Network - Lenovo ThinkSystem MX3520 Manual

Full Mirror
Partial Mirror
Mirror Below 4GB
Partial Mirror Ratio In Basis
Points
RAM Disk Configuration
Item
Disk Memory Type
Create raw
Create from file
Create RAM disk list
Remove selected RAM disk(s)

Network

This menu displays network devices and network related setting.
24
ThinkSystem Server with Intel Xeon SP (1st, 2nd Gen) UEFI Manual
Full mirroring reduces the available system memory by
• Disable
half of the total installed memory.
• Enable
Partial mirroring reduces the available system memory by
• Disable
percentage of up to 50% per processor. The percentage
• Enable
is set by Partial Mirror Ratio In Basis Points.
Note: Partial Memory Mirroring is a sub-function of
memory mirroring. It requires to follow the memory
population for memory mirroring.
Mirrors all available system memory below the 4GB
• Disable
address limit when enabled; typically 1 to 3 GB.
• Enable
Note: Note: This item is only displayed when "Partial
Mirror" is set to Enabled.
200 Configure the memory mirror ratio for the memory above
4 GB in basis points value. The valid range is 1 – 5000,
meaning 0.01% to 50%. For example, to mirror 12.75%
of memory, input the value 1275.
Note: This item is only displayed when "Partial Mirror" is
set to Enabled.
Description
Options
Specify type of memory to use from available memory
• Boot Service
pool in system to create a disk. Boot Service Data is the
Data
default setting.
• Reserved
N/A Create a raw RAM disk.
N/A Create a RAM disk from a given file.
N/A Specify RAM disk list.
N/A Remove selected RAM disk(s)