THOMSON DPL911VD Quick Connect Manual

Speakers and Tuner Antenna
Speakers NOTE:
• Match the speaker cables' color • Match the color of the cables
to the speaker / receiver terminals to the terminals on the receiver.
as shown on the illustration. • Connect the black color cable
• Match the speakers to the to the "-" (negative) terminal.
correct terminals on the receiver
(example: connect left speaker to
the left speaker terminal on the
receiver)
Follow the illustration
SPEAKER HOOKUP
below to hook up your
speakers.
FRONT RIGHT FRONT LEFT CENTER
- + - + CENTER
- +
SUBWOOFER
+ Purple
-
Black
FR FL C SR SL SW
6 ohm 6 ohm
REAR REAR
- + - +
RIGHT
LEFT
SURROUND
SURROUND
For details, please refer to the
Instruction manual.
("Connecting the Speakers")
ANTENNA HOOKUP
AM
FM 75
- +
Audio/Video components
Follow the diagram to connect audio Connections described below are also applicable for any component
and video components.
having analog outputs (TV, Cable & Satellite boxes, CD
recorder/player.)
A. Connecting your audio device
Connect the Audio cable.
1.
B. SCART Connections
1. Make sure your TV is equipped
with the SCART terminals.
2. Connect to the TV with the SCART
cable.
3. Connect the cable to the unit
terminals.
4. Select SCART output on the unit.
A
5. If your TV is not equipped with a
SCART jack, connect the composite
video cable as shown in the diagram.
Setup Video output
C.
1. You can select either S-video or
SCART as your video output by
moving the switch at the back of
the unit (*), then turn off and on
the unit to validate selection.
When S-video output is selected,
only S-video and composite output
will function, SCART output will be
disabled.
When SCART output is selected, only
composite output will function, the
S-video output will be disabled.
Cables
Below illustrations are cables usually used for audio / video connections.
RCA Audio cable Composite Video
(Analog) Cable (Usually yellow)
Not included 1Piece
SCART
IN
ME67
B
M E 6 7
*
S-Video cable SCART Cable
Not Included Not Included