Page 2
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
Page 3
Preface About This Manual This user's guide is written for system integrators, PC technicians, and knowledgeable PC users. It provides information for the installation and use of the AOC-MTG-b2T and AOC- MTG-b2TM add-on cards. About This Add-On Card The Supermicro...
Page 4
• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm • If you have any questions, please contact our support team at: support@supermicro.com This manual may be periodically updated without notice. Please check the Supermicro website for possible updates to the manual revision level.
Congratulations on purchasing your add-on card from an acknowledged leader in the industry. Supermicro products are designed with the utmost attention to detail to provide you with the highest standards of quality and performance. For product support and updates, please refer to our website at http://www.supermicro.com/products/nfo/networking.cfm#adapter.
Note: Please note that this product is sold only as part of an integrated solution with Supermicro server systems. 1.4 Compliance Operating Environment The AOC-MTG-b2T/-b2TM add-on card is compliant with the following environmental regulations: • RoHS Compliant 6/6, Pb Free •...
Super AOC-MTG-b2T/-b2TM User's Manual 2.2 Major Components The following major components are installed on AOC-MTG-b2T and AOC-MTG-b2TM: AOC-MTG-b2T/-b2TM Major Components Component Name Definition Broadcom BCM57416 10GbE LAN controller ® 1-2: I2 Address Mode ARP Mode 2-3: I2 Address Mode Fixed, 0x30...
Chapter 2: Hardware Components 2.3 LAN Ports and LAN LED Indicators LAN Ports There are two LAN ports on the AOC-MTG-b2T and AOC-MTG-b2TM. These LAN ports support connection speeds of 10 Gbps. Please use RJ45 type LAN cables. LAN Port LED Indicators Each LAN port has two LEDs to indicate speed and data activity.
Super AOC-MTG-b2T/-b2TM User's Manual Chapter 3 Installation 3.1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid damaging your add-on card, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD.
Chapter 3: Installation 3.2 Before Installation To install the add-on card properly, be sure to follow the instructions below. 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry-standard anti-static equipment (such as gloves or wrist strap) and follow the instructions listed on page 18 to avoid damage caused by ESD.
Super AOC-MTG-b2T/-b2TM User's Manual 3.3 Installing the Add-on Card Follow the steps below to install an add-on card into your system. (If the system is fixed onto a rack, the removal of the server top cover is not required. If the system is not anchored to a fixed structure, it is recommended to remove the system top cover for ease of installation).
1. Install the SIOM card into the motherboard. 2. Tighten the screw. 3. Install the bracket onto the chassis 4. Install the motherboard in the chassis Note: Supermicro recommends that this SIOM card be installed by a system integrator or by the manufacturer.
Super AOC-MTG-b2T/-b2TM User's Manual 3.5 Installing the Add-on Card with Swappable Bracket Follow the steps below to install the add-on card into your system that supports a swappable bracket. The add-on card must be installed in the swappable bracket before it can be installed in the system.
1. Run CDR-NIC. (If you do not have a product CD-ROM, download drivers from the Supermicro Support Website and then transfer them to your system.) 2. When the SUPERMICRO window appears, click on the computer icon next to the product model.
Super AOC-MTG-b2T/-b2TM User's Manual 3.7 Installing Drivers on Linux (for Broadcom BCM57416) ® Download the drivers from Intel Download Center or the Supermicro site at https://www. supermicro.com/wftp/Networking_Drivers. Linux Drivers Use the following procedures to install drivers on the Linux operating system. Download the drivers from ftp://ftp.supermicro/Networking_Drivers/.
Page 25
(Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
Need help?
Do you have a question about the AOC-MTG-b2T and is the answer not in the manual?
Questions and answers