THOMSON DPL930VD-RADIO Manual

DPL930VD-EN DVD 7/12/04 5:39 PM Page 1

Basic Playback Features

1. To select the DVD/CD input source, press SOURCE on the
main unit until "DVD/CD" appears on the display. You may
also directly press DVD/CD on the remote.
2. Press OPEN/CLOSE to open the tray and load a disc, with
the label facing up. Press OPEN/CLOSE again to close the
tray.
3. After inserting the disc, the unit may
- start playback automatically.
- show the disc menu, select the option "play movie" on
screen and press OK.
- show the player's main menu, select the option "play"
and press OK.
4. Press PLAY/PAUSE on the main unit or press PAUSE on
the remote to pause playing during playback. Press again
to resume normal playback.
REV
AUX 2
VCR
4. Press PREV to go back to the previous chapter or NEXT
to move to the next chapter.

DVD Player

• Press STOP once to stop playback and go into resume
mode.
REV

Quick search

PR
1. While playing a disc, press REV on the remote control to
scan backward through the disc. Press FWD on the remote
to scan forward.
Press repeatedly to change the searching speed.
FWD
REV
AUX 2 AUX 1
VCR SAT - CABLE
2. Press PLAY at any time to resume normal playback.

Time search

1. Press INFO on the remote during playback, info bar will
appear.
2. Press LEFT/RIGHT on the remote to highlight the time.
3. Use the number buttons to input the time you want to
skip to.
4. Press OK on the remote to confirm.
FWD

Freeze frame, frame advance

1. Press PAUSE on the remote control to freeze the picture
during playback.
AUX 1
SAT - CABLE
2. Press PAUSE on the remote control to enter frame
advance mode.
3. Press REV or FWD to advance frame by frame.
4. Press PLAY to resume normal playback.
PR
EN
FWD
AUX 2 AUX 1
VCR SAT - CABLE
19