Reminder S{Mboi - Correction Factors; Pulsing The Isplay - Gossen MetraWatt Multi Pro Instruction Manual

Reminder symbol - correction factors
The reminder symbol will appear in the dis-
play in the functions f, t, LW/EV,
f ,
when
you have programmed a correction factor in
the COR function (page 10).
Warnings of the limits of the measuring
range
"Over" Range
The readout nnn signals that the values
measured are greater than the meter can
read (for technical data see page 25) .
Push the value change switch down to
bring the settings back to within the perfor-
mance range of the meter.
"Under" Range
The readout
UUu
signals that the values are
below the indicating range of the meter. So
move value change switch upwards.
Pulsing of the display
This signal warns you that the readout must
not be used, because the values are under
or over range or that the aperture or shutter
speed preselected by you are unsuitable for
that subject.
UUu
[
•
7