSON SPEEDTOUCH 546 - VERSION 6 Installation And Setup Manual page 16

Chapter 2
Basic Installation
10
3
Scroll down and read all the instructions carefully, select I have read and I fully
understand the Safety Instructions and Regulatory Information to confirm
your reading, and then click Next.
Your SpeedTouch™ is designed and tested to meet the latest safety
!
standards. However, to ensure safe use of this product, it is important
that you carefully read and comply with the Safety Instructions and
Regulatory Notices shown and/or available in the Safety and
Regulatory booklet before you install the SpeedTouch™.
Subsequent screens guide you through the preliminary hardware setup of
your SpeedTouch™.
4
Follow all the instructions carefully and click Next each time your are ready to
proceed.
As soon as all the required preliminary connections to your SpeedTouch™
have been made, and your SpeedTouch™ is turned on and initialized, the final
steps in the Quick-Install Wizard will:
Make all information readily available to let the Home Install Wizard
configure your SpeedTouch™ to connect to the Internet.
See " Connection details from your Internet Service Provider (ISP)" on
page 5 for an overview of information you must have readily available.
Start the SpeedTouch™ Home Install Wizard.
5
Click Set up my SpeedTouch to continue.
6
The procedure continues with the SpeedTouch™ Home Install Wizard.
Proceed with " Home Install Wizard" on page 11.
E-DOC-CTC-20051017-0068 v1.0