Options - Electrolux GA60LI221 User Manual

OPTIONS

MULTITAB FUNCTION
Activate this function only when you use
the combi detergent tablets.
This function deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
Activating the multitab
function
Activate or deactivate the multitab
function before the start of a pro-
gramme. You cannot activate or
deactivate this function while a pro-
gramme operates.
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press the multitab button, the multitab
indicator comes on.
The function stays on until you de-
activate it. Press the multitab but-
ton, the multitab indicator goes off.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
ENERGY SAVER
Activate or deactivate the Energy
Saver function before the start of a
programme. It is not possible to
activate or deactivate this function
while a programme operates.
This function decreases the temperature in
the drying phase. The energy consumption
decreases by 25%.
The dishes can be wet at the end of the
programme. We recommend that you keep
the door ajar and let the dishes dry.
ENGLISH 73