Video Connections; S Video Terrninal <A; Component Video Terminal <B); Composite Video Terminal (1, 2) <C ) - Yamaha DVD-S540 Owner's Manual

Preparation
Video Connections
If your AV receiver has vdeo output jacks,
connect your receiver (and then to your TV) so
that you can use one TV for several d ffierent
video sources (LD, VGR etc,) by simply swrtching
the input source selector of your receiver
The player has th nee types of video output jacks.
Use one of them in accordance with the input
jacks of the equipment to be connected,
S-Video terminal <A>
S (separate) video connect on achieves a dearer
picture than composite video connect on by
sepJat ng color- and luminance when transmitting
signals, Use commercially available S-video cable.
Receiver (and TV) w}th S-video }nput is required,
Component Video terminal <B>
Component video connection achieves high
fidelLty in reproducing colol_s (better perfon_ance
than Svdeo connect on), separating video signal
into luminance (Y, termina] color-coded as green),
and color difference (Pb, blue/Pr, red). Use
commercially avalable coaxial cables. Receiver
(and TV) wtth component input is required.
Observe the color of each jack when connect}ng.
If your receiver does not have compone_t output
jacks, connecting the player's component output
directly to your TV's component input can
reproduce better video image,
Composite Video terminal (1, 2) <C>
Use aud o/v deo cable suppled with this unit
when connecting the player to a TV.
VIDEO 1, 2 jacks of VIDEO OUT output the
same signal You can connect one to your
receiver's input using supplied Audio/Video cable,
and the other to another receiver or a TV.
6