For questions in regards to hardware/ software compatibility, customers should contact Neousys Technology Inc. sales representative or technical support. To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be responsible for any interoperability or compatibility issues that may arise when (1) products, software, or options not certified and supported;...
Neousys Technology Inc. (Taipei, Taiwan) 15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan Tel: +886-2-2223-6182 Fax: +886-2-2223-6183 Email, Website Americas Neousys Technology America Inc. 3384 Commercial Avenue, Northbrook, IL 60062, USA (Illinois, USA) Tel: +1-847-656-3298Email, Website China Neousys Technology (China) Ltd.
This manual is intended to be used as an informative guide only and is subject to change without prior notice. It does not represent commitment from Neousys Technology Inc. Neousys Technology Inc. shall not be liable for any direct, indirect, special, incidental, or consequential damages arising from the use of the product or documentation, nor for any infringement on third party rights.
Safety Precautions Safety Precautions ⚫ Read these instructions carefully before you install, operate, or transport the system. ⚫ Install the system or DIN rail associated with, at a sturdy location ⚫ Install the power socket outlet near the system where it is easily accessible ⚫...
Service and Maintenance/ ESD Precautions Service and Maintenance ⚫ ONLY qualified personnel should service the system ⚫ Shutdown the system, disconnect the power cord and all other connections before servicing the system ⚫ When replacing/ installing additional components (expansion card, memory module, etc.), insert them as gently as possible while assuring proper connector engagement ESD Precautions...
About This Manual About This Guide This quick introduction guide introduces Neousys Nuvo-10000 series’ basic I/Os. ® The system features support for an Intel / 12 Gen Core™ CPU processor with up to 7 slot expandability. The system is also capable of supporting one 125W ®...
Introduction Nuvo-10000 series is the ideal choice to replace your bulky rack-mount or wall-mount IPC systems. The system offers up to seven PCIe/ PCI slots in its compact chassis to deliver the same level of expandability as off-the-shelf 4U 19” IPCs. Users can install a wide variety of AIO, DIO, communication, image capture and motion control cards for versatile applications.
Page 11
Nuvo-10000 Series 4x USB 3.2 Gen2 (5 Gbps) ports USB2.0 1x USB 2.0 port with Type-A connector (internal) Audio 1x 3.5mm jack for mic-in and speaker-out Storage Interface SATA 2x SATA ports for internal 2.5” HDD/ SSD installation 1x M.2 2280 SATA interface...
Page 13
Nuvo-10000 Series USB2.0 1x USB 2.0 port with Type-A connector (internal) Audio 1x 3.5mm jack for mic-in and speaker-out Storage Interface SATA 2x SATA ports for internal 2.5” HDD/ SSD installation 1x M.2 2280 SATA interface Expansion Bus PCI Express...
Page 15
Nuvo-10000 Series USB2.0 1x USB 2.0 port with Type-A connector (internal) Audio 1x 3.5mm jack for mic-in and speaker-out Storage Interface SATA 2x SATA ports for internal 2.5” HDD/ SSD installation 1x M.2 2280 SATA interface Expansion Bus PCI Express...
Nuvo-10000 Series Nuvo-10007/ 10034 Dimension NOTE Nuvo-10007/ 10034 systems share the same external dimensions. All measurements are in millimeters (mm). 1.3.1 Nuvo-10007/ 10034 I/O Panel View...
Upon receiving and unpacking your Nuvo-10000 system, please check immediately if the package contains all the items listed in the following table. If any item(s) are missing or damaged, please contact your local dealer or Neousys Technology. Nuvo-10000 Packing List...
Nuvo-10000 Series Nuvo-10000 Series I/O Panel NOTE Nuvo-10000 series systems share the same I/O connections and differ only in their number of PCIe and PCI slots. For demonstration purposes, an illustration matching Nuvo-10007/ 10034 will be used in the following sections.
Page 22
Nuvo-10000 Series The HDMI port is a high-resolution graphics/ data port HDMI port supporting up to 3840 x 2160 @ 30Hz. Support display resolutions up to 4096 x 2304. Compatible with DisplayPort HDMI/ DVI via respective adapter/ cable (resolution may vary).
Nuvo-10000 Series 2.2.1 Reset Button The reset button is used to manually reset the system in case of system halt or malfunction. To avoid unexpected reset, the button is purposely placed behind the panel. To reset, please use a pin-like object (eg. tip of a pen) to access the reset button.
