Water Tank; Technical Specifications; Storage And Disposal - HOMCOM 824-081V80 Manual

AIR INLET AND INNER FILTER
1. Use a screwdriver to unscrew the two cover screws.
2. Remove the air inlet cover and wipe clean, or clean using a vacuum cleaner.
3. Use a duster to gently dust off the inner filter.
4. Replace the inner filter and air inlet cover and tighten the screws to fix it in
position.

WATER TANK

WARNING! Unplug the unit from the mains supply before removing the water tank.
●When the unit or the cool function will not be used for some time, empty the water
from the water tank.
●Use mild soap and water to clean the water tank.
●Allow it to air dry or wipe dry using a soft cloth. Make sure the water tank is
completely dry before replacing. This helps prevent any mold or mildew inside the
water tank.
●Empty the water and dry out the ice blocks before storage.
Make sure the air inlet cover and water tank are replaced in position before
switching on again.

TECHNICAL SPECIFICATIONS

Rated Voltage: 120V~ 60Hz
Rated Power:65W
Note: As a result of continual improvements, the design and specifications of the
product within may differ slightly from the unit illustrated on the packaging.

STORAGE AND DISPOSAL

If you do not plan to use the product for extended periods of time, it is
recommended that it is cleaned and stored (preferably in its original packaging) in a
cool, dry place.
Do not put your batteries in with your household rubbish. Take them to an
appropriate disposal/collection site.
Do not dispose of electrical products with household waste. Please check with your
local council for advice on disposal or recycling. If electrical appliances are
disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being.
Product Size:240 X 250 X 540mm
Tank Capacity: 4 Liters
9