Table of Contents
Advertisement
Note:
The automatic floating hair
•
collection system pauses when the
front cover is opened. It resumes
operation as soon as the front cover
is securely closed.
After the cleaning process is
•
finished, the hair scraper resets to its
origin position, and the white light
stripe transitions from a blinking
status to a steady, always on status.
During the cleaning process, if
•
the appliance is shut down or
experiences a power outage,
the cleaning process will be
canceled. The hair scraper will reset
automatically upon the next power-
on�
Please take out the pet hair
•
container in a parallel direction. You
can clean the container with clean
cloth after pour out the waste.
Please make sure the container is
dry if you use wet cloth or water to
clean it�
We recommend people who are
•
respiratory sensitive, not to clean
the pet hair container by themselves
or to take protective measures, such
as mask and gloves.
There is an automatic floating hair
•
cleaning count-down inside the
purifier, when the plug is on the
automatic count-down cleaning
will be start at 360 hours after
each floating hair cleaning. The
automatic count-down cleaning will
not operate if it's in sleep mode or
dark environment is detected.
EN
12
5 Cleaning and
maintenance
Note:
Always unplug the appliance before
•
you clean it.
Never immerse the appliance in
•
water or any other liquid.
Never use abrasive, aggressive, or
•
flammable cleaning agents such as
bleach or alcohol to clean any part
of the appliance.
Never use any liquids (including
•
water) to clean the filter.
Cleaning the body of the
air purifier
Regularly clean the inside and outside
of the air purifier to prevent dust from
collecting�
Use a soft, dry cloth to clean both
•
the interior and exterior of the air
purifier and the air outlet.
Cleaning the particle
sensor
Clean the particle sensor every 2
months for optimal functioning of the
appliance.
Note:
If the air purifier is used in a dusty
•
environment, it may need to be
cleaned more often.
If the humidity level in the room
•
is very high, condensation may
develop on the particle sensor and
the air quality light may indicate a
more poor air quality even though
the air quality is actually good.
Advertisement
Table of Contents