Nuvo-10000 Series 2.2.2 Power Button The power button is a non-latched switch for ATX mode on/off operation. To turn on the system, press the power button and the PWR LED should light-up green. To turn off the system, issuing a shutdown command in OS is preferred, or you can simply press the power button. To force shutdown when the system freezes, press and hold the power button for 5 seconds.
Nuvo-10000 Series 2.2.3 3.5mm Speaker/ Headphone Output Jack The system audio function uses high definition audio codec. There is a female 4-pole audio jack for headphone (speaker) output and microphone input. To utilize the audio function in ® Windows, you need to install corresponding drivers for both Intel Q670 chipset and audio device drivers.
Nuvo-10000 Series 2.2.4 HDMI Port The High-Definition Multimedia Interface (HDMI) port provides uncompressed high-quality digital video and audio transmission between the system and a multimedia display device on a single cable. You can connect to other digital inputs by using a HDMI-to-DVI or HDMI-to-DP cable.
Nuvo-10000 Series 2.2.5 DisplayPort The DisplayPort (DP) output is a digital display interface that mainly connect video source and carry audio to a display device. When connecting a DP, it can deliver up to 4K UHD (4096 x 2304) in resolution. The system is designed to support passive DP adapter/ cable. You can connect to other display devices using DP-to-HDMI cable or DP-to-DVI cable.
Nuvo-10000 Series 2.2.6 USB3.2 Gen2x1 The system’s USB 3.2 Gen2x1 ports (10Gbps) feature panel screw fix hole (indicated in red), and are implemented via native xHCI (eXtensible Host Controller Interface) controller. They are backward compatible with USB3.2 Gen.1 USB 2.0, USB 1.1 and USB 1.0 devices. Legacy USB is also supported so you can use USB keyboard/mouse in DOS environment.
Nuvo-10000 Series 2.2.7 LED Indicators There are three LED indicators on the I/O panel. From top to bottom, they are power (PWR), Watchdog timer (WDT) and hard disk drive activity (HDD). The descriptions of these three LEDs are listed in the following table.
Nuvo-10000 Series 2.2.8 Gigabit Ethernet Port The system has a GbE port featuring panel screw fix hole (indicated in red), and it supports ® Wake-on-LAN functions. The GbE port is implemented with Intel I219-LM controller with one dedicated PCI Express link for maximum performance. When the Ethernet connection is...
Nuvo-10000 Series 2.2.9 2.5G Ethernet Port The systems has a 2.5Gb Ethernet port featuring panel screw fix hole (indicated in red). The port has one dedicated PCI Express link for maximum network performance. Please refer to the table below for LED connection statuses.
Nuvo-10000 Series 2.2.10 USB3.2 Gen1x1 Port The system’s USB 3.2 Gen1x1 ports (5Gbps) feature panel screw fix hole (indicated in red), and are implemented via native xHCI (eXtensible Host Controller Interface) controller. They are backward compatible with USB 2.0, USB 1.1 and USB 1.0 devices.
Nuvo-10000 Series 2.2.11 Clear CMOS Button Indicated by the blue arrow, the CMOS Reset button is used to manually reset the motherboard BIOS in case of system halt or malfunction. To avoid unexpected operation, it is purposely placed behind the panel. To reset, please use the tip of a pen, press and hold for at...
Nuvo-10000 Series 2.2.12 COM2 Port The COM port is implemented using industrial-grade ITE8786 Super IO chip (-40 to 85°C) and provide up to 115200 bps baud rate. It is a software-configurable RS-232/422/485 port. The operation mode of can be set in BIOS setup utility. The following table describes the pin definition of the COM port.
Nuvo-10000 Series 2.2.13 COM1 Port The COM1 port is implemented using industrial-grade ITE8786 Super IO chip (-40 to 85°C) and provide up to 115200 bps baud rate. It is a software-configurable RS-232/422/485 port. The operation mode of can be set in BIOS setup utility. The following table describes the pin definition of the COM port.
Nuvo-10000 Series 2.2.14 3-pin Terminal Block for DC Input The system accepts a wide range of DC power input from 12 to 35V via 3-pin pluggable terminal block, which is fit for field usage where DC power is provided. And the screw clamping connection of the terminal block gives a very reliable way of wiring DC power.
Nuvo-10000 Series 2.2.15 COM3/ 4/ 5 Port COM3, COM4 and COM5 are 3-wire RS-232 ports share single DB9 connector. You can directly connect this to one external device with 3-wire RS-232 interface, or use an optional 1-to-3 Y-cable to have three DB9 connectors for more devices. The following table describes the pin definition of the DB9 connector as well as the Y-cable.
Need help?
Do you have a question about the Nuvo-10000 Series and is the answer not in the manual?
Questions and answers