Table of Contents
Advertisement
13
When boarding (in-flight mode (
In-flight mode (
Set to the in-flight mode (
where the reception may
influence operation of other
electronics devices in an
airplane, etc.
In the in-flight mode (
GPS signal reception (time
zone adjustment, manual time
adjustment, and automatic time
adjustment) does not work.
< In-flight mode (
) >
The multi-function indicator hand
points to
.
* When the in-flight mode (
the multi-function indicator hand
indicates the day of the week (or the
energy level).
)
Set to the in-flight mode (
)
Pull out the crown to the
1
first click
The seconds hand moves to
display the currently set time
zone.
), the
The multi-function indicator hand
indicates DST (Daylight Saving
Time) setting.
) is reset,
Reset the in-flight mode (
Turn off the in-flight mode when leaving an airplane, etc.
If it is not turned off, the watch will not be able to receive GPS signals.
Carry out operation A to C.
B will make the multi-function indicator hand point to "4+", indicating that in-flight mode has been turned
off. (5 seconds)
Afterward, it indicates the DST (Daylight Saving Time).
C will make the multi-function indicator hand display the day of the week, and the in-flight mode (
be turned off.
* If the energy level is low, the day of the week is not displayed, and the watch returns to a charging status display of "low."
))
).
Continue to press Button B
2
(3 seconds)
The multi-function indicator hand
displays the in-flight mode (
(5 seconds)
Afterward, it indicates the DST
(Daylight Saving Time).
0 1 2
Pull out to
the first
click
* Note that turning the crown after A
and B will change the time zone.
).
15
3
Push the crown back in
The multi-function indicator hand
).
returns to display the in-flight
mode (
).
When the in-flight mode (
Press for
3 seconds
set, the multi-function indicator
hand does not indicate the day of
the week.
0 1 2
Push
back in
) is
) will
Advertisement
Table of Contents
