Raynor eurotech RYZE-BLK Assembly Instructions Manual page 5

RYZE-BLK
Remove all items from the carton. Verify all components before assembly.
STEP 5
G
Use the correct Mechanism Bolts (J) and Back Bolts (I),
Assemble the Mechanism (G) to the Seat Cushion (B),
using 2 Mechanism Bolts (J) and 2 Back Bolts (I), Tighten
the bolts securely with the Allen Wrench (M).
• USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
• DO NOT USE THIS CHAIR AS A STEP STOOL / LADDER.
• DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT.
• DO NOT USE CHAIR ON UNEVEN FLOOR SURFACES.
• DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE TIGHTENED.
• EVERY SIX MONTHS , PLEASE MAKE SURE ALL BOLTS , SCREWS AND KNOBS
ARE FULLY TIGHTENED TO ENSURE STABILITY
B I
M
J
PREVENTIVE MAINTENANCE AND WARNING !
.
STEP 2
STEP 6
Now turn the assembled seat upright and locate the center
hole of the Mechanism over the Seat Post. Push down
firmly until the connection is secure.
• IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE
PRODUCT UNTIL REPAIR ARE MADE USING FACTORY AUTHORIZED PARTS.
• DISPOSE OF PACKAGING PROPERLY. PLASTIC BAG IS NOT A TOY. DO NOT USE
PLASTIC BAG AS HEAD COVERING – IT MAY CAUSE SUFFOCATION.
• FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
• NOTE: SOME SCREWE MAY BE PREASSEMBLED. IF PREASSEMBLED, IGNORE
ASSEMBLY INSTRUCTIONS.