Advertisement
Quick Links
PCS99B/UC
!
·
For indoor use only.
·
For use on a normally dry work surface.
·
If any malfunction occurs, do not attempt to disassemble or
repair.
·
Avoid placing the charger in a high temperature environment
or near fire.
SPECIFICATIONS
·
6 ft. cord length.
·
USB-A and USB-C are for charging use only.
1
1/4"
Determine the position and location of the PCS99B/UC
underneath the edge of the work surface. DO NOT place unit
where the cable is strained or trapped. Allow 1/4" clearance
from the edge.
2023.09.21
WARNING
!
2-13/16"
TOP VIEW
Work Surface
(Not Included)
6-1/2"
6" C.T.C.
1-5/8"
C.T.C.
4X
3/16" DIA.
COUNTERSUNK
TO 5/16" DIA.
2
Mounting Screws
Use the (4) No. 6 mounting screws to secure the
PCS99B/UC under the work surface. ( Note: Use appropriate
screws and screw length depending on the
table type and thickness.)
1
TABLE OF CONTENTS
. . . . . . . . . . . . 1X PCS99B/UC
. . . . . . . . . . . . 2X Wire Guide
. . . . . . . . . . . . . . 2X 1/2"
No. 10 Pan Head
SIDE VIEW
4X
No. 6
(Not Included)
Wood Screw
1/8"
1-11/16"
Advertisement
Related Manuals for Mockett PCS99B/UC
Summary of Contents for Mockett PCS99B/UC
- Page 1 WARNING TABLE OF CONTENTS · For indoor use only... . . 1X PCS99B/UC · For use on a normally dry work surface. · If any malfunction occurs, do not attempt to disassemble or repair.
- Page 2 PCS99B/UC Wire Guide 1/2"No. 10 Pan Head Wood Screw Align the (2) 1/2" No. 10 pan head wood screws with the mounting holes on the wire guides to lock the cord in place Place power cord into (2) wire guides.
Need help?
Do you have a question about the PCS99B/UC and is the answer not in the manual?
Questions and answers