Reception Result Display - Seiko GPS SOLAR 5X83 Handy Manual

15

Reception result display

Check whether the leap second data reception was successful
The results of GPS reception (time adjustment or time zone adjustment) and leap second data reception (successful / failed) are
displayed for 5 seconds.
Press Button A once and
1
then release it
The seconds hand and multi-
function indicator hand display
the reception result.
* When Button A is kept pressed, the
watch enters the Manual time
adjustment operation.
The result of the
2
reception is displayed
The seconds hand displays the
result of the GPS signal reception
(time adjustment or time zone
adjustment).
Press and The multi-function indicator hand
then
points to "1" or "4+" which shows
release
"time adjustment" or "time zone
adjustment."
Seconds hand
Multi-function indicator hand
* The indicator hand points to "4+" as
a result of time zone adjustment.
Seconds hand: Reception result
(success/failure)
Result Successful
Display
Y: 8-second
Position
position
* After 5 seconds have elapsed or
when Button B is pressed, the watch
returns to the time display mode.
Press Button A and then release it while the result of the
3
reception is displayed (for 5 seconds) in step 2
The seconds hand displays the result of the leap second data
reception (successful / failed).
The multi-function indicator hand displays "LEAP SEC." of the leap
second data reception.
Seconds hand: Reception result
(success/failure)
Result Successful
Display
Y: 8-second
Position
position
Seconds hand
Failed
* After 5 seconds have elapsed or
when Button B is pressed, the watch
returns to the time display mode.
N: 52-second
position
17
When the leap second data
reception result is Y
(successful)
Failed
• The leap second data
reception was successful.
Use the watch as it is.
When the leap second data
reception result is N (failed)
N: 52-second
position • The leap second data
reception, periodically
Press and
performed, has not been
then
successful.
release
It will be performed
automatically with the next
GPS signal reception
(automatic time adjustment,
manual time adjustment or
time zone adjustment). Use
the watch as it is.
* The leap second data is received on
or after December 1st and June 1st.
* Even when the leap second data
reception has not been successful,
the time is correct until the leap
second data is added (deleted).