Front View Of The Cpu Without Front Flap And View From Below - Siemens SIMATIC S7-1500 Manual

Reference
You will find detailed information on the individual display options, a training course and a
simulation of the available menu commands in the SIMATIC S7-1500 Display Simulator
(https://support.industry.siemens.com/cs/ww/en/view/109761758).
3.5.2

Front view of the CPU without front flap and view from below

The figure below shows the operator controls and connection elements of the
CPU 1516-3 PN/DP.
①
②
③
④
⑤
⑥
⑦
⑧
Figure 3-4 View of the CPU 1516-3 PN/DP (without front flap) – front
NOTE
Removing the display
Only remove the display if it is faulty.
You can find information on removing and replacing displays in the S7‑1500, ET 200MP
system manual (http://support.automation.siemens.com/WW/view/en/59191792).
CPU 1516-3 PN/DP (6ES7516-3AP03-0AB0)
Equipment Manual, 11/2023, A5E46418484-AD
LEDs for the current operating state and diagnostic status of the CPU
Display
PROFIBUS interface (X3)
Arrow keys
LED displays for the PROFINET interface
STOP and RUN operating mode buttons
STOP-ACTIVE LED
Connector for the supply voltage
Product overview
3.5 Operating and display elements
29