Important Notice - Panasonic PGA26E19BA-SWEVB008 Manual

Important Notice

Please read and understand the following items, "Restriction", and "Caution" before using the evaluation board:
Restriction
 The evaluation board is intended for use as engineering development, verification or evaluation purposes
only.
 This evaluation board is not intended for a finished end-product fit for general consumer use.
 Do not operate in condition other than the recommended settings.
 The evaluation board must be used only by qualified engineers and technicians that have electronics
training, familiar with handling of high-voltage electrical systems and observe good engineering practise
standards.
 The evaluation board is meant to be operated in lab environment under the safe conditions.
 Please use a protective case (accessory) during evaluation.
 All of the specifications and evaluation data in this manual are for reference only and not guaranteed. The
information may subject to change without notice. Please contact to Panasonic representative for the latest
information.
 The user assumes all responsibility and liability for proper and safe handling of this evaluation board.
Further, the user indemnifies Panasonic from all claims arising from the handling or use of the evaluation
boards.
 The technical information described in this document is intended only to show the main characteristics and
application circuit examples of the products. No license is granted in and to any intellectual property right
or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is
assumed by our company as to the infringement upon any such right owned by any other company which
may arise as a result of the use of technical information described in this document.
Caution
 The evaluation board carries hazardous high voltage. Do not touch when power is applied. Otherwise, it
may cause severe injury, disability or death.
 Electric charge may be accumulated in the capacitors. To prevent electrical shock, please ensure all the
capacitors are properly discharged before touching the evaluation board.
 It is the user's responsibility to confirm that the voltages, isolation requirements, and rated value are
identified and understood, prior to handling the evaluation board.
 Do not leave the evaluation board unattended while power is applied and do not perform other activity near
the evaluation board while power is applied.
 This board contains parts that are susceptible to damage by electrostatic discharge (ESD). It is the user's
responsibility to take any and all appropriate precautions with regard to electrostatic discharge when using
the evaluation board.
 Should the evaluation board does not meet the specification indicated in the application note, the board
may be exchanged with a new one within 30 days from the date of delivery. When exchanging the
evaluation board, please return the board with all items included.
 The warranty on this evaluation board is considered void once a part on the board is removed or modified.
 The evaluation board does not fall within the scope of the technical requirements of the following directives
or other related directives:
- Restriction of Hazardous Substances (RoHS)
- Directive on Waste Electrical and Electronic Equipment (WEEE)
- Mandatory conformity marking for products sold in the European Economic Area (CE)
- Federal Communications Commission (FCC)
- Underwriters Laboratories, Inc. (UL)
PGA26E19BA-SWEVB008 Ver. 1.1 27