Table 12. Processors details (continued)
UPI Power Management
CPU Frequency Limits
Recovery and RAS
Use this menu to configure recovery policies and advanced reliability, availability, and serviceability settings.
N/A
Select the desired power management level for the CPU
UPI interface. L1 saves the most power but has longer
latency compared to L0p or Disabled. When a preset
mode is selected, the low-level settings are not
changeable and will be grayed out. If user would like to
change the settings, please choose [Custom Mode] in
"Operating Mode" located under "System Setting"
submenu.
N/A
The maximum frequency (turbo, AVX, and non turbo) can
be restricted to a frequency that is between the maximum
turbo frequency for the CPU installed and 1.2GHz. This
can be useful for synchronizing CPU tasks. Note that the
max frequency for N+1 cores cannot be higher than N
cores. If an illegal frequency is entered, it will
automatically be limited to a legal value. If the CPU
frequency limits are being controlled through application
software, leave this menu item at the default ([Full turbo
uplift]),please choose [Custom Mode] in "Operating
Mode" and [Enable] in "Turbo Mode" located under
"System Setting" submenu.
.
Chapter 3
System configuration and boot management
37