Recording To Mds And Laniues 31 Cassette Tapes - Panasonic DVD-LA85 Operating Instructions Manual

Recording to MDs and cassette tapes
Analogue recording
You can record to an MD or cassette
deck without sound being affected by
copy guards if you use analogue con-
nection.
E To make an analogue recording
1. Connect the recording equipment
with a stereo connection cable
(™ pages 34 and 36).
e When connecting directly, use the
same method used for connecting
a 2-channel amplifier or mini-
system (= page 36).
2. Set "7 Speaker Setting" to
"2-channel" (œ page 38).
elf this is set to "Multi-channel",
only the audio for the front
2 speakers will be recorded,
Digital recording
You can record the digital signal directly
onto an MD. All signals will be converted to
48 kHz linear PCM.
Ensure the following conditions are met.
eThere is no copy guard recorded on the
disc.
eThe recording equipment can handle a
sampling frequency of 48 KHz/16 bit.
E To make a digital recording
1. Connect the recording equipment with
an optical fiber cable ( pages 35 and
36).
eWhen connecting directly, use the
same method used for connecting a
2-channel digital amplifier or mini-
system (= page 36).
2. Change the digital audio output settings
(= page 40).
Change the settings as follows.
PCM Down Conversion: Yes
Dolby Digital/DTS Digital Surround:
PCM
mo
Ex]
=
gw
pen
k
-
aw
jam
=
=
=]
>-
k=
[=]
LL.
RQT5602