■ Connecting to the component/video jack
– You can enjoy accurate color reproduction and high quality images through the component jacks.
– Firmly connect a component video cable (commercially available) or a video pin cable to the COMPONENT jacks/
VIDEO jack.
– When the HDMI setting under the Video Out Select setting (p. 36) is set to 720p or higher, analog video output
signal is muted.
– See page 39 for information on the video output formats.
Caution!
Do not connect the power cable of this Player until all connections are completed.
B
To component
input jacks
AV receiver
Notes
– If you play back the image via VCR, the image may deteriorate due to the copy guard function.
– To enjoy Blu-ray 3D discs on this Player, you need to connect an AV receiver, a TV, and this Player using HDMI
cables. See page 14.
Downloaded From Disc-Player.com Yamaha Manuals
Video connections
This Player
VIDEO OUT
DIGITAL OUT
COAXIAL
Y
P
HDMI
B
NETWORK
VIDEO
P
OPTICAL
R
USB
COMPONENT
To COMPONENT
jacks
Component video cable
(commercially available)
COMPONENT IN
P
R
(Red)
P
B
(Blue)
Y
(Green)
TV
B'
AV receiver
This Player
VIDEO OUT
DIGITAL OUT
COAXIAL
Y
P
HDMI
B
NETWORK
VIDEO
P
OPTICAL
R
USB
COMPONENT
(Yellow)
To VIDEO
jack
Audio/Video cable
(supplied)
C
To video
input jack
(Yellow)
VIDEO
AV INPUT
2
C'
TV
15
En